The Anchor | 15W Magnetic Wireless Fast-Charging Dashboard Mount

20%セーブ
EastSupplier PlatformSKU: 1005009290209788-B

Color: B
価格:
$30.26 $37.83

送料計算済み チェックアウト時

在庫:
在庫あり (600個), 出荷準備完了

説明

Your phone is not a phone. It is a navigation system, a communication hub, a music library, and — increasingly — the command center of your vehicle. Yet the ritual of plugging it in every time you enter the car has not evolved since the first cigarette-lighter USB adapter appeared two decades ago. The Anchor changes this. A single magnetic surface, engineered with a precision array of neodymium magnets aligned to the Qi wireless charging coil, holds your phone in place while delivering 15 watts of fast-charging power — all without a cable.

The engineering challenge of magnetic car mounts has always been a tradeoff between grip and accessibility. Too strong a magnet, and removing the phone becomes a two-handed wrestling match. Too weak, and the first pothole sends the device flying. The Anchor solves this through magnet geometry rather than brute force: a Halbach-array-inspired configuration that concentrates magnetic flux toward the phone while minimizing stray fields that could interfere with the Qi charging field. The result is a mount that holds through aggressive cornering and releases with a deliberate quarter-turn — no suction cups, no spring-loaded claws, no plastic arms that snap after six months of summer dashboard heat.

The mounting base attaches to your dashboard or windshield via a thermal-resistant adhesive pad rated to 90°C — the kind of temperature a closed car reaches in Phoenix in July. The ball joint offers 360-degree rotation and 45-degree tilt, accommodating landscape navigation, portrait calls, and every angle in between. A single USB-C port on the base accepts power from any standard car charger. The coil alignment guide — an almost invisible etched ring on the charging surface — ensures perfect Qi coupling every time. You do not place your phone on The Anchor. You dock it. And in that distinction lies the difference between a gadget and an instrument.

Cables are tethers. Magnets are commitments. Choose accordingly.

Key Features

  • 15W Qi Fast Wireless Charging — Delivers rapid charge to iPhone (MagSafe-compatible) and Qi-enabled Android devices without cable insertion fatigue
  • Halbach-Inspired Magnet Array — Concentrates magnetic flux toward the device; secure grip through corners, deliberate release with a quarter-turn
  • Thermal-Resistant Adhesive Mount — Rated to 90°C (194°F); survives closed-car dashboard temperatures in desert summers without softening or detachment
  • 360° Rotation + 45° Tilt Ball Joint — Infinite orientation flexibility; landscape GPS, portrait calls, or angled for glare-free visibility
  • Coil Alignment Guide Ring — Subtle etched indicator ensures perfect Qi coupling on first placement, maximizing charge efficiency
  • Single USB-C Power Input — Universal connector; works with any standard USB-C car charger (charger not included)

Technical Specifications

  • Charging Standard: Qi wireless (15W max output)
  • Compatibility: iPhone 12-16 series (MagSafe), Qi-enabled Android devices
  • Magnet Type: Neodymium (NdFeB), Halbach-inspired array
  • Mount: Dashboard/windshield adhesive, heat-rated to 90°C
  • Rotation: 360° swivel, 45° tilt range
  • Power Input: USB-C (5V/3A, 9V/2A, 12V/1.5A)
  • Charging Efficiency: ≥73% (Qi-certified coil alignment)

Application Scenarios

The Anchor serves the rideshare driver who enters and exits the vehicle twenty times a day and cannot afford a ten-second cable-plugging ritual at every stop, the road-tripper navigating unfamiliar highways with GPS at full brightness and battery anxiety at full volume, and the daily commuter who wants the in-car experience to feel as seamless as walking through their front door — place the phone, it charges, done. It is equally at home on a delivery van dashboard, a semi-truck windshield, and a weekend-warrior Jeep whose owner has learned that suction cups and off-road trails are fundamentally incompatible.

Frequently Asked Questions

Q: Will The Anchor work with my phone case?

A: Magnetic attachment requires a MagSafe-compatible case (iPhone 12+) or a Qi-compatible phone with a magnetic ring plate applied to the case or phone back. The magnet array is optimized for direct MagSafe coupling. Cases thicker than 3mm or with metal credit card slots may reduce grip strength and charging efficiency.

Q: Can I remove and reposition the adhesive mount?

A: The adhesive pad is designed for permanent placement. If you must reposition, use a heat gun or hair dryer to warm the adhesive to approximately 60°C, then gently pry with a plastic tool. A replacement adhesive pad may be required for reinstallation. Clean the new surface with isopropyl alcohol before applying.

Q: Does the magnetic field affect my phone's compass or GPS?

A: The Halbach-inspired magnet configuration directs the field toward the phone's charging coil while minimizing stray fields. GPS and compass functions operate normally. If you notice compass calibration prompts, drive in a figure-eight pattern to recalibrate — this is standard for any magnetic mount.

Q: What charger should I use with The Anchor?

A: For full 15W output, use a USB-C charger capable of 12V/1.5A or 9V/2A output (Power Delivery or Quick Charge 3.0). Standard 5V/2A USB chargers will deliver approximately 7.5W — still functional but slower. The Anchor does not include a charger; use your existing car charger or purchase a compatible one separately.

Q: Will the adhesive survive extreme heat or cold?

A: The 3M VHB-grade adhesive is rated from -40°C to 90°C (-40°F to 194°F). It has been tested in Death Valley summer conditions and Minnesota winter conditions. Prolonged exposure to temperatures above 90°C may degrade the bond over time — avoid mounting directly above defroster vents that blow concentrated hot air onto the dashboard surface.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Alex N.
Clean dashboard, no cables, fast charging — exactly what I wanted

Installation took 30 seconds: peel the adhesive backing, press onto my dashboard, plug in the USB-C cable. The etched alignment ring makes it obvious where to place the phone for optimal charging. The Halbach magnet array is no gimmick — the phone holds firmly but releases with a deliberate quarter-turn rather than a wrestling match. My passengers keep asking where I got it.

J
Jennifer K.
Great magnet strength, check your case thickness

The magnetic grip is impressive — my phone snaps into place confidently and stays put through aggressive cornering. The 15W charging speed is genuine; I gain about 30% battery on a 30-minute commute. I deducted one star because my thick OtterBox case (about 4mm) reduces the grip slightly. With a MagSafe-compatible thin case, it is perfect. The adhesive has held through two weeks of 90°F+ parked-car temperatures.

C
Chris F.
Finally, a car mount that does not fall off the windshield

I have gone through four suction-cup mounts that all failed when summer heat softened the suction ring. This adhesive mount has survived July in Texas — the ball joint lets me angle my phone perfectly for GPS, and the magnetic hold is strong enough that my iPhone 15 Pro Max does not budge on bumpy roads. The wireless charging is a bonus; I no longer have a cable draped across my dashboard.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen