The Level Ride | 4-Pack 2500lb Air Suspension Spring Bags, 1/2" NPT Single Port

20%セーブ
East Supplier PlatformSKU: 1005007594338675-United States

価格:
$348.58 $435.73

税込み 送料計算済み チェックアウト時

在庫:
在庫あり (112個), 出荷準備完了

説明

A truck bed that squats under load is a daily reminder that the springs are tired. The Level Ride restores the stance — a set of four 2500 lb air suspension spring bags that bolt into your existing coil spring setup and inflate on demand to level the ride, protect the suspension, and settle the handling.

Each bag is constructed from multi-layer reinforced rubber with steel end caps, rated for 2500 lb per bag with a 1/2 inch NPT single port for standard air fittings. Because the bags mount inside the coil springs, the installation keeps the factory ride height when deflated and gains load capacity the moment you add air. Adjust pressure with a handheld pump or a full on-board compressor system.

The result is a vehicle that tows, hauls, and carries with composure: no sagging headlights, no bottomed-out bumps, no white-knuckle lane changes under load. When the weekend gear comes out, the bags let the air out and the truck returns to its everyday self.

The load is not the problem. The sag is.


Key Features

  • ✦ 2500 lb load rating per bag for serious towing and hauling capacity
  • ✦ 1/2 inch NPT single port fits standard air fittings and accessories
  • ✦ Multi-layer reinforced rubber construction with steel end caps
  • ✦ Bolt-in coil spring design preserves factory ride height when deflated
  • ✦ Adjustable air pressure for load-specific leveling
  • ✦ Compatible with handheld pumps or on-board compressor systems
  • ✦ Reduces sag, bottoming out, and sway under heavy loads
  • ✦ Simple bolt-on installation with included mounting hardware

Technical Specifications

  • Load Rating: 2500 lb per bag
  • Port: 1/2 inch NPT single port
  • Construction: Multi-layer reinforced rubber with steel end caps
  • Mounting: Bolt-in coil spring application
  • Quantity: 4 bags per set
  • Air System: Compatible with standard air fittings and compressors
  • Ride: Adjustable pressure for leveling and load support
  • Application: Trucks, SUVs, and tow vehicles with coil spring suspension
  • Installation: Bolt-on with included hardware
  • Maintenance: Periodic pressure check per manufacturer guidance
  • Package: 4 spring bags with mounting hardware

Application Scenarios

Weekend haulers level the bed for furniture and building materials; boaters and RV owners stabilize the rear end on the tow home; overlanders add capacity for rooftop loads and trail gear; work trucks protect suspension components from chronic overloading; daily drivers inflate for the trip and deflate for a stock ride.

Frequently Asked Questions

Q: Will these fit my vehicle?

A: The bags are designed for coil spring suspension applications with a 1/2 inch NPT port. Verify your vehicle coil diameter and spring pocket dimensions against the product fitment notes before ordering.

Q: How do I inflate the bags?

A: Use a handheld air pump or connect the bags to an on-board compressor system through the 1/2 inch NPT port. Adjust pressure to match your load.

Q: Will they affect my ride when empty?

A: Run the bags at the recommended low pressure when unloaded so the suspension retains its factory ride characteristics.

Q: How much load can they handle?

A: Each bag is rated for 2500 lb, and the four-bag set distributes capacity across the rear axle. Always stay within your vehicle gross axle weight rating.

Q: Is installation difficult?

A: Installation is bolt-on for most coil spring applications using the included hardware. A basic tool set is required; professional installation is recommended if you are not familiar with suspension work.

Q: Do they require maintenance?

A: Check air pressure periodically and inspect the bags for wear during routine maintenance. The reinforced construction is designed for long service life.

Q: Can I use a single bag or do they come only in a set?

A: This listing is for the complete four-bag set, which is the recommended configuration for balanced axle support. Individual bags are typically used only for custom single-corner applications.

Q: What pressure should I run for light loads?

A: For light daily driving, run the bags at the recommended minimum pressure listed in the included instructions (typically 5-10 psi) to protect the rubber from pinching while keeping the ride stock.

Q: Do I need a compressor to use these bags?

A: No. The bags can be inflated with a handheld air pump through the 1/2 inch NPT port. An on-board compressor is optional and adds convenience for frequent load changes.

Q: Will they void my vehicle warranty?

A: Air spring helper bags are a common aftermarket suspension enhancement and do not modify the factory components. Check with your vehicle manufacturer or dealer for specific warranty terms.

The EastSupplier Promise

Every suspension kit is inspected before dispatch and packed with the full hardware set. We have supplied automotive professionals worldwide since 2010 with parts that fit and perform.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Sam R.
Towing confidence

With the boat behind the truck, the rear no longer squats. The 2500 lb rating per bag is real, I checked the stance loaded and empty.

V
Victor N.
Easy install, solid feel

Bolt in was straightforward with the included hardware. I run 15 psi for my tool loads and it rides better than stock. Great kit.

G
Greg W.
No more sag

Installed on my Silverado and the difference under a heavy trailer is night and day. Headlights stay level and the ride is stable at highway speed.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen