The Silent Board | BIGTREETECH SKR MINI E3 32-Bit Mainboard

East Supplier PlatformSKU: 1005006743547807-MINI E3 V2.0 and 3.0

Color: MINI E3 V2.0 and 3.0
価格:
$192.55

税込み 送料計算済み チェックアウト時

在庫:
在庫あり (43個), 出荷準備完了

説明

A 3D printer is judged by its worst layer, not its best one. Most owners spend their first month chasing slicer settings when the noise and the artefacts are coming from the controller. The SKR MINI E3 replaces the stock Melzi-style board in an Ender 3 class machine with a 32-bit mainboard and dedicated silent stepper drivers, and the change is audible in the first minute and visible in the tenth print.

The board is a drop-in replacement. It shares the mounting footprint and the connector layout of the original controller, so the wiring reconnects where it came from: motors, thermistors, heater cartridge, fans, endstops. Nothing needs to be soldered and nothing needs to be cut. Owners who have never opened an electronics enclosure before can complete the swap with a screwdriver and the photographs in the firmware repository.What you gain is headroom. A 32-bit processor manages the move queue, the lookahead planner and the thermistor sampling without the stutter that shows up as ringing on fast infill. The onboard silent drivers run the steppers in a mode that removes the stepper whine from the room while keeping the torque that the stock board cannot quite deliver at higher acceleration. The result is a machine that is quiet enough to live in a home office and accurate enough to print functional parts at speed.Firmware remains the owner's choice. The board works with the mainstream open-source firmware ecosystem, and BIGTREETECH maintains the reference configurations for the Ender family so that the first compile is a matter of setting the right board identifier rather than mapping pins by hand. Marlin remains the default, and the board is equally comfortable under Klipper when you are ready to hand the motion planning to a host computer.

You are not upgrading a printer. You are removing the reason it misbehaves.


Why Owners Swap This Board

  • 32-bit motion planning the move queue and lookahead are handled by a modern ARM-class processor instead of an 8-bit controller, which reduces ringing on fast infill.
  • Silent stepper drivers onboard drivers cut the audible stepper whine without sacrificing acceleration torque.
  • Drop-in footprint same mounting holes and connector layout as the stock Ender-class controller, so no drilling and no rewiring of harnesses.
  • Reference firmware available BIGTREETECH publishes configuration files for the Ender family, which shortens the first flash considerably.
  • Marlin and Klipper ready run it standalone with Marlin, or hand motion control to a host computer with Klipper.
  • Six stepper channels enough for dual Z or a second extruder depending on which revision you choose.
  • Screen options available with or without the TFT35 touchscreen, so you can keep your existing display or move to a touch interface.

Technical Specifications

  • Board class 32-bit mainboard replacement for Ender 3 class machines
  • Mounting drop-in footprint compatible with the original controller enclosure
  • Stepper channels X, Y, Z, E plus expansion depending on revision
  • Drivers onboard silent stepper drivers, no separate modules required
  • Firmware Marlin reference configuration and Klipper support
  • Host interface USB and microSD, serial connection for host control
  • Thermistor inputs hotend and bed channels with standard 100K compatibility
  • Power input standard 24V printer supply
  • Variant options SKR MINI E3 revisions and bundles with the TFT35 screen
  • Compatibility Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 class chassis

Where It Belongs

This is the board for the owner who has reached the ceiling of the stock controller. If your machine is loud enough that you schedule prints around sleep, if corners bulge when you push acceleration, or if you simply want a platform that a modern slicer can talk to without workarounds, the swap is the cheapest meaningful upgrade on the machine. It also suits workshop operators running several printers in one room, where a single quiet board multiplies across a print farm and the noise reduction stops being a comfort question and becomes a scheduling one.


Frequently Asked Questions

Q: Will it fit my Ender 3 without drilling?

A: The mounting footprint matches the original controller, so it installs into the existing enclosure. If your machine has a non-standard enclosure, measure the original board footprint first and message our team if you need help checking.

Q: Do I need to solder anything?

A: No. The wiring reconnects to the same style of connectors the stock board uses. The swap is a screwdriver job.

Q: Is firmware difficult to install?

A: The first flash is the steepest part of the project. BIGTREETECH publishes reference configurations for the Ender family, and the community documentation walks through the board identifier and the compile step. If you can edit a configuration file, you can complete it.

Q: Will it work with Klipper?

A: Yes. The board is a common choice for Klipper conversions, where motion planning moves to a host computer and the board handles the hardware layer.

Q: Does it include the touchscreen?

A: Some variants ship with the TFT35 touchscreen and some ship as the board alone. Check the option names on this page, and our team can confirm the contents of the specific bundle before you order.

Q: How much quieter is it really?

A: The change is dominated by the drivers rather than the processor. Owners routinely describe the machine dropping from a noticeable whine to a low hum, which is the difference between a printer that lives in a spare room and one that can live next to a desk.

Q: Can I run two extruders?

A: Not with the base revision. Dual extrusion needs a board with more stepper channels, so for that build you should look at a full-size controller instead.

Q: What happens if I make a mistake flashing it?

A: The bootloader path on these boards is recoverable. Follow the vendor instructions for entering the bootloader, and the board can be reflashed rather than replaced.


The EastSupplier Promise

Every board we ship is inspected before it leaves the warehouse, and every listing is written by people who have run the hardware rather than copied a supplier description. If the firmware configuration fights you, message our team and we will help you find the right reference file. Ordering, shipping and after-sales support are handled end to end, so a problem with the board is a conversation with us, not a ticket into a void.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
L
Lena H.
Klipper runs beautifully

Moved from Marlin to Klipper with this board and the motion quality is a step up. No layer shifts on tall prints, and the driver silence is a real quality of life change.

A
Andre G.
Read the board revision first

Install is easy if you check which revision you have before ordering. Six stepper channels gave me dual Z without an add-on board, which was the reason I bought it.

Y
Yuki M.
Firmware was straightforward

BIGTREETECH publishes the configuration files and I was printing again the same evening with Marlin. The 32-bit board plans moves much better, so corners are cleaner at speed.

P
Peter L.
The printer is silent now

Swapped this in for the stock board on an Ender style printer and the stepper whine is gone. Same mounting holes, same connectors, so it was a direct drop in.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen