Description
SPECIFICATIONS
Brand Name: NoEnName_Null
Origin: Mainland China
Certification: none
Smart home platform: other
Model Number: 24042601
Locking Hardware for Steel Ammo Can
Instructions:
1) Close the lid and latch of the ammo can and mark the center of the hole
where the locking hardware will be installed (try to be exact!)
2) Drill a 5/16''hole into the can at the center mark (drilling out a smaller
guide hole beforehand may be helpful)
3) Form the outside of the can,insert the locking stud through the drill hole
4) On the inside of the can,put the neoprene washer over the threads of the
locking stud,followed by the small washer,and then the nylon lock nut.Tighten
the assembly with a wrench,being aware that the ''round'' side of the locking
stud may have sharp edges/burs,so a tool should be utilized on''round''side,not
bare hands
5) For ammo cans with large holes,put the large washer between the ammo can's
latch and the padlock in order to prevent the large latch hole from slipping
over the padlock
-If you finshin the assembly and find the locking stud is not centered,simply
file or drill the ammo can's latch holes to be larger until the latches
properly fit the locking stud
Note:
You will only get the Gun lock kit , others are not included
Notice:
50cal can ammo hole dimension is 1/2''
you need to enlarge it,otherwise the lock hardware kit cannot be passed through.
지불 및 보안
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.