The Double Board | Multidiag Pro Bluetooth Diagnostic VCI

East Supplier PlatformSKU: 1005007800710472-V9.0 With BT

Color: V9.0 With BT
価格:
$101.04

税込み 送料計算済み チェックアウト時

在庫:
在庫あり

説明

A diagnostic tool is judged by what happens when the first reading disagrees with the second. The Multidiag Pro answers that question with hardware: two populated boards inside the housing, a genuine 9241A transceiver pair, and an NEC relay that switches the bus the way the factory tool does. Clones with a single board tend to lose the CAN channel on trucks, which is precisely where the cheapest units fall apart.

Coverage follows the same logic. Cars and light vans from 1988 across forty-seven marques, commercial vehicles, buses and trailers from 1995 across thirty-seven marques, plus the generic emissions package that both libraries share. The multiplexer handles two high-speed CAN channels, single-wire CAN, the K and L lines, VPW and PWM, so a 1994 diesel van and a 2023 fleet truck are approached the same way: select the brand, read the modules, work the fault.

The Bluetooth link is what makes it practical on a workshop floor. Pair the VCI to a laptop or a Windows tablet, walk to the rear of the vehicle, and keep reading live data while someone works the pedals. Software versions 2021.11 and 2020.23 ship with the keygen, activation takes a minute, and the installation runs on anything from Windows XP to Windows 11 in 32-bit form.

One board reads codes. Two boards read the vehicle.

The parts that decide the outcome

  • ✦ Double PCB V3.0 layout with real 9241A chips on both sides
  • ✦ NEC relay switching instead of a solid-state approximation
  • ✦ Car library covering 47 marques from 1988, truck library covering 37 from 1995
  • ✦ Bluetooth pairing for cable-free live data sessions
  • ✦ Twenty-four interface languages including Asia-Pacific and Eastern European sets
  • ✦ Self-activation keygen, no server call and no annual fee
  • ✦ Two year warranty with spare boards available

Specification sheet

  • Product: Multidiag Pro / TCS Pro VCI, V9.0 firmware
  • Board: double PCB, hardware V3.0
  • Transceiver: 2 x real 9241A
  • Switching: NEC relay
  • Channels: 2 x HS-CAN, SW-CAN, K/L line, VPW, PWM
  • Car coverage: 47 brands, 1988 onward
  • Truck coverage: 37 brands, 1995 onward
  • Connection: Bluetooth and USB
  • Software: 2021.11 or 2020.23 with keygen
  • Operating system: Windows XP, 7 32-bit, 10, 11
  • Languages: 24, including Arabic, Japanese, Korean, Thai, Turkish
  • Warranty: 2 years

Who this suits

Mobile technicians who cover both private cars and light commercial work get the widest single purchase from this configuration, because the truck library removes the need for a second tool and a second laptop install. Fleet maintainers use it to read body and chassis modules that basic OBD readers cannot reach. Second-hand dealers use the Bluetooth mode during test drives, leaving the VCI plugged in while the buyer is behind the wheel. If your work is confined to one marque and one platform, a brand-specific interface is cheaper. If the vehicles change every week, this is the one that keeps up.

Practical questions

Q: Does it need internet activation?

A: No. Activation runs locally through the supplied keygen, and the tool keeps working without a connection.

Q: Will it read my truck as well as my car?

A: Yes. Load the CARS package for vehicles from 1988 and the TRUCKS package for commercial vehicles, buses and trailers from 1995. Both are included.

Q: How do I know the boards are genuine?

A: Open the housing. You should see two populated boards and two 9241A transceivers with an NEC relay between them. Single-board units with a substituted chip will not hold the CAN channel on heavy vehicles.

Q: Does Bluetooth work with a phone?

A: The software is Windows-only, so the Bluetooth link pairs to a laptop or Windows tablet rather than a phone.

Q: What happens if a board fails?

A: The two year warranty covers it, and replacement boards are stocked separately so you are not forced to buy a whole new unit.

Q: Can I install it on more than one laptop?

A: Yes, with the keygen activating each installation locally. Keep a copy of the installer before the media goes into a drawer.

Q: Which software versions are on the disc?

A: 2021.11 with keygen, and 2020.23 where the older library is needed for pre-2000 vehicles. Both install side by side.

Q: Does it read body and chassis modules, or only the engine?

A: Engine, transmission, ABS, airbag, body control and instrument clusters are all reachable through the brand-specific menus. Generic OBD2 mode is also available for emissions work.

Q: How much laptop power does it need?

A: Very little. A ten year old Windows machine runs the software comfortably, which is why so many workshops keep one dedicated diagnostic laptop instead of using the main office machine.

Q: Will the Bluetooth pairing survive a reboot?

A: It stays paired to the same machine, but the vehicle profile is selected fresh each session. The VCI remembers the link, not the car.

Q: Can I print or export a diagnostic report?

A: The software saves session logs and prints fault reports, which is what most workshops hand to the customer alongside the invoice.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Rhiannon G.
Setup takes a few minutes

Activation with the keygen is straightforward once you follow the sheet. Bluetooth to the tablet works fine, though I keep the cable in the case for long sessions.

H
Harvey P.
Two boards is not marketing talk

Opened it to check before trusting it. Two populated boards, two 9241A chips and a proper NEC relay in the middle. It behaves like the workshop tool it is copying.

J
Jorah J.
Held the CAN channel on a Sprinter

This is the part that matters to me. A single board unit I tried before would drop comms on a 2019 Sprinter halfway through a scan. This one stayed on the whole session, twice.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen