The Beam Clear | Headlight Restoration Kit

Risparmia 20%
East Supplier PlatformSKU:1005007419080782-GERMANY

Prezzo:
$64.71 $80.89

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibili (1270 pezzi), pronti per essere spediti

Descrizione

You cannot see a lane that your headlight cannot share. The Beam Clear is a careful coating that brings a fogged, yellowed lens back to a glass-bright lane, so the beam reaches the asphalt and the inspection line, at once.

Years of road film, sun and haze drain the headlight until the maker's lane becomes a dim, shameful glow. The kit lifts that layer with a gentle cut then a sealant, and a fresh cycle of the lights returns the bare white through puddles of weeks.

The polish follows a wet and dry grit to a careful finish, and the sealant repels the film that brings the fog back. Work it in sun or shade at an even speed and the lens clears without the melt or the crack of a heat gun nearby.

It fits the trim around most lamps and does not disturb the surrounding paint. A careful cut and a sealed once-a-year is a good, economical breath to the front of the car.

Let the car see the road, and let the road see the car.


Key Features

  • Wet-sand stages to a smooth, clear lens
  • UV sealant that repels the return of haze
  • Under 20 minutes on most headlamps
  • Gentle on the lamp enclosure and trim
  • Brings back the full beam
  • Adds to the car's look and resale

Technical Specifications

  • Kit — Sandpaper, polishing pad, UV sealant
  • Steps — Cut, polish, seal
  • Time — About 20 minutes per lamp
  • Effect — Clears haze and yellowing
  • Coverage — One kit is enough for two lamps

Application Scenarios

Bring the front of an older car back to spec - cut the haze, polish to a shine and seal against UV. The whole job fits in a tucked hour and the headlight returns to throwing a straight, stark lane on the last wet road of the season.

Frequently Asked Questions

Q: Is it safe on the lens?

It is a controlled abrasive stage with a polish after; on a factory lamp it is the standard restoration path.

Q: How long before the seal gives?

Sealed and clean, most lamps stay bright for months.

Q: Do I need a machine?

By hand with a gentle even speed has been fine.

Q: Does the haze ever come back?

The UV seal is the main keeping the film away for the season.

Customer Reviews

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen