The Forge Line | 1.75 mm ABS Filament Bulk Bundle

20%セーブ
East Supplier PlatformSKU: 1005007416252099-10KG ABS Black-UNITED KINGDOM

Color: 10KG ABS Black
価格:
$207.30 $259.12

送料計算済み チェックアウト時

在庫:
在庫あり

説明

ABS is the material that gets handed the jobs PLA cannot survive. Underhood brackets, tool housings, drone frames, the clamp that holds a work light to a scaffold rail. It keeps its shape at temperatures that soften PLA, and it takes a knock without cracking along the layer line.

This is the JAYO ABS range in bulk form, wound at 1.75 mm with a diameter tolerance held to plus or minus 0.02 mm. That roundness matters more than the sales sheet suggests. A strand that varies by a tenth of a millimeter changes the melt pressure in the nozzle, and the extruder starts laying down walls that look fine until you sand them. Consistent diameter is what makes a print farm predictable across a whole weekend of work.

Bulk bundles suit anyone whose printer runs more than a few hours a week. The spool core is deliberately wide so the strand pays out without tightening against itself, and the boxed packing keeps the filament dry until the seal is broken. Print settings stay in the familiar ABS range: 230 to 260 degrees at the nozzle, 80 to 120 degrees on the bed, 50 to 100 mm per second.

Buy material by the bundle and the printer stops being the limiting factor in the shop.


What The Material Actually Does

  • ✦ 1.75 mm diameter held to plus or minus 0.02 mm across the full run
  • ✦ ABS body rated for functional parts that see heat, load and vibration
  • ✦ Impact resistance that survives drops, clamping and rough handling
  • ✦ Consistent roundness for steady extrusion on long unattended prints
  • ✦ Wide spool core so the strand unwinds without tightening on itself
  • ✦ Runs on any FDM printer already set up for 1.75 mm filament
  • ✦ Boxed packing keeps moisture out until the first print of the bundle

ABS Filament Specification

  • Material: ABS (acrylonitrile butadiene styrene)
  • Diameter: 1.75 mm
  • Diameter tolerance: plus or minus 0.02 mm
  • Bundle sizes: 5 kg and 10 kg, black
  • Form: Solid filament on spool
  • Nozzle temperature: 230 to 260 degrees C (446 to 500 degrees F)
  • Bed temperature: 80 to 120 degrees C (176 to 248 degrees F)
  • Print speed: 50 to 100 mm/s
  • Shelf life: 12 months in the sealed box
  • Packing: Boxed, factory sealed

Who Buys ABS In Bulk

['Print farms buy ABS bundles because the material cost per finished part falls once the spool stops running out mid-job. Workshops use it for jigs, fixtures and drill guides that would deform if cut from PLA. Hobbyists who print functional replacements for appliances, garden tools and vehicle trim get a material that behaves like the molded plastic it replaces. The 5 kg bundle suits a single printer working a few hours a day; the 10 kg bundle fits a small farm running two or three machines through the week.']

Ten Questions Before You Order

Q: Does ABS need an enclosed printer?

A draught-free room is enough for small parts. For anything taller than about ten centimeters, an enclosure holds the chamber warm and stops the corners lifting. If your printer has no enclosure, a cardboard box over the frame during the print does the same job.

Q: What bed surface works best with this filament?

PEI sheet at 100 degrees C holds ABS well. Glass with a thin layer of ABS slurry or a glue stick is the traditional fallback and releases cleanly once the bed cools to room temperature.

Q: How is a 5 kg or 10 kg bundle packed?

The filament ships as factory-sealed spools inside one carton. How the weight is split across spools depends on the bundle size you order, and every spool in the box is wound to the same diameter specification.

Q: Will it fit my printer?

Yes, if the printer accepts 1.75 mm filament, which covers the large majority of FDM machines sold in the last decade. The spool mount needs to handle the weight of a bulk spool, so check your holder or print a spool arm that rests on bearings.

Q: Why does diameter tolerance matter so much?

The extruder meters filament by length, so the volume delivered depends on the cross-section. A strand that drifts from 1.72 to 1.78 mm changes the flow by roughly seven percent, which shows up as inconsistent walls and blobby seams. Holding plus or minus 0.02 mm removes that variable.

Q: How should I store filament between prints?

Keep the sealed spools closed until you need them. Once opened, a dry box or a sealed tub with desiccant holds ABS at the moisture level it likes. Wet ABS prints with a popping sound and a rough surface finish.

Q: How do I stop large ABS parts from warping?

Drop the bed temperature after the first layer to about 100 degrees C, add a brim of eight to ten lines, and keep the chamber warm and still. A part cooling fan on ABS should run at zero for the first thirty layers.

Q: What is the shelf life?

Twelve months from production when the box stays sealed. Opened spools last indefinitely in a dry box and can be refreshed with a few hours at 70 degrees C in a filament dryer.

Q: How is this different from ASA?

ASA adds UV and weather stability, which is why it suits outdoor parts that sit in sunlight. ABS stays the workhorse for indoor functional parts where impact strength and heat resistance are the priority. The JAYO range covers both, and this listing ships ABS.

Q: Does a larger bundle lower the price per kilogram?

Yes. The 10 kg bundle carries a lower cost per kilogram than the 5 kg bundle, which is why print shops order the larger size once a material has proven itself on their machines.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
B
Bastien L.
Bought the 10 kg for the shop

We run jigs and drill guides for a small fabrication shop and PLA kept softening near the welder. The 10 kg bundle brought the cost per part down and the parts hold shape. Bed at 100 C with PEI and no adhesion aids.

H
Helena W.
Good ABS, needs the usual enclosure

The material behaves exactly like ABS should. Corners lifted on a tall box until I put a cardboard enclosure over the frame, then everything sat flat. Diameter measured 1.75 on a caliper across ten spots.

C
Corin M.
Five kilos went further than I expected

Ran the 5 kg bundle through two printers over three weeks of bracket work and never had a diameter issue. Walls come out even and the melt is consistent at 245 C. The wider spool core makes a real difference on a long print.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen