説明
Rolling by hand is a skill that costs a few seconds per cigarette and a few cigarette papers per mistake. The Ember Wright turns that into a single motion. Tobacco goes into the chamber, the tube is seated, and the machine fills and finishes the cigarette while the operator does nothing except keep the supply topped up. The infrared sensor watches the cycle and cuts the power when the work is done, so there is no switch to hold and no motor left running at an empty chamber.
The body is built from stainless steel, alloy and ABS, a combination chosen for hygiene and for the torque the fill mechanism needs. Two tube diameters are supported, 6.5 millimetres and 8 millimetres, which covers standard and larger diameter tubes, and the unit records how many cigarettes have been produced in the current session. The counter range runs from 5 to 50 and resets when the power is interrupted, functioning as the factory test record rather than a lifetime total.
Tobacco preparation decides the result more than the machine does. The recommended moisture range is 16 to 28 percent, dry and finely chopped. Damp tobacco compresses into a cigarette that draws badly, and waiting about 24 hours after filling lets a tight cigarette settle into something smokeable. Each set ships with the adapter, plugs, a brush and a stir bar, in a presentation box that suits a gift as readily as a workbench.
A machine does the rolling. You keep the choice of tobacco.
Key Features
- ✦ Infrared sensing automatically powers off when a cigarette is finished.
- ✦ Supports both 6.5 mm and 8 mm tube diameters.
- ✦ Session counter records between 5 and 50 cigarettes before resetting.
- ✦ Stainless steel, alloy and ABS construction for durability and easy cleaning.
- ✦ Lacquered finish with a presentation box suitable for gifting.
- ✦ Ships with adapter, plugs, brush and stir bar for maintenance.
- ✦ Beginner friendly, with a finished cigarette in a few seconds.
Technical Specifications
- Type: Electric cigarette rolling and tobacco filling machine
- Materials: Stainless steel, metal alloy, ABS
- Finish: Lacquer
- Tube Diameters: 6.5 mm and 8 mm
- Control: Infrared sensing with automatic power off
- Counter: Session counter, range 5 to 50, resets after power interruption
- Recommended Tobacco Moisture: 16 to 28 percent
- Tobacco Preparation: Dry and finely chopped to avoid jamming
- Settling Recommendation: Leave finished cigarettes for about 24 hours before use
- Included Accessories: Adapter, plugs, brush, stir bar
- Packaging: Presentation box, suitable as a gift
- Variants Listed: EU and Black counting options
- Origin: Mainland China
Where It Belongs
Home use for anyone who buys loose tobacco and wants a consistent cigarette without the hand rolling routine. It also suits small workshops and market sellers who fill tubes in batches, because the session counter and the automatic shutoff mean the machine can be loaded and left to cycle while other work continues. The presentation box makes it a straightforward gift for a smoker who already has a preferred tobacco.
Frequently Asked Questions
Q: What tube sizes does it accept?
Both 6.5 millimetre and 8 millimetre tubes are supported, so standard and larger diameter cigarettes can be produced on the same machine.
Q: How does the infrared sensing work?
The sensor detects the end of the filling cycle and cuts power automatically. There is no trigger to hold, and the motor does not run against an empty chamber.
Q: What does the counter show?
It records the number of cigarettes produced in the current session, with a range between 5 and 50. The count restarts if the power is interrupted.
Q: What tobacco should I use?
Dry, finely chopped tobacco with a moisture content between 16 and 28 percent. Tobacco that is too wet jams the mechanism and produces a cigarette that draws poorly.
Q: The cigarettes feel too tight. What should I do?
Leave them for about 24 hours. A freshly filled cigarette settles as the moisture evens out, and the draw improves. If they remain tight, reduce the tobacco moisture before the next batch.
Q: What comes in the box?
The rolling machine, the adapter and plugs, a cleaning brush, a stir bar and the presentation packaging.
Q: How do I clean the machine?
Empty the chamber of loose tobacco after use and clear the fill channel with the brush supplied. A dry brush is enough for routine cleaning. Avoid washing the electrical body, and keep solvents away from the lacquered finish.
The EastSupplier Promise
Each machine is tested through a full filling cycle before dispatch and shipped with tracked delivery. Because the plug type and variant differ by region, our team confirms the option against your destination before the order is packed, and the supplied brush and stir bar are checked against the packing list.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません