Descrizione
A hillside is not a problem to be solved by hand. Every season there is a slope that refuses to be mowed. Terraces behind the orchard, the embankment above the drainage ditch, the strip along the fence line where a walk-behind cutter loses traction and the operator loses footing. Those are the places where the work usually stops, or where somebody takes a risk that the job does not deserve. The Terra Sentinel was engineered around exactly that patch of ground.
The machine is built on a crawler undercarriage that weighs in at 140 kg and climbs to 45 degrees without asking for help. A 15HP-class gasoline engine drives a 500 mm cutting disc, and the cutting height runs from 20 mm to 150 mm so the same pass handles summer grass and winter brush. Disc height is adjusted from the transmitter, not by crawling underneath the deck with a spanner. Power for the control system comes from an onboard 12V 12A circuit, and the whole unit travels at roughly 3 km/h, which is the speed at which a cutting disc actually clears material instead of smearing it.
The footprint is 930 x 860 x 640 mm and it ships crated at 175 kg, so it moves on a small trailer or in the back of a light truck. Every unit leaves with a machinery test report and a one-year machine warranty, with six months on the engine core. Nothing about this class of equipment belongs to a marketplace listing written in three languages and translated badly. It belongs to a buyer who has ground to clear and a schedule to keep.
You do not climb the slope. You command it.
Key Features
- ✦ 45-degree climb capability on a 140 kg crawler chassis - embankments and terraces stop being off-limits.
- ✦ 15HP-class gasoline engine with a 500 mm cutting disc for grass, weeds and light brush.
- ✦ Remote-controlled cutting height from 20 mm to 150 mm, adjusted while the machine is running.
- ✦ Radio control keeps the operator clear of the cutting deck and out of the ditch line.
- ✦ 930 x 860 x 640 mm operating footprint, crated at 175 kg for standard trailer transport.
- ✦ Machinery test report supplied with every unit; 1-year machine warranty and 6 months on the engine core.
- ✦ Travel speed of about 3 km/h tuned for clean cutting rather than racing across the field.
Technical Specifications
- Engine Type: Single-cylinder gasoline, 15HP class
- Rated Power: 16HP (engine rating per manufacturer)
- Applicable Power Range: 7.5 - 9.5HP on the base configuration, 16HP on the high-output build
- Cutting Width: 500 mm
- Cutting Height: 20 - 150 mm, remote adjustment
- Climbing Ability: 45 degrees
- Traveling Speed: 3 km/h
- Electrical System: 12V 12A
- Operating Weight: 140 kg
- Package Weight: 175 kg
- Overall Dimensions: 930 x 860 x 640 mm
- Package Dimensions: 990 x 990 x 810 mm
- Undercarriage: Crawler / track drive
- Warranty: 1 year machine, 6 months core components
- Origin: China
Where It Works
This is land-management equipment aimed at the ground that machines normally cannot reach. Slope orchards and terraced fruit farms use it to hold back the vegetation between rows without sending staff onto gradients. Farms with drainage ditches, irrigation channels and pond banks run it along the waterline where a walk-behind cutter would bog down. Municipal and park crews hand it the embankments beside roads and the strips under guardrails. Solar farms and industrial sites use it to keep panel rows and service corridors clear. Because the cutting height is remote-adjusted, the same unit switches from a lawn finish to rough brush clearing without a tool change or a second machine.
Frequently Asked Questions
Q: Does the controller work at a distance?
A: Yes. Both travel and disc height are operated from the hand-held transmitter, which is the whole point of this configuration: the operator stays on stable ground while the crawler does the slope. Keep line of sight to the machine, as you would with any radio-controlled implement of this weight.
Q: How steep a slope can it actually handle?
A: The manufacturer rates the crawler at 45 degrees. In practice, grass moisture matters more than the angle - wet spring grass reduces traction well before the gradient does. Mow facing uphill on freshly cut slopes and let the tracks bite.
Q: Can it cut brush, or only grass?
A: It is a disc cutter, so it handles grass, weeds and woody growth up to the rough-brush range. It is not a forestry mulcher - if you are clearing saplings over a few centimetres in diameter, step up to a flail machine.
Q: What engine fuel and maintenance does it need?
A: Standard gasoline, four-stroke service intervals. Change the oil and clean the air filter on the schedule in the manual, keep the blade sharp, and the track tension checked. The engine core carries six months of warranty; the machine carries a year.
Q: How does it ship, and what arrives in the crate?
A: One crated unit at 175 kg packaged weight, on a 990 x 990 x 810 mm pallet. It arrives assembled to the point of first use, with the transmitter, tool kit and machinery test report. A forklift or a small crane makes unloading straightforward.
Q: Is this the right machine for a half-acre garden?
A: Honestly, no. On flat domestic lawn this is more machine than the job needs. Buy it when the ground is steep, wet, or wide enough that walking behind a cutter becomes the bottleneck. That is the only reason this class of equipment exists.
The EastSupplier Promise — every unit is inspected, packed for export, and shipped from a vetted factory line. If the specification differs from what is described here, we replace it. No middlemen, no relabelled stock, no surprises at the border.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.