Description
Daytime running lights exist for one reason: a moving car that is seen is a car that is safe. The Daylight Edge is a 20 piece set of 17cm LED daytime running light strips that make your vehicle visible from distance in daylight, in rain, and in the low-light hours when most accidents happen. It is the cheapest insurance a driver can bolt to a bumper.
Each strip uses bright surface mount LEDs in a slim 17cm housing that mounts flat against the bumper, grille, or lower valence. The LEDs are sealed in a waterproof housing rated for the spray, mud, and road salt that a front end sees every week, and the 12V direct wiring connects straight to the vehicle electrical system with the included leads. The light output is bright enough to register as a presence during the day, which is the entire job of a DRL, without being harsh enough to glare at oncoming traffic at night.
Installation takes an afternoon with basic tools. Mount the strips with the included brackets or double-sided tape, run the leads to a 12V source switched with the ignition, and the vehicle announces itself every time it moves. The set of 20 covers a pair of vehicles, or a full front treatment with spares for the fog light pockets. For motorcycle riders, the compact strips mount cleanly on fork legs and fairings where a full DRL kit will not fit.
Being seen is not a luxury. It is a wiring job.
Key Features
- ✦ 20 strips of 17cm LED daytime running lights
- ✦ Waterproof sealed housing for all weather driving
- ✦ 12V direct connect for cars, trucks, and motorcycles
- ✦ Bright surface mount LEDs for daylight visibility
- ✦ Slim profile that mounts flat to bumpers and grilles
- ✦ Brackets and adhesive tape included for mounting
- ✦ Enough strips for two vehicles or a full front kit
Technical Specifications
- Length: 17cm per strip
- Quantity: 20 strips per set
- Voltage: 12V DC
- Waterproofing: Sealed, weather rated
- LED Type: Surface mount, bright white
- Item Type: Daytime running light strip
- Mounting: Brackets and adhesive tape
- Wiring: Direct 12V with leads
- Use: Cars, trucks, motorcycles, off-road
- Origin: Mainland China
Who It Is For
The Daylight Edge fits the daily commuter who wants extra presence in traffic, the off-road and 4x4 owner building a proper light setup, the motorcycle rider who needs visibility without a full fairing kit, and the fleet owner who knows that accident prevention starts with being seen. It also suits the DIY driver who wants a factory DRL look on a vehicle that never had one, since the slim strips follow bumper lines cleanly and the 12V wiring is straightforward for anyone comfortable with a multimeter.
Frequently Asked Questions
Q: Are these legal for road use?
A: Daytime running lights in the correct position and brightness are legal in most regions. Check local regulations for color and placement, and wire them to run with the ignition so they switch off with the engine.
Q: How do I wire them to my vehicle?
A: Connect the positive lead to a 12V source switched by the ignition and the negative to ground. A fuse in the positive line is recommended, and heat shrink over the connections keeps the install watertight.
Q: Will they survive heavy rain and washing?
A: Yes. The housings are sealed against moisture, so pressure washing, heavy rain, and snow spray will not get inside. Mount them with the connector pointing down when possible for extra protection.
Q: Can I install these on a motorcycle?
A: Yes, the compact strips mount well on fork legs, mirrors, and fairings. They add a significant visibility boost for riders, where being seen is often the difference between a near miss and a collision.
Q: How bright are they compared with factory DRLs?
A: They produce a comparable daylight-visible output to many factory systems. They are designed to be seen, not to be a light bar, so output stays appropriate for traffic without dazzling oncoming drivers.
Q: Why do I get 20 strips?
A: Twenty strips cover a full front treatment on one vehicle with spares, or a pair of vehicles if you use two per side. The extras also make it easy to replace a damaged strip without ordering again.
Q: Do I need a relay or controller?
A: For basic DRL operation, no. Wire them to the ignition switched 12V with an inline fuse. If you want them to dim with the headlights or switch off with high beam, add a simple DRL controller module.
Q: What color temperature do the LEDs emit?
A: They emit a bright white light in the 6000K range, which is the standard daylight color used by most factory DRL systems. It reads as daylight to other drivers and stands out against headlights and taillights.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.