説明
The difference between a clone and a tool is not the plastic shell. It is the PCB inside, and whether the board was built with the components the firmware expects. A single-board adapter that reports the wrong chipset will connect, read a couple of modules, then drop the session halfway through a diagnostic routine.
This unit is the dual-PCB V3.0 board with real 9241A transceivers and the NEC relay array, the version that supports the full multiplexer set: two high-speed CAN channels, single-wire CAN, K and L line, J1850 VPW and PWM, RS485 for truck protocols, and TTL. That is why the same interface works on a 1998 petrol car and a 2023 Euro 6 tractor unit, across 47 car and light van brands and 37 truck, bus and trailer brands.
The software is 2021.11 on CD, with a keygen supplied so no remote activation is required, and it runs on anything from a Windows 7 32-bit laptop to Windows 11. It ships with Bluetooth, which means the laptop stays on the bench while the adapter is under the dash, and the automatic system scan can enumerate every module on the vehicle without you touching a menu.
A diagnostic tool is judged on the vehicle it cannot read, not the one it can.
What Makes It Different
- Dual PCB V3.0 with real 9241A chips — the component set the firmware was written for, which is what stops mid-session disconnects on older K-line vehicles.
- NEC relay array — handles protocol switching mechanically rather than through a single multiplexing chip, the arrangement original tools use.
- Full multiplexer support — 2x HS-CAN, SW-CAN, K/L, J1850 VPW and PWM, RS485 (J1708) and TTL for truck work.
- 47 car brands and 37 truck brands — cars and light vans from 1988, trucks, buses and trailers from 1995, models through 2023.
- Bluetooth link — the laptop stays on the passenger seat while the adapter is plugged in under the dash.
- 2021.11 software with keygen, no remote activation — install on as many workshop laptops as you own, offline.
Technical Specifications
- Hardware: Dual PCB V3.0 with real 9241A transceivers and NEC relays
- Protocols: 2x HS-CAN (ISO 11898-2), SW-CAN (SAE J2411), K/L (ISO 9141-2), J1850 VPW/PWM, RS485 (J1708), TTL
- Coverage: 47 car and light van brands from 1988; 37 truck, bus and trailer brands from 1995; models to 2023
- Software: 2021.11 on CD with keygen, self-activation
- Operating System: Windows XP, 7 32-bit, 10 and 11
- Connection: Bluetooth plus USB
- Languages: English, Spanish, French, Italian, Portuguese, German, Dutch, Polish, Russian, Czech, Danish, Finnish, Greek, Hungarian, Norwegian, Romanian, Turkish and more
- Functions: Full system scan, fault code read and clear, live data, actuation tests, service and adaptation resets
- Warranty: 2 years
- Included: Interface unit, software CD, cables, carry case
Where It Belongs
Independent workshops use it as the second tool after the brand-specific scanner, for the vehicles that arrive without a matching franchise cable: a 2004 Renault van, an imported Japanese hybrid, a 2019 tractor unit. Mobile mechanics use the Bluetooth link because it lets them read live data while the vehicle is being driven, with the laptop on the passenger seat. Fleet operators keep one on the shelf for pre-purchase inspections and for reading trucks whose dealer software charges a subscription. Enthusiasts buy it for the same reason: one interface covers the family fleet, the project car and the tow vehicle without a per-brand licence.
Questions Buyers Ask
Q: How do I know this is not a single-board clone?
A: Ask before ordering and check on arrival: the dual-PCB V3.0 has two stacked boards, real 9241A transceiver chips and a visible NEC relay array. A single-board clone has one board and a multiplexing chip in place of the relays.
Q: Does it need internet activation?
A: No. The 2021.11 software ships with a keygen and activates locally, so it installs on an offline workshop laptop and keeps working without a network connection.
Q: Will it read my 2022 truck?
A: The 2021.11 database covers cars and trucks up to 2023, including Euro 6 heavy vehicles through the RS485 and J1708 protocols. Very new models released after that date may have modules the database does not yet list.
Q: What laptop do I need?
A: Anything running Windows 7 32-bit through Windows 11. The hardware is a Bluetooth or USB serial device, so no special driver beyond the one on the CD is needed.
Q: Can I use it while driving?
A: Yes, and that is one of the reasons to choose the Bluetooth version. Live data and recording work with the adapter under the dash and the laptop in the passenger seat.
Q: Is the software legal where I live?
A: The tool reads and clears diagnostic data on vehicles you have lawful access to. Check local regulations for anything beyond diagnostics, and never use it to alter odometer or emissions-related data.








Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません
