The Jet Column | 150,000 RPM Brushless Turbo Air Blower

20%セーブ
EastSupplier PlatformSKU: 1005010513544564-black

Color: black
価格:
$36.24 $45.30

税込み 送料計算済み チェックアウト時

在庫:
在庫あり (196個), 出荷準備完了

説明

Compressed air in a can is the most expensive air sold anywhere. It runs out mid-job, it spits propellant onto a sensor if you tilt it, and it costs more per use than the tool most people should have bought instead. The Jet Column is the replacement: a brushless blower rated at 150,000 RPM with five speeds, a 6,000 mAh battery and 237 grams of body weight, which puts serious airflow in a hand that is doing a delicate job.

The numbers matter in this order. RPM sets the air speed at the nozzle, five speeds let you drop from clearing a heatsink to lifting dust off a keyboard without launching it across the room, and the brushless motor is what makes the tool last beyond a season. Brushed blowers are cheap for a reason: the brushes wear, airflow drops, and the unit ends up a paperweight. The 6,000 mAh cell supports fast charging, so the tool comes back to full between jobs rather than sitting on a cable overnight, and the whole body is 237 grams, which is light enough to hold at an angle into a case for a minute at a time.

The real value shows up in places where air is the only way in. A graphics card between the fins, a camera sensor cavity, a laptop vent, the recesses of a 3D printer frame, a keyboard tray, a model kit, a sewing machine, a car air vent. Every one of those is a job where a cloth pushes dust deeper and a can of air runs out in ninety seconds. The filter on the intake is what separates this from a leaf blower in miniature: it draws clean air in, so it does not coat the thing you are cleaning with whatever was already airborne.

The cheapest way to clean a delicate thing is with air that carries nothing else.


Five Speeds, One Purpose

  • ✦ 150,000 RPM brushless motor, so airflow neither fades with use nor wears out.
  • ✦ Five speed steps that scale from sensor-safe to heatsink-clearing.
  • ✦ 6,000 mAh battery with fast charging, no disposable cans and no cord.
  • ✦ About 237 g in the hand, light enough to hold at an awkward angle.
  • ✦ Reusable by design, replacing compressed air cans over the life of the tool.
  • ✦ Intake filter keeps drawn air clean rather than recirculating dust.
  • ✦ Handheld form that reaches inside cases, ducts, vents and fin stacks.

Technical Specifications

  • Model  X50
  • Motor  Brushless, rated to 150,000 RPM
  • Speed Settings  5 steps
  • Battery  6,000 mAh, fast charging
  • Battery Included  Yes
  • Weight  About 237 g
  • Function  Air blower and dust cleaner
  • Intake  Filtered
  • Operation  Long press for three seconds to power on, remove the intake plug before first use
  • Use  Dry dust removal only

Where 150,000 RPM Is the Right Tool

PC builders and repair benches use it before every rebuild, because thermal paste dust in a fin stack is the difference between a card that throttles and one that does not. Photographers clean sensor cavities and lens barrels where a cloth is not an option. 3D printing owners clear filament dust and stringing out of a print bed frame, and laser cutter operators blow debris out of a honeycomb bed. Mechanics use it on brake caliper recesses and airbox corners, and hobbyists use it on models, miniatures and keyboards. It is also the practical answer for anyone who keeps buying canned air: one charge replaces a case of cans, and the flow does not drop as the can empties.

Ownership Questions

Q. Will this damage electronics?

Air alone does not damage a board, but a spinning fan can. Hold the fan blades still with a finger or a soft probe before blowing into a heatsink, because the blower can spin a bearing past its rating.

Q. How loud is it?

Loud at full speed, which is what 150,000 RPM sounds like in a small housing. The five speed steps exist precisely so that delicate jobs run at a lower setting where the noise is unremarkable.

Q. Does it need to be plugged in?

No. The battery is built in and charged over the supplied cable. That is the entire reason it replaces canned air, which cannot go where there is no socket and does not hold a charge either.

Q. Why does it not power on straight out of the box?

There is a shipping plug in the intake and the power button uses a long press of about three seconds. Both are deliberate: the plug protects the motor in transit and the long press prevents accidental starts in a bag.

Q. Can it clean a camera sensor?

It is safe for the cavity around the sensor and the mirror box of a DSLR. For the sensor surface itself, use a dedicated blower with a narrow nozzle and no brush, and never touch the glass.

Q. Is 237 grams light enough for long use?

It is light for a blower of this output, and still a two-handed tool if you are holding it at an angle for more than a minute. That is why the body is shaped like a cylinder rather than a pistol.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
O
Orla M.
Loud on maximum, which is fair enough

Full speed is genuinely loud, but I only use it on heatsinks. On the middle settings it is quieter than a hairdryer and does the job on a 3D printer frame.

N
Niels I.
Long press to start caught me out

Read the note about the shipping plug and the three second press, so no drama. 237 grams feels light for the airflow it produces and the intake filter keeps it from blowing dust back in.

M
Maeve Q.
Replaced a case of compressed air cans

Cleared two graphics cards and a laptop vent on one charge. The five steps matter, low speed is gentle enough for a keyboard, high speed shifts dust out of a fin stack.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen