説明
A power bank is a promise that runs out. A panel is a promise that renews itself. The Pocket Sun exists for the second kind of promise: a thirty-watt monocrystalline panel sealed in epoxy resin, thin enough at six millimetres to slide down the back of a rucksack, with a standard USB output that asks nothing of the device at the other end of the cable.
The construction is deliberately unglamorous. Monocrystalline cells are laminated under an epoxy resin surface rather than behind glass, which keeps the weight down and makes the panel tolerant of the handling a trail actually imposes. The frame measures 30 by 14 by 2.5 centimetres, so it stands or leans without a mounting kit, and the surface is sealed against rain and spray. There is no logic board to fail, no proprietary connector to lose, and no firmware to update. It is a piece of silicon, some copper, and a USB socket.
Physics deserves an honest sentence here. A panel is not a generator; it is a converter, and it converts in proportion to the light it receives. In full, unobstructed sun the cells deliver 6.8 volts at 1.2 amps through the USB output, which is enough to push meaningful current into a phone, a headlamp or a power bank. In shade, or behind the mesh of a tent fly, output falls away, and no marketing claim changes that. Treat it as a daylight device, keep hard objects off the face of the cells, and do not subject it to bending loads, and it will keep doing the one thing a battery cannot do indefinitely.
The sun does not send an invoice. That is the entire argument.
Key Features
- ✦ Monocrystalline silicon cells sealed under epoxy resin
- ✦ 30 W peak rating, 6.8 V / 1.2 A through a standard USB output
- ✦ Six-millimetre panel thickness with a stand-capable frame
- ✦ Weather-sealed surface for rain, spray and trail use
- ✦ 30 x 14 x 2.5 cm footprint that fits a rucksack lid or a pannier
- ✦ No controller, no proprietary connector, no firmware to maintain
- ✦ Works with phones, power banks, headlamps, cameras and USB accessories
Technical Specifications
- Cell material: Monocrystalline silicon with epoxy resin surface sealing
- Rated power: 6 W continuous
- Maximum power: 30 W peak rating
- Solar output: 6.8 V, 1.2 A
- Output interface: Standard USB
- Dimensions: 30 x 14 x 2.5 cm
- Panel thickness: 6 mm
- Colour: Black
- Certification: CE
- Construction: Lightweight frame design
- Package: 1 x solar panel charger
Where It Belongs
The Pocket Sun belongs to people who go somewhere the grid does not follow. Multi-day hikers and bikepackers strap it to the top of a pack and let it trickle charge a power bank through the walking day. Campers use it to keep headlamps, speakers and phones alive across a long weekend. Van dwellers and overlanders lean it against a windscreen to top up navigation devices without touching the starter battery. Anglers and hunters carry it for a radio and a torch. It also earns its place in a home emergency kit, where a panel in the window keeps one phone working through an outage that has taken the wall sockets down. Anywhere a small battery needs to recover by daylight, this is the quiet, maintenance-free way to do it.
Frequently Asked Questions
Q: What can this panel actually charge?
Phones, power banks, headlamps, action cameras, e-readers and similar USB devices. In direct sun the 6.8 V / 1.2 A output is sufficient to charge a phone or top up a power bank over the course of a day.
Q: Does it work in cloudy weather?
It produces current, but less of it. A panel converts light rather than manufacturing it, so output scales with irradiance. Overcast days will slow charging considerably; full sun is where the rated output lives.
Q: Why does the listing show both 6 W and 30 W?
The 6 W figure is the continuous rated power. The 30 W figure is the peak rating used by the manufacturer. Plan real-world expectations around the rated output and treat the peak number as a ceiling rather than an average.
Q: Is it waterproof?
The cells are sealed under an epoxy resin surface that sheds rain and spray. It is built for outdoor use, but it should not be submerged, and it must not be brought into contact with corrosive materials.
Q: Can I bend it to fit a curved surface?
No. The panel must not be subjected to bending forces during transport or assembly. Mount it flat or lean it against a rigid support.
Q: Do I need a charge controller?
Not for direct USB charging of devices. The output is a standard USB socket intended for phones and power banks rather than for charging a battery bank directly.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません