説明
The parts nobody photographs are the ones you notice every day. Nobody buys a Levante for its rear air vent surround. But every passenger who sits in the back looks straight at it, and after six or seven years of elbows, bags and summer sun, the original trim goes dull in a way that makes the rest of the interior look tired. That is a strange thing to accept in a car whose whole argument is that the details were considered.
This surround corrects it without a workshop visit. The piece is molded in ABS to the shape of the rear vent frame, finished in chrome or carbon fiber effect, and it arrives with automotive adhesive already applied to the back. Clean the surface, line it up, press and hold. There is no drilling, no removal of the console, and nothing to disconnect. The fit follows the original part lines, so the edge sits tight against the vent instead of floating above it.
The choice of ABS matters more than it sounds. It holds its shape through the temperature swings a car interior sees, from a dashboard baking in August to a cold start in January, and it does not chalk or yellow the way cheaper plastics do. The finish is applied rather than painted on thin, which is why the reflection reads as brightwork rather than as a sticker. And because it is an overlay, the original trim stays untouched underneath, which matters at resale.
An interior is judged by the parts the spec sheet never mentions.
What Changes in the Cabin
- ✦Shaped specifically for the Maserati Levante rear air vent frame, 2016 to 2023.
- ✦Chrome or carbon fiber effect finish that matches the surrounding brightwork.
- ✦ABS construction that resists interior heat cycles without warping or chalking.
- ✦Automotive adhesive pre-applied, so installation needs no tools and no drilling.
- ✦Overlay design that leaves the original trim intact and reversible.
- ✦Tight part-line fit that closes the gap instead of sitting proud of the console.
- ✦Single-piece trim, no cutting or trimming to fit.
Fitment and Specification
- Fitment: Maserati Levante 2016 to 2023
- Position: Rear center air conditioning outlet vent, frame surround
- Material: ABS plastic
- Finish: Chrome or carbon fiber effect, per variant
- Installation: Pre-applied automotive adhesive tape
- Dimensions: 18.5 cm length x 17.5 cm width x 3.5 cm height
- Weight: Approximately 100 g
- Pieces: 1 trim surround
- Certification: ISO 9001
- Reversible: Yes, removes with gentle heat and no residue on the original part
- Origin: Mainland China
When This Is the Right Purchase
Three situations call for it. A used Levante whose rear trim has dulled and cannot be polished back. A car going to sale where the interior photographs matter more than the mechanical history. Or an owner who simply wants the rear cabin to match the front. It is not a performance part and it does not pretend to be. It is the small correction that stops a premium interior from looking older than the car.
Questions Before Fitting
Q: Will it fit my model year?
It is shaped for the Levante from 2016 through 2023, which uses the same rear vent surround across that run. If your car has a modified or aftermarket rear console, check the vent frame shape against the product images first.
Q: Do I have to drill or remove the console?
No. The adhesive is already on the back of the trim. Clean the surface with an alcohol wipe, warm the tape slightly if the car is cold, position it dry first, then press and hold for about thirty seconds.
Q: Can it be removed later?
Yes. Gentle warmth from a hair dryer softens the adhesive and the trim lifts away. Any residue comes off with an adhesive remover, and the original surround underneath is untouched.
Q: Does the chrome finish match the original brightwork?
It is matched to the satin chrome used on the Levante interior rather than a mirror polish, so it reads as part of the car instead of an addition.
Q: Will it hold in summer heat?
Automotive acrylic foam tape is rated for interior temperatures well above what a parked cabin reaches, and ABS holds its shape across that range. Surface preparation is the variable that matters most.
Q: Is it one piece or a set?
One surround for the rear center vent. It is a single trim piece, not a multi-part kit, so there is nothing to align against a second component.
Q: Does the finish fade in direct sun?
The finish is a molded surface layer rather than a thin paint film, so it holds its tone through normal cabin exposure. Parking under glass in high summer is hard on any interior finish, and a sunshade is the same advice it would be for the original trim.
Q: Can it be fitted in cold weather?
Yes, with one adjustment. Warm the adhesive side with a hair dryer for twenty seconds before fitting, and keep pressure on the trim for a minute rather than thirty seconds, so the tape bonds at a temperature it is happy with.
Fitment Detail
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません
