Descrizione
Most rooms do not need more furniture. They need a line. A single horizontal edge at the right height pulls a wall together, gives the eye something to follow, and makes a plain surface read as composed. The Meridian Line is that edge: five metres of mirror finish stainless steel in four tones and five widths, self adhesive, and thin enough to disappear into the architecture rather than sit on top of it.
The reflection is doing quiet work. A mirror finish strip along a ceiling edge or a skirting line bounces light back into a room and creates the impression of extra depth without the cost or the commitment of a mirrored wall. Because the surface is genuine stainless steel at one millimetre rather than a metallised plastic film, the reflection stays neutral instead of picking up the yellow cast that cheap mirror tape develops under warm bulbs.
Installation is the part that decides the result. The strip carries a strong adhesive backing, but any bond is only as good as the surface under it. Clean the wall, let it dry fully, and press the strip in one continuous pass rather than working it section by section. On tiled or painted surfaces that see moisture, a thin bead of silicone along the top edge extends the life of the bond considerably. Cut with a fine tooth blade or a metal snip, and cut slightly long rather than slightly short.
The material also solves a safety problem that glass cannot. At one millimetre the stainless steel is shatter proof and light, so it can go where a glass mirror should not: a child's room, a bathroom at shoulder height, a rental where you cannot drill. It is waterproof, washable and removable with a warm air pass and a slow peel, which means the line is a decision you can reverse.
Architecture is mostly a matter of where you put the lines.
Key Features
- ✦ Five metres of continuous mirror finish stainless steel trim per roll
- ✦ Genuine 1mm stainless steel rather than metallised plastic film
- ✦ Four tones available: silver, gold, rose gold and black
- ✦ Five widths from 1cm to 4cm for skirting, dado and ceiling detail
- ✦ Protective transparent film on the face to prevent handling scratches
- ✦ Shatter proof and lightweight, safe for bathrooms and children's rooms
- ✦ Strong self adhesive backing with optional silicone reinforcement
Technical Specifications
- MaterialStainless steel, mirror polished
- Thickness1mm with protective transparent film
- Length5 metres per roll
- Widths1cm, 1.5cm, 2cm, 2.5cm, 3cm, 4cm
- FinishesSilver, gold, rose gold, black
- InstallationSelf adhesive backing, peel and press
- Finish PropertiesWaterproof, washable, rust resistant
- Suitable SurfacesTile, painted wall, laminate, glass, smooth wood, ceiling
- CuttingFine tooth blade or metal snip, cut slightly long
- RemovalWarm air and slow peel, minimal residue
Where It Belongs
Interior stylists use the narrow widths to frame a wall panel or outline a doorway, where a 1cm line reads as a deliberate detail rather than decoration. Landlords and renters use the wider 3cm and 4cm strips along skirting and ceiling edges to give a rented room architectural weight without drilling. Bathrooms take them around mirror edges and tile transitions, where the shatter proof material is the only sensible option. Retail and studio fit-outs use the gold and rose gold tones to build a display backdrop that photographs well, and the black finish suits a minimal scheme where a mirror line would read as too bright.
Questions Buyers Ask
Q: Will the adhesive hold on a painted wall?
A: It holds well on fully cured, clean and dry paint. Fresh paint needs at least a week to cure before any adhesive goes on, because solvent release under the strip will break the bond. On satin or gloss finishes, wiping with a degreaser first makes a noticeable difference.
Q: Can I cut the strip to a shorter length?
A: Yes. Use a fine tooth blade with light pressure or a metal snip, and score the protective film first so the edge stays clean. Cut slightly longer than the gap and trim in place, since stainless steel is unforgiving if you come up short.
Q: Does the mirror finish distort the reflection?
A: It reflects cleanly at close range and is neutral in tone. At very shallow viewing angles a 1mm strip shows a slightly compressed reflection, which is a property of any narrow mirror surface rather than a defect.
Q: Will it rust in a bathroom?
A: Stainless steel resists rust in normal bathroom humidity, and the polished face is waterproof. Prolonged standing water at the cut edge is the one exposure worth avoiding, so seal cut ends with a clear varnish if the strip sits directly in a splash zone.
Q: How do I remove it without damaging the wall?
A: Warm the strip with a hairdryer to soften the adhesive, then peel slowly at a shallow angle. Any residue lifts with warm soapy water or an adhesive remover. On painted walls, expect to touch up the paint line after removal rather than the wall itself.
Q: Which width is right for a ceiling edge?
A: The 2.5cm and 3cm widths read best at ceiling height, because the eye needs more visual weight at that distance. The 1cm and 1.5cm widths are better matched to cabinet edges and picture frames where the viewer is closer.
The EastSupplier Promise
Every listing is checked before dispatch: specification verified against the manufacturer sheet, packing inspected, and stock confirmed in the warehouse shown on this page. If an item arrives outside specification, send photographs within 30 days and we replace or refund. Write to service@eastsupplier.com with your order number and a person reads it, not a queue.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.