説明
A monitor sits at the wrong height in almost every office. It is either low enough that you spend the day looking down at it, or high enough that the top edge sits above eye level and your neck pays for it by Thursday. Desk stands fix the problem only if the desk is the right height, which it usually is not. An arm fixes it because the screen position stops being a function of the furniture.
The NB F80 is a single gas spring arm for screens from 17 to 30 inches, rated for 2 to 9 kg and drilled for the two VESA patterns that cover almost every monitor built in the last decade: 75 x 75 mm and 100 x 100 mm. The gas spring carries the weight, which is what allows the screen to stay where you put it instead of drifting down the desk through the afternoon. Movement is full motion in the literal sense: tilt from 85 degrees down to 30 degrees back, swivel of 180 degrees either side, and 360 degrees of rotation for portrait orientation.
Construction is aluminium alloy with steel at the load points and ABS covers, mounted either through a desk clamp or a grommet hole depending on what the desk allows. The practical effect of an arm is that it returns desk space, which is the resource most home offices actually run short of: the area under the screen becomes usable for a keyboard, a notebook, or the second monitor you were told would not fit. Cable management runs along the arm so the adjustment does not pull a cable out of the back of the machine.
The desk stays where it is. The screen goes where your eyes already are.
What Sets It Apart
-
Gas spring load compensation
Carries 2 to 9 kg so the screen holds its position through the day instead of sinking as the spring relaxes. -
17 to 30 inch fit range
Covers the size bracket that includes most office monitors, from a 17 inch secondary panel to a 30 inch primary. -
Full motion adjustment
Tilt from 85 down to 30 degrees, 180 degrees swivel each way, and 360 degrees rotation for portrait reading. -
Dual VESA patterns
75 x 75 mm and 100 x 100 mm, which is the pair of patterns that covers nearly every monitor on the market. -
Clamp or grommet mounting
Two installation routes so the arm works on a solid desktop or through an existing cable hole without extra parts. -
Aluminium alloy and steel build
Structural metal at the joints and load points, with ABS covers over the spring housing.
Technical Specifications
- ModelNB F80 / NB-F80NX
- Mount typeSingle desktop arm, gas spring
- Suggested screen size17 to 30 inches
- Load capacity2 to 9 kg
- VESA compatibility75 x 75 mm and 100 x 100 mm
- Tilt+85 to -30 degrees
- Swivel-180 to +180 degrees
- Rotation360 degrees
- MaterialAluminium alloy, steel, ABS
- InstallationDesk clamp or grommet
- Colour optionsMatte charcoal, black, white
- AdjustableFull motion with height and reach adjustment
Where It Belongs
It suits the home office that has to fit a full workstation into a corner of a room, because reclaiming the desk area under the screen is worth more than any other single change. Offices with hot-desking setups use arms so each desk can be adjusted to whoever sits down. Editing and trading desks use the portrait rotation for document and chart work. Studios with a small footprint use the single arm to lift a reference monitor out of the way when it is not needed and drop it back into view for a session.
Questions Buyers Ask Before Ordering
Q: Will it hold my monitor at a fixed height?
Yes. The gas spring is rated for 2 to 9 kg and is tension adjustable within that range, which is what allows the screen to stay where you position it rather than drifting.
Q: What if my monitor is heavier than 9 kg?
Choose a different arm. Exceeding the rated load will not damage the screen immediately, but the spring cannot hold position and the arm will sag through the day.
Q: Does it fit a 32 inch monitor?
The stated range is 17 to 30 inches. A 32 inch panel is outside the specified bracket, and the limiting factor is weight and VESA pattern as much as diagonal size.
Q: Can I rotate the screen to portrait?
Yes. Rotation is 360 degrees, so portrait orientation works for reading, coding and document review without a second mount.
Q: Do I need to drill the desk?
No. The arm installs with a desk clamp or through an existing grommet hole. Drilling is not required for either method.
Q: Does it come with the VESA plate?
The arm includes the VESA plate for both 75 x 75 mm and 100 x 100 mm patterns, which are the two standards used by nearly all monitors in this size range.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません