説明
Washing a Print Should Not Require a Solvent Cabinet.
Most of the friction in resin printing is not in the printer. It is in the alcohol, the ventilation, the gloves and the disposal. Water-Wash Resin 2.0 removes that entire step: hydrophilic materials let you rinse residual resin under running water, which makes post-processing quieter, cheaper, cleaner and considerably easier to do indoors without a dedicated solvent station.
The trade-off with early water-washable formulas was brittleness, and that is where this generation earns its place. A measured elongation rate of 16.62% gives cured parts genuine toughness, so detailed models resist cracking instead of shattering at the first knock. The formula is optimised for low odour and low viscosity, which means it flows and drains cleanly from fine features and keeps the workspace breathable, and it is engineered against the yellowing that dulls clear and light-coloured prints over time.
Each order is a 3-kilogram supply, supplied in White, Gray, HD Gray, Black or Clear, and formulated for 405 nm LCD and DLP printers.
Detail is where you put it. This is what keeps it there after the wash.
Key Features
- ✦ Water-washable: rinse with water, no alcohol bath required
- ✦ 16.62% elongation for tough, crack-resistant cured parts
- ✦ Low odour, low viscosity formula for cleaner post-processing
- ✦ Anti-yellowing chemistry that holds colour and clarity
- ✦ High precision reproduction of fine features
- ✦ Formulated for 405 nm LCD and DLP resin printers
- ✦ Available in White, Gray, HD Gray, Black and Clear; 3 kg supply
Technical Specifications
- Brand: ANYCUBIC
- Material: Water-Wash Resin 2.0
- Form: Liquid photopolymer
- Wavelength: 405 nm (LCD / DLP)
- Elongation at Break: 16.62%
- Odour: Low
- Viscosity: Low
- Yellowing: Anti-yellowing formula
- Precision: High-precision detail reproduction
- Colours: White, Gray, HD Gray, Black, Clear
- Supply: 3 kg per order
- Post-Processing: Water rinse, then standard UV curing
Where It Belongs
The Clear Draft is for the workbench that has already run out of patience for an alcohol bath. Miniature painters and tabletop modellers use it for figures where fine detail has to survive handling. Jewellery and prototype studios use the Clear and White grades for display parts where yellowing is unacceptable. Engineers and product teams use the HD Gray for dimensionally critical housings, jigs and snap-fit prototypes that need toughness rather than brittleness. And anyone printing in a spare room, a classroom or a shared studio values it most for the plain fact that the rinse water goes down the sink instead of into a solvent disposal problem.
Frequently Asked Questions
Q: Do I really not need isopropyl alcohol to clean prints?
Correct. The formula is water-washable, so residual resin rinses away under running water. You still cure the print under UV as normal, but the washing stage no longer requires a solvent bath.
Q: Is water-washable resin more brittle than standard resin?
That was true of the first generation. This formulation reaches 16.62% elongation at break, which gives cured parts real toughness and makes them considerably less prone to cracking than early water-washable resins.
Q: Which printers is it compatible with?
It is formulated for 405 nm LCD and DLP resin printers, which covers the great majority of desktop machines, including the ANYCUBIC range.
Q: Will clear and white prints yellow over time?
The formula is engineered to be anti-yellowing, which is specifically what keeps clear and light-coloured prints from dulling as they age.
Q: How much resin do I get?
Each order supplies 3 kg. You can select White, Gray, HD Gray, Black or Clear depending on whether you are chasing toughness, surface finish or translucency.
Q: Does low odour mean low performance?
No. The reduced odour comes from the optimised water-washable formula itself, not from diluting performance. It retains high precision and the mechanical toughness described above.
Q: What colours can I order?
The resin is supplied in White, Gray, HD Gray, Black and Clear. White and Clear suit display and translucent parts, HD Gray suits dimensional work where fine detail must read clearly, and Black is useful where surface finish and light control matter.
Q: How should the resin be stored?
Keep the bottle sealed, out of direct sunlight and within a comfortable room temperature range. Water-washable formulas are sensitive to prolonged UV exposure and heat, so a cool, dark shelf is the correct home for an opened bottle.
Q: Will I need to change my exposure settings?
Water-washable resins can call for a slightly different exposure time than standard resins, so it is worth running a small test print first and adjusting from there. Once dialled in, the formula prints consistently across a batch.
Q: Is 3 kg enough to work with?
3 kg is a working quantity rather than a sample. It is enough to complete a substantial run of models or several rounds of prototypes before you need to reorder, which is why it is supplied as a single 3 kg unit rather than a small trial bottle.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません