The Tailored Line | Gloss Black AMG-Style Trunk Spoiler for Mercedes C-Class W205

20%セーブ
East Supplier PlatformSKU: 1005007185414271-glossly black-United States

Color: glossly black
価格:
$133.72 $167.15

送料計算済み チェックアウト時

在庫:
在庫あり

説明

The rear deck of a W205 saloon is a long, flat surface, and long flat surfaces look unfinished at speed. The Tailored Line is a 131 cm trunk lip spoiler in gloss black ABS that closes that line without turning a four-door saloon into something it is not. It follows the C63 and C43 profile, which means the height is set by the boot geometry rather than by a universal wing template.

The material choice is the whole argument. ABS is a thermoplastic with enough flex to survive the slight twist a boot lid sees in daily use, and enough rigidity that the part does not flap at motorway speed. At 1390 g the spoiler is light enough for the existing boot struts to cope with, which is the difference between a bolt-on part and one that changes how the lid closes. The gloss black is painted rather than raw plastic, so it does not fade to grey chalk within two summers.

Fitment is by automotive adhesive along the contact face, with no drilling on this style. The contact edge is shaped to sit flush against the boot lid, and 0.5 to 1 inch of dimensional tolerance is normal for a hand-measured part, so dry-fit first and check the gaps at both corners before you peel the tape backing. The part suits the four-door W205 saloon from 2015 to 2019, and the listing states that plainly because a coupe or estate has a different boot lid.

It is a fifteen millimeter change in silhouette that makes the rear end look drawn rather than assembled.


What the Part Actually Changes

  • ✦ One hundred and thirty-one centimeters of lip, matched to the W205 saloon boot width rather than a universal length.
  • ✦ Gloss black paint over ABS, so the surface holds a finish instead of chalking in UV.
  • ✦ AMG-style C63 and C43 profile for owners who want the line, not the wing.
  • ✦ Adhesive fitment on the contact face, so the boot lid is not drilled and the change is reversible.
  • ✦ 1390 g total weight, light enough that the boot struts behave as they did before.
  • ✦ Shaped contact edge that sits flush along the deck, with the corners relieved to avoid lifting.
  • ✦ Supplied as a single painted part, ready for dry-fit and tape-pull installation.

Technical Specifications

  • Part  Rear trunk lip spoiler
  • Style  AMG C63 and C43 profile
  • Material  ABS thermoplastic
  • Finish  Gloss black, painted
  • Length  131 cm
  • Width  26 cm
  • Height  7 cm
  • Weight  1390 g
  • Fitment  Mercedes-Benz C-Class W205 four-door saloon, 2015 to 2019
  • Installation  Automotive adhesive, no drilling on this style
  • Quantity  One spoiler per order

Who Buys a Lip Spoiler Rather Than a Wing

The typical buyer has a standard W205 saloon, often an AMG-line car with the sport bumpers already fitted, and wants the rear end to look resolved without an aftermarket wing that reads as track hardware. Detailers and small body shops order them for customer cars where the brief is a subtle OEM-plus look. A second group is owners preparing a car for sale, since the gloss black lip photographs well and can be removed without leaving holes. Occasional track-day drivers fit them for the small high-speed stability gain, though the honest reason for most orders is visual balance rather than lap times.

Fitment Questions Worth Reading First

Q. Will this fit a W205 coupe or estate?

No. The part is shaped for the four-door saloon boot lid between 2015 and 2019. Coupe, cabriolet and estate bodies have a different rear deck and a different curve, so the spoiler will not sit flush.

Q. Do I have to drill the boot lid?

This style mounts on automotive adhesive, so no drilling is required. That also means surface preparation matters more than the adhesive itself: clean, degreased and above roughly 15 degrees Celsius, or the tape will lift at a corner.

Q. Is the paint a match for factory obsidian black?

It is a gloss black painted finish, not a factory color code. It reads as black on the car and photographs correctly, but a paint-match purist should have it refinished locally rather than expecting an exact OEM shade.

Q. How long does installation take?

A careful dry-fit and tape-pull is thirty to forty five minutes. Professional fitting is recommended, and the money is spent on alignment rather than on labour, because a spoiler set two millimeters off shows at every corner.

Q. Will it affect the boot opening or the struts?

No. At 1390 g the additional load is within what the existing struts handle, and the part sits on the deck rather than over the shut line.

Q. What is the realistic size tolerance?

Hand measurement carries roughly half an inch to an inch of variance. Dry-fit the part before removing the adhesive backing, and compare both corners against the boot line at the same time.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
F
Florian Z.
Makes the rear end look drawn rather than added

It is a small change in silhouette and the biggest visual improvement I have made to the car. No drilling, so it comes off if I ever sell it.

E
Evanthe H.
Gloss black holds up, one corner needed heat

A corner lifted in cold weather on the first attempt. Warmed the tape with a hairdryer, pressed for a full minute, and it has stayed down since.

C
Clemence X.
Fitment was right on a 2017 saloon

Dry fitted it before pulling the tape and the corners sat level on both sides. One careful pair of hands is enough if you mark the centre line first.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen