The Carvewright | Chrome Vanadium Semi-Circular Wood Carving Chisel

20%セーブ
East Supplier PlatformSKU: 2255800088589989-12mm Blade Width

価格:
$29.10 $36.38

税込み 送料計算済み チェックアウト時

在庫:
残り15個

説明

The gouge is the oldest argument between a hand and a piece of wood. This one ends with the wood losing gracefully.

The Carvewright is a semi-circular gouge forged from chrome vanadium steel, hardened to HRC 58-62 — the range where edges hold through a full afternoon of carving and still answer to a strop at the end of it. It cuts basswood, walnut, and oak with the same quiet authority, opening curves that flat chisels can only approximate.

The blade is ground in a classic U-sweep from 8mm to 25mm across the set, so the same tool family moves from fine detail work to deep material removal. Each one comes mounted in an ergonomic round handle, its grip shaped for long sessions and finished with reinforced steel hoops at the tail — the detail that keeps the handle from splitting when the mallet comes down.

This is not a decoration for the workshop wall. It is a working instrument for relief carving, sculpture, spoon making, and the kind of woodcut craft that demands the tool disappear and leave only the form. Chrome vanadium steel resists rust between sessions, and the edge geometry is simple to maintain.

The wood does not know what it is yet. You do.


Key Features

  • ✦ Chrome vanadium steel blade — high hardness, long edge retention
  • ✦ HRC 58-62 hardness — carves hardwoods without constant re-sharpening
  • ✦ Semi-circular (gouge) profile — opens smooth concave cuts
  • ✦ Blade widths 8mm to 25mm — fine detail to heavy removal
  • ✦ Ergonomically designed round handle — comfortable long sessions
  • ✦ Reinforced steel hoop at the tail — mallet-proof construction
  • ✦ Total length 280-310mm — proper leverage and control

Technical Specifications

  • Material: Chrome vanadium steel blade
  • Hardness: HRC 58-62
  • Type: Semi-circular carving gouge
  • Blade Width: 8mm (5/16'') / 12mm (1/2'') / 18mm (3/4'') / 25mm (1'')
  • Total Length: 280-310mm
  • Handle Width: 30mm
  • Handle Shape: Round, with steel tail hoop
  • Use: Wood carving, sculpture, relief, spoon making
  • Quantity: 1pc per order
  • Care: Wipe clean, oil lightly, strop to maintain edge

Where It Belongs

The Carvewright earns its place in any serious carving bench — relief panels, sculptural figures, wooden spoons, decorative moldings, and restoration work. It pairs with a carving mallet for deep cuts and works freehand for detail. From weekend whittling to professional woodcut craft, this gouge carries the conversation.

Frequently Asked Questions

Q: Is the blade sharp out of the box?

A: Yes — the edge is ground and honed before shipping. A quick strop before your first session optimizes it further.

Q: What woods can it carve?

A: It handles softwoods and hardwoods alike — basswood, pine, walnut, and oak. Higher-hardness steel means fewer interruptions for sharpening.

Q: How do I maintain the edge?

A: Strop regularly during sessions, and re-hone with fine stones when the edge slows. Chrome vanadium steel takes a clean edge easily.

Q: Which width should I start with?

A: For general relief work, the 12mm and 18mm gouges are the workhorses; use the 8mm for detail and the 25mm for deep material removal.

Q: Can it be used with a mallet?

A: Yes — the reinforced steel hoop at the handle tail protects the handle from mallet strikes, making it safe for heavier cuts.

Q: Will it rust?

A: Chrome vanadium steel resists corrosion far better than carbon steel, but wiping it clean and applying a light oil coat after use is still recommended.

Q: Does it come with a sharpening guide?

A: The chisel ships ready to carve with a factory-ground edge. For maintenance, a basic strop and honing compound are all you need — no complex jigs required.

Q: Can I use it on green (fresh) wood?

A: Yes — it carves both green and seasoned wood well. On green wood, wipe the blade dry after use to keep the edge and handle in top condition.

Q: What is the edge angle?

A: The gouge is ground with a standard carving geometry that suits both push cuts and mallet work — easy to maintain with a flat strop.

Q: Does the handle fit smaller hands?

A: The round 30mm handle suits most hand sizes; for fine detail work you can choke up closer to the blade for precision control.

The EastSupplier Promise

  • ✦ Every unit is inspected before dispatch — we ship what we would use ourselves.
  • ✦ Reliable international delivery with tracking on every order, from our warehouses to your door.
  • ✦ Responsive support from real people — message us before you buy with any question, or after with any issue.
  • ✦ Straightforward returns: if the product is not right for you, we make it right — no arguments, no runaround.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Arthur M.
Cuts clean curves in walnut

Used it on walnut and oak — the semi-circular profile opens smooth concave cuts with minimal tear-out. Sharp out of the box and easy to maintain.

F
Felix N.
Comfortable handle, solid steel

The round handle sits well in the hand for long sessions and the steel hoop at the tail gives confidence when the mallet comes down. Good gouge for the price.

H
Henry B.
Edge holds through long sessions

I carved a full relief panel over two evenings and only needed a quick strop at the end. The chrome vanadium steel is the real deal at HRC 58-62.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen