The Octavia Duct | Rear Air Conditioning Outlet for Skoda Octavia 1999-2015

EastSupplier PlatformSKU: 32849782721-Front right

価格:
$57.09

税込み 送料計算済み チェックアウト時

在庫:
在庫あり (2937個), 出荷準備完了

説明

A fifteen year old car does not fail because the engine wears out. It fails because the small plastic parts around the engine go brittle, crack, and are no longer worth stocking at a dealership. The rear air vent on a first generation Octavia is a perfect example: a handful of clips and a plastic shell that takes every cycle of hot and cold the cabin can produce, and which snaps at the mounting tabs long before the climate system itself gives trouble.

This is the direct replacement for OE part number 1ZD 819 203, also written 1ZD819203, the center rear air conditioning outlet for the Skoda Octavia from nineteen ninety nine to two thousand fifteen. The shell is molded in black ABS with the original mounting geometry, so the vent louvres sit flush with the console and the thumbwheel adjusts airflow the way the factory part did. No adapters, no trimming, no glue: it clips into the existing aperture.

Fitment detail is where most aftermarket plastics fail. The unit measures approximately fifteen by thirteen by ten centimeters and weighs four hundred grams, matching the original part closely enough that the console trim closes over it without a gap. Because the molding is new rather than a salvaged original, the clips have full material thickness and the louvre pivots are not worn oval, which is the actual failure mode on a twenty year old part pulled from a breaker's yard.

Installation is a trim job, not a mechanical one. Release the rear console panel, unclip the old outlet, transfer nothing, and press the new unit into place until the tabs seat. Fifteen minutes with a plastic pry tool on most cars, longer if the console has never been opened. It is the kind of repair that restores a surprising amount of perceived quality to an older cabin for very little money.

The climate system was never broken. The plastic around it was.


What the replacement gets right

  • ✦ OE interchange 1ZD 819 203 / 1ZD819203 - the center rear air conditioning outlet for the Octavia, not a universal vent.
  • ✦ Direct fit for 1999-2015 Octavia across the model run, using the original aperture and mounting tabs.
  • ✦ New molding, not salvage - full-thickness clips and unworn louvre pivots, which is exactly what a used part cannot offer.
  • ✦ Black ABS shell matching the factory console finish, with a working thumbwheel for airflow control.
  • ✦ 15 x 13 x 10 cm, 0.4 kg - dimensionally close to the original so the console trim closes without a gap.
  • ✦ No drilling or adhesive: the unit clips into the existing opening with a plastic pry tool.

Technical Specifications

  • OE reference  1ZD 819 203 / 1ZD819203
  • Part type  Rear air conditioning outlet, center console
  • Vehicle fitment  Skoda Octavia 1999-2015
  • Material  ABS plastic
  • Color  Black
  • Dimensions  15 cm x 13 cm x 10 cm
  • Weight  0.4 kg
  • Condition  New
  • Installation  Clip-in replacement, no drilling
  • Certification  ISO 9001 manufacturing
  • Package contents  1 x rear air vent

Who actually buys this part

Owners keeping a Mk1 Octavia on the road, independent workshops doing a cheap cabin refresh before resale, and detailers who cannot present a car with a cracked vent in the back console. The part also sells to buyers replacing a vent that a previous owner removed for a phone holder installation and never refitted, which is more common than the model's age would suggest.

Questions buyers ask before ordering a vent

Q. How do I confirm this is the right part for my car?

Check the OE number molded on the back of your existing vent. If it reads 1ZD 819 203, this is the part. If your car is a pre-facelift or facelift Octavia outside the 1999-2015 window, message us the year and a photo of the console before ordering.

Q. Is this genuine Skoda plastic?

No. It is a new aftermarket molding built to the OE specification and part number, manufactured under ISO 9001. It is not a dealership part, and it is priced accordingly, which is the entire reason this listing exists for a car this age.

Q. Will the color match my interior?

The shell is molded in black to match the standard Octavia console. If your interior is beige or gray, this part will read as a contrast piece; the original beige variants are a different part number and are not covered by this listing.

Q. How long does installation take?

Plan on fifteen to twenty five minutes. Release the rear console trim with a plastic pry tool, unclip the old outlet from its tabs, and press the new one in until it seats. Do not use a metal screwdriver on the trim.

Q. Does the airflow thumbwheel work?

Yes, the louvre and thumbwheel are functional, not a blanking plate. The vent opens and closes and directs airflow the same way the factory unit does.

Q. What if a mounting tab arrives broken?

Photograph the damage and the packaging within seven days. Transit damage is replaced without argument; the tabs are the part's weak point, so pack the old unit away rather than tossing it until you have confirmed the new one seats cleanly.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
F
Fenwick F.
Fifteen minutes with a pry tool

Rear console panel off, old vent out, new one in. Louvres move freely and it does not rattle over rough roads.

Y
Yelena L.
Correct part, colour is a true black

Matched the OE number 1ZD 819 203 before ordering. Only note is that the black is slightly glossier than the twenty year old plastic next to it, which will fade in time.

B
Bramwell B.
Clips in like the original

Mk1 Octavia, the old vent had both mounting tabs snapped. This one seated on the first try and the console trim closes flush. Airflow thumbwheel works properly.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen