The Long-Range Eye | R200 UHF RFID Reader Module, 2M Range (TTL UART + USB, 860-960MHz)

20%セーブ
East Supplier PlatformSKU: 4000281733851-10-100cm cable

Color: 10-100cm cable
価格:
$12 $15

送料計算済み チェックアウト時

在庫:
在庫あり (660個), 出荷準備完了

説明

Most hobbyist RFID modules ask you to press a tag flat against the antenna. That is not reading; that is tapping. The R200 module reads at up to two metres with a suitable antenna, which turns identification into something a person can walk past. For inventory tracking, access control prototypes, and asset tagging, that distance is the difference between a demo and a system.

The chip at the centre is the reason it works. The R200 UHF chipset is the workhorse of the RFID industry, proven in commercial production readers worldwide. This module brings that silicon to the workbench with both TTL UART and USB interfaces, so you can prototype from a laptop on day one and integrate into an embedded board on day thirty without changing hardware.

The included firmware speaks the standard R200 command set. That means code written during evaluation ports to a production board with minimal change. You design once and deploy across the whole product line, rather than rewriting the low-level layer every time the form factor shifts. For a maker building a smart shelf, a tool-tracking cabinet, or an automated inventory counter, that stability is worth more than a lower headline price.

The module operates across the full 860 to 960MHz UHF band, covering the global frequency allocations used by most commercial tag systems. It follows EPC Gen2 and ISO18000-6C, the two protocols that almost every passive UHF tag on the market complies with. Pair it with an external antenna in the 0 to 12dBi range, and the read distance scales with the antenna you choose.

Two metres is not a specification. It is the moment a tag stops being a chore.

Key Features

  • R200 UHF chipset, the same silicon family used in commercial production readers
  • Read range up to 2 metres with a suitable external antenna
  • Dual interface: TTL UART for embedded boards plus USB for direct laptop prototyping
  • Full 860-960MHz UHF band coverage for global tag compatibility
  • Supports EPC Gen2 and ISO18000-6C, the dominant passive UHF protocols
  • Standard R200 command set for straightforward firmware porting
  • Compatible with ESP32, Raspberry Pi, and common microcontroller platforms

Technical Specifications

  • Chipset: R200 UHF reader chip
  • Frequency: 860-960MHz (global UHF band)
  • Read Range: up to 2 metres with suitable antenna
  • Interface: TTL UART and USB
  • Protocol: EPC Gen2 / ISO18000-6C
  • Antenna: external, 0-12dBi compatible
  • Supply: low-voltage DC, module-level power draw
  • Compatibility: ESP32, Raspberry Pi, Arduino and general MCU platforms
  • Use Cases: inventory, access control, asset tracking, library systems
  • Form Factor: bare module for embedding in custom hardware

Application Scenarios

This module fits the engineer building a smart shelf that knows when stock leaves, the facility manager prototyping badge-based access, the library automating returns, and the maker tagging tools so nothing disappears into a drawer. It also suits anyone learning UHF RFID who wants real two-metre range rather than a near-field toy. Because the interface is standard, the same module carries a project from first breadboard test through to a deployed enclosure.

Frequently Asked Questions

Q: Do I need an external antenna?

A: Yes, the module is supplied as a reader board and works with an external UHF antenna. Read distance scales with the antenna you connect, so a 12dBi panel will reach considerably further than a small patch. Message us if you want a pairing recommendation for your project.

Q: Can I connect it directly to a laptop?

A: Yes, the USB interface lets you talk to it from a computer without an extra board. Most people use this for first tests and command exploration, then move to the TTL UART connection when embedding the module in a product. Both paths use the same command set.

Q: Which microcontrollers work with it?

A: Any board with a spare UART will work, which includes ESP32, Raspberry Pi, Arduino and most general MCUs. You only need to match the logic level and supply voltage of your host. The standard command set means community code examples port easily.

Q: What tags can it read?

A: It reads passive UHF tags that comply with EPC Gen2 or ISO18000-6C, which covers the large majority of UHF labels and cards sold today. It will not read low-frequency or high-frequency tags such as 125kHz or 13.56MHz NFC, which use different physics entirely.

Q: Is this suitable for a commercial product?

A: Yes, the R200 chipset is used in commercial readers, so it is not a hobby-only part. Many makers prototype with this module and keep it in the shipped design. You should validate the final assembly against your local radio regulations before mass production.

Q: How accurate is the two-metre range figure?

A: The figure assumes a suitable antenna and a favourable tag orientation. In practice, range depends on antenna gain, tag quality, and what is between them. Treat two metres as a realistic working target, not a guaranteed minimum, and test with your own tags.

Customer Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen