Descrizione
Brushed metal finishes are the hardest wraps to fake. A printed chrome looks like foil at two metres and like plastic at thirty centimetres, because the light does not move across it the way it moves across a brushed surface. This film is embossed rather than printed, so the grain is physical and the highlight travels as the angle changes.
The construction is a 0.15 to 0.17 mm PVC face over a removable imported adhesive at 0.025 mm, with air-release channels cut into the glue layer. Those channels are why installation is forgiving: trapped air escapes under a squeegee instead of becoming a bubble you have to pierce. The face stretches 33 percent under moderate heat, which is enough to follow a mirror housing or a bumper return without lifting at the edge.
It is rated from minus 50 to plus 200 degrees Celsius, holds against water, grease, salt and weak acids, and comes off years later without taking paint with it. Three tones are stocked: gray, black and silver, in four sheet sizes from a 30 by 152 cm trim piece up to 50 by 300 cm for a roof or a bonnet panel.
A finish that survives the winter it was installed in.
What Makes It Different
- ✦Physical brushed embossing rather than a printed metallic image
- ✦Air-release adhesive channels that let trapped air escape under the squeegee
- ✦0.15 to 0.17 mm PVC face with 33 percent stretch for compound curves
- ✦Imported removable glue that lifts cleanly without damaging factory paint
- ✦Rated from minus 50 to plus 200 C for engine-adjacent and exterior panels
- ✦Three-year warranty against lifting and fading under normal exposure
- ✦Four sheet sizes from trim work to a full roof or bonnet panel
Technical Specifications
- MaterialPVC with embossed brushed grain
- Thickness0.15 to 0.17 mm face
- AdhesiveImported removable glue, 0.025 mm, 20 g per square metre
- Air releaseChannelled adhesive layer
- Stretch33 percent under heat
- Temperature rangeMinus 50 C to plus 200 C
- Sizes50 x 52, 30 x 152, 50 x 200 and 50 x 300 cm
- ColoursGray, black, silver
- Durability3 to 4 years outdoor, 5 to 6 years indoor
- RemovalHeat and peel, residue-free on cured factory paint
Where It Earns Its Place
It goes on interior trim first for most buyers, because a centre console or a door pull is a small piece that shows the quality immediately. Roofs, bonnets, mirror caps and motorcycle tanks are the next step up, and the larger sheets cover those in one piece. Architectural use is common too: lift fascias, shop counters, and appliance fronts, since the film is rated for indoor service life beyond five years. Windsurf and ski shops use the trim sizes for repairs where a painted finish would never match.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Will it damage my paint when I remove it?
Not on factory paint in good condition. The adhesive is a removable grade and releases with gentle heat. Repainted panels, peeling clear coat and aftermarket resprays are the cases where removal can lift finish, so test a small area first.
Q: Do I need a heat gun to install it?
For flat panels, no. For curves, edges and recesses you need heat to relax the face, and a hair dryer will do at a slower pace. A squeegee with a felt edge is the other essential tool.
Q: How much do I need for a roof?
The 50 by 200 cm sheet covers most saloon roofs with a margin. For an estate, a van or a roof with rails, take the 50 by 300 cm.
Q: Does the brushed grain show fingerprints?
It hides them better than gloss or matte black, which is one reason it is popular for interiors. A dry microfibre wipe brings the sheen back without polish.
Q: Can it go through a car wash?
Yes, once the edges are sealed and the film has cured for about a week. Avoid pressure washing within 15 cm of an edge, which is what lifts most wraps.
Q: Is it real metal?
No. It is PVC with an embossed brushed grain and a metallic pigment. It looks like brushed aluminium because the texture is physical, but it weighs and behaves like vinyl.
Q: Will the colour match the photos?
The silver reads brighter in daylight and warmer under tungsten. Gray is the most neutral of the three, black is closest to a gunmetal.
Q: What if a piece arrives creased?
Small creases relax with gentle heat. If the roll arrives damaged along an edge, send a photo and we replace the sheet rather than ask you to work around it.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.