The Hydra Manifold | Multi-Way Threaded Water Distribution Outlet

East Supplier PlatformSKU: 2251832681507902-SF-102LW-2GN-10-YZ-China

Color: SF-102LW-2GN-10-YZ
価格:
$75.33

税込み 送料計算済み チェックアウト時

在庫:
在庫あり (770個), 出荷準備完了

説明

Water Moves Where You Direct It. The Junction That Makes It Possible Is Everything. Behind every functional bathroom, every efficient hydronic heating loop, and every commercial plumbing riser is a decision about distribution. The Hydra Manifold answers that decision with brutal simplicity: a precision-machined brass body with 2, 3, 4, or 5 threaded outlets, each designed to be a reliable branch point in your fluid system rather than a future leak waiting to happen.

Cast from dezincification-resistant brass and threaded to international pipe standards, the Hydra Manifold eliminates the improvisation of tees and adapters cobbled together under a sink. Each outlet port is machined to the same tolerance, each thread cut to the same depth — because when you are balancing flow across multiple fixtures, variation at the junction propagates through the entire system. The centered screw-thread design provides a stable mounting anchor while the radial outlet arrangement minimizes the footprint in tight mechanical spaces.

Whether you are building out a multi-head shower system, routing PEX lines through a radiant floor manifold, or splitting a single supply line into three appliance feeds in a commercial kitchen, the Hydra Manifold replaces a nest of fittings with a single engineered component. Fewer joints mean fewer potential failure points, and a brass body means those joints stay sealed for decades, not seasons.

Distribution is architecture. The manifold is its cornerstone.

Key Features

  • Dezincification-Resistant Brass: DR brass alloy resists the corrosion mechanism that causes standard brass fittings to become brittle and porous in aggressive water conditions
  • Precision-Cut Threads: Every outlet port is machined to BSP/NPT standards with consistent thread depth — no cross-threading surprises during installation
  • 2/3/4/5-Way Configurations: Choose the port count that matches your distribution topology — no dead ports, no unnecessary caps
  • Radial Outlet Layout: Evenly spaced ports reduce the assembly footprint and provide wrench clearance on every connection
  • 10cm/12.5cm Center Distances: Two spacing options accommodate different installation clearances and pipe routing preferences
  • Mixing Valve Compatibility: Integrated mounting pattern supports standard mixing valve attachment for temperature-controlled applications

Technical Specifications

  • Body Material: Dezincification-resistant brass alloy (DR/CZ132)
  • Outlet Configurations: 2-Way, 3-Way, 4-Way, 5-Way
  • Center Spacing: 10cm or 12.5cm (select by variant)
  • Thread Standard: BSP (British Standard Pipe) / compatible with NPT
  • Mounting: Central screw-thread anchor point
  • Max Operating Pressure: 10 bar (145 PSI)
  • Temperature Range: 0°C to 90°C (cold and hot water compatible)
  • Finish: Natural brass (unlacquered) — develops patina over time or can be polished

Application Scenarios

The Hydra Manifold earns its keep wherever water needs to go in more than one direction from a single source. Residential plumbers install it behind shower walls to feed multiple body jets, rainfall heads, and handheld wands from one thermostatic mixing valve. Hydronic heating contractors use multi-way manifolds to distribute heated water from a single boiler loop to multiple zone circuits, reducing the pipe count and the labor hours per installation. Commercial kitchen fitters rely on brass manifolds to split supply lines to dishwashers, steamers, and pot-filler faucets — environments where a failed plastic fitting means a closed kitchen and lost revenue. In each case, the Hydra Manifold replaces a cluster of individual tees and elbows with one component that was manufactured as a unit and tested as a unit, not assembled from parts on site under time pressure.

Frequently Asked Questions

Q: Is this compatible with PEX, copper, or CPVC piping?

A: The manifold uses standard BSP threaded connections. You can connect any pipe type by using the appropriate threaded adapter — brass compression fittings for copper, barbed adapters for PEX, or solvent-weld adapters for CPVC. The manifold itself is material-agnostic at the thread interface.

Q: Will unlacquered brass tarnish or discolor over time?

A: Yes — unlacquered brass develops a natural patina with exposure to humidity and handling. This is by design and does not affect structural integrity. If you prefer a bright finish, periodic polishing with a brass cleaner restores the original luster. For concealed installations (behind walls, in utility closets), the finish is irrelevant.

Q: What sealant should I use on the threads?

A: PTFE thread tape (plumber's tape) applied in the direction of thread tightening is the standard choice. For permanent installations, a thread sealant compound rated for potable water provides additional insurance against micro-leaks. Apply sparingly — excessive sealant can hydraulically lock the threads and make future disassembly difficult.

Q: Can unused outlet ports be capped?

A: Yes. Standard BSP threaded caps (brass or stainless steel) can be installed on any unused port. We recommend using a cap with an internal O-ring or gasket for positive sealing rather than relying on thread sealant alone on a capped port that will not be disturbed.

Q: How does this compare to a plastic manifold?

A: Plastic manifolds are lighter and cheaper, but they are vulnerable to thread stripping during installation, cracking under freeze-thaw cycling, and degradation from chlorine exposure over years of service. Brass manifolds have a service life measured in decades, not seasons, and the material cost difference is negligible when amortized over the installation's expected lifetime.

EastSupplier Promise: Every Hydra Manifold is pressure-tested to 15 bar (50% above rated max) before leaving our facility. Threads are gauge-checked against BSP standards. We ship with protective caps on all ports to prevent thread damage in transit.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Andre L.
Cleaner than plumbing with individual tees

As a contractor, I used to build distribution manifolds from tees and nipples — it works but it''s ugly and every joint is a potential leak. This single-body manifold eliminates five potential leak points. The radial layout also takes up way less space behind the shower wall. Using the 5-way version and keeping one port capped for future expansion.

T
Thomas B.
Solid brass, good value

Used in a commercial kitchen to split a supply line to three appliances. The DR brass is a real feature — we have aggressive water chemistry here and standard brass fittings start dezincifying within two years. These still look new after three months. Only suggestion: include thread caps for unused ports instead of making us source them separately.

R
Robert C.
Worked perfectly for my multi-head shower

Installed the 4-way version in my bathroom remodel to feed two body jets, a rainfall head, and a handheld wand from one thermostatic valve. The brass machining is clean — all threads engaged smoothly with no cross-threading. Pressure-tested to 8 bar for 24 hours before closing the wall and zero leaks. The 10cm center spacing gave me just enough clearance for the PEX adapters.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen