Descrizione
Every car has a seat belt designed for a crash test dummy, and a crash test dummy sits at a fixed height. Real drivers do not. A shoulder belt that crosses the neck instead of the collarbone is not a safety feature at that moment, it is a reason to put the belt behind an arm, which is a considerably worse decision than the one the belt was trying to prevent. The Seat Ease is a small ABS clip that slides onto the belt webbing and holds the diagonal at the height the occupant actually needs.
The mechanism is deliberately simple. Each clip fits around the webbing and clamps it in place, and because it can be moved up and down the belt it works for a tall driver and a short passenger in the same vehicle without any adjustment to the seat or the anchor point. On long journeys the practical effect is that the belt relaxes slightly against the chest, which is the difference between a two hour drive and a stop at a service station to rub your shoulder. The clip also stops the belt from creeping tighter as you move, which is the version of the problem most people notice first.
Two pairs are supplied, so both front seats can be set, and the ABS body is moulded to a 6.2 by 1.6 centimetre profile that sits flush against the belt rather than standing off it. It is a universal fit rather than a marque-specific part, which means the same clip works in a BMW, an Audi, a Volkswagen or a Hyundai, and it can be moved to the next car rather than bought again. Install takes seconds: thread the belt through, position it, and check the belt still retracts and locks normally before driving.
Two clips, two seats, and the belt finally sits where it was designed to sit.
Key Features
- ✦ Two pairs included: both front seats can be set in one purchase, in black, beige or one of each.
- ✦ Adjustable along the belt: a sliding clamp lets the diagonal section sit at the correct height for the occupant rather than the seat anchor.
- ✦ Relieves shoulder and neck pressure: the belt rests against the collarbone instead of pressing into the neck or the shoulder joint on a long drive.
- ✦ ABS body at 6.2 x 1.6 cm: moulded flush to the webbing, so it does not stand off the belt or catch on clothing.
- ✦ Universal fit: works with standard webbing in most cars, including BMW, Audi, Volkswagen and Hyundai, with no marque-specific parts.
- ✦ Holds the belt without interfering with the retractor: the belt still spools and locks normally when it is fitted correctly.
- ✦ Moves between vehicles: unclip and refit in the next car, since nothing is bonded, drilled or permanently mounted.
Technical Specifications
- Set contents: 2 pairs of adjustable seat belt clips
- Material: ABS plastic
- Dimensions: 6.2 x 1.6 cm
- Adjustment: Slides up and down the belt webbing
- Colour options: Black and beige, supplied per variant
- Fitment: Universal, for standard seat belt webbing
- Function: Reduces shoulder and neck pressure, holds belt slack in position
- Installation: No tools, threaded onto the belt by hand
- Certification: ISO 9001 manufacturing standard
- Item weight: Approximately 0.1 kg per set
- Origin: Mainland China
- Brand: EastSupplier Auto
Application Scenarios
The Seat Ease is bought for two reasons and both are about distance. For the daily commute it removes the small irritation of a belt that has drifted against the neck, which is the complaint that leads people to tuck the belt under an arm, an outcome no safety engineer would choose. On longer journeys, on drivers who are tall or short relative to the seat, and in cars whose B pillar height does not suit the person driving them, the adjustable clamp is the difference between the belt sitting correctly and being tolerated. Fleet and hire operators get a second benefit: because the clips are movable and reversible, one set covers whichever driver is in the vehicle that day, and there is nothing to re-order when the vehicle changes.
Frequently Asked Questions
Q: Will these fit my car?
They are a universal design that fits standard seat belt webbing, and they have been used across BMW, Audi, Volkswagen and Hyundai interiors. Compare the belt width with the 6.2 by 1.6 cm clip profile; if the webbing is standard passenger car width, it fits.
Q: Do they affect how the belt locks in an impact?
The clip holds the diagonal section at the height you set. The belt itself still retracts, locks and loads normally, provided the clip is fitted onto the belt as shown and the belt is not routed behind your arm.
Q: How many clips do I receive?
Two pairs, which is four clips in total, so both front seats can be fitted. One pair per seat is the normal arrangement.
Q: Do they work on child seats?
They are intended for adult occupants on standard belts. Do not modify the belt path on a child seat or booster, since those are designed around a specific routing that the clip would change.
Q: How do I install them?
Thread the seat belt through the clip, slide it to the height you want, and press it closed. Test that the belt still retracts freely and still locks under a firm pull before driving.
Q: Are they available in different colours?
Yes, in black and in beige, selected through the variant options. Both colours are supplied as pairs.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.