説明
A pneumatic system is an exercise in trust. You trust the compressor to build pressure. You trust the lines to hold it. And you trust the valves to open and close with the precision of a metronome, because when a solenoid valve sticks, the cylinder does not fire, the clamp does not release, and the assembly line earns an unscheduled pause. The Pneumatic Gate is the component that earns that trust, one cycle at a time.
This 2-position, 2-port normally-closed solenoid valve operates on 12V DC, 24V DC, or 220V AC — one of the widest voltage compatibility ranges in its class. The normally-closed configuration means the valve stays shut when de-energized, a fail-safe that prevents unintended cylinder movement during power loss. The 6mm and 8mm hose barb connections accept standard pneumatic tubing without adapters or reducers, and the brass body dissipates heat efficiently during continuous-duty cycles.
In a factory where a single valve cycles 40 times per minute for eight hours a day, the difference between a valve rated for 5 million cycles and one rated for 500,000 is the difference between replacing it once a year and replacing it once a month. The Pneumatic Gate sits on the right side of that equation. The coil is epoxy-encapsulated against moisture and dust, and the spool is hardened stainless steel — not the chrome-plated mild steel that pits and seizes after six months of humidity.
Air does not wait. Neither should your valves.
Key Features
- ✦ Triple-voltage compatible: 12V DC, 24V DC, and 220V AC — one valve for multiple system voltages
- ✦ Normally-closed configuration provides fail-safe operation during power loss
- ✦ Dual hose barb sizes: 6mm and 8mm ports accept standard pneumatic tubing without adapters
- ✦ Epoxy-encapsulated coil resists moisture, dust, and vibration in industrial environments
- ✦ Hardened stainless steel spool — outperforms chrome-plated alternatives in humid conditions
- ✦ Rated for continuous-duty cycles at up to 40 actuations per minute
- ✦ Brass body provides efficient heat dissipation during extended operation
Technical Specifications
- Type: 2-position, 2-port (2/2-way) direct-acting solenoid valve
- Default State: Normally closed (NC) — opens when energized
- Voltage Options: 12V DC / 24V DC / 220V AC (select at purchase)
- Port Size: 6mm and 8mm hose barb connections (push-to-connect compatible)
- Body Material: Brass with nickel plating
- Spool Material: Hardened stainless steel
- Operating Pressure: 0-1.0 MPa (0-145 PSI)
- Response Time: <20ms actuation
- Media: Compressed air, inert gases — do NOT use with water or corrosive fluids
- Cycle Life: Rated for 5 million+ cycles under standard operating conditions
Application Scenarios
The Pneumatic Gate serves four core industrial contexts. Automated assembly lines use it to control pneumatic cylinders for part ejection, clamping, and conveyor gating — the normally-closed default prevents cylinders from firing unexpectedly during power cycling. CNC and machining setups use it as the air blast valve for chip clearing on router tables and milling stations. Agricultural automation systems (irrigation gate controls, greenhouse vent actuators) benefit from the broad voltage compatibility when retrofitting older 220V infrastructure. And laboratory and medical device manufacturers use the clean, oil-free actuation for environments where lubricated valves would contaminate the workspace. In each case, the valve disappears into the system — and that is the point. The best pneumatic component is the one you never think about until the maintenance schedule reminds you it is due for inspection.
Frequently Asked Questions
Q: Can this valve be used with water or hydraulic fluid?
A: No. This is a pneumatic valve rated for compressed air and inert gases only. Water and hydraulic fluids will corrode the internal spool and degrade the epoxy coil encapsulation. For liquid applications, use a valve specifically rated for the media type.
Q: What is the difference between normally-closed and normally-open?
A: Normally-closed (NC) means the valve blocks air flow when de-energized and opens only when power is applied. This is the safer default for most industrial applications because a power loss stops the system rather than causing unintended cylinder movement. Normally-open (NO) is the opposite — air flows when power is off, and energizing the coil closes the valve.
Q: How do I select the correct voltage for my system?
A: Match the valve voltage to your existing control system. 12V DC is common in automotive and small-scale automation. 24V DC is the industrial standard for PLC-controlled systems. 220V AC is used for direct mains-powered setups without a DC power supply. Choose at purchase — the coil is voltage-specific and not interchangeable.
Q: Will the coil overheat during continuous operation?
A: The epoxy-encapsulated coil is rated for 100% duty cycle — it can remain energized indefinitely without overheating, provided ambient temperature stays below 55°C (131°F). In high-temperature environments, consider adding a cooling interval or selecting a higher-rated industrial valve.
Q: Does it require lubrication?
A: The stainless steel spool operates dry and does not require oil lubrication. Do NOT inject oil into the air supply line upstream of the valve — this can cause the spool to gum up over extended cycles. Use a dry, filtered compressed air supply for optimal longevity.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません