Description
SPECIFICATIONS
Brand Name: JERBOR
Origin: Mainland China
Special Features: Interior Door Handle
Item Width: 6cm
Country/Region of Manufacture: China
Item Height: 4cm
Interchange Part Number: Interior Door Handle
Item Weight: 1.21kg
Manufacturer Part Number: For 2006-2012 Mitsubishi ECLIPSE
OEM NO.: For 2006-2012 Mitsubishi ECLIPSE
Other Part Number: Left Right
Placement on Vehicle: left
Material Type: Pull the door handle
Item Length: 30cm
Choice: yes
semi_Choice: yes
Brand new custom made interior pull door handles set, (Both handles driver and passenger) Fits All 2006 - 2012 Mitsubishi Eclipse & Spyder.
These custom handles will make your doors look great, they can be used to replace your already broken handles or as an upgrade, if you like to save money, then why buy another plastic handles that eventually will break again, our handles are made out of 6061 aluminum aircraft grade solid bar and manufactured using state of the art CNC machining equipment.
Many parts will fit European, Middle Eastern, Asian, Australian, & African market vehicles but I have no way to verify what will fit. You can get the Mitsubishi Part number from a local source, and compare it to the part number on the listing.
Installing steps:
1. Pull the handle cover off and remove the two bolts are underneath, gently pull the handle to see if comes off, if not, you have to remove the panel to access the two screws that hold it from the back.
2. Access the bolt that is under door opener handle by removing the plastic cover with a small flat screwdriver, remove the other two bolts that hold the panel.
3. Now pull the door panel, then slides it up holding both sides and watch out for the wire connectors.
4. Disconnect the wires door connectors using the screwdriver by pushing down the small tabs and pulling at the same time .
5. Remove the two screws.
6. Now reverse the above steps to put back the panel.
7. Now assemble the handles to install them, do not tighten all way down at the first attempt alternate when tightening the bolts
These custom handles will make your doors look great, they can be used to replace your already broken handles or as an upgrade, if you like to save money, then why buy another plastic handles that eventually will break again, our handles are made out of 6061 aluminum aircraft grade solid bar and manufactured using state of the art CNC machining equipment.
Many parts will fit European, Middle Eastern, Asian, Australian, & African market vehicles but I have no way to verify what will fit. You can get the Mitsubishi Part number from a local source, and compare it to the part number on the listing.
Installing steps:
1. Pull the handle cover off and remove the two bolts are underneath, gently pull the handle to see if comes off, if not, you have to remove the panel to access the two screws that hold it from the back.
2. Access the bolt that is under door opener handle by removing the plastic cover with a small flat screwdriver, remove the other two bolts that hold the panel.
3. Now pull the door panel, then slides it up holding both sides and watch out for the wire connectors.
4. Disconnect the wires door connectors using the screwdriver by pushing down the small tabs and pulling at the same time .
5. Remove the two screws.
6. Now reverse the above steps to put back the panel.
7. Now assemble the handles to install them, do not tighten all way down at the first attempt alternate when tightening the bolts
지불 및 보안
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.