Descrizione
Reversing is the moment the car becomes a trust exercise. The mirror shows a dark gap, the parking sensor beeps in a language of its own, and the backup light decides whether anyone else knows what you are doing. These W16W T15 LED bulbs replace the dim factory lamp with 2400 lumens of 3030-chip output, turning every reverse maneuver from guesswork into a well-lit statement.
The canbus design addresses the reason most LED swaps fail on modern cars: the body control module detects the low draw of an LED and flags a fault or triggers fast-flash. These bulbs are OBC error-free, engineered to communicate cleanly with the car electronics so you get full brightness with no dashboard warning, no hyperflash, and no silent electrical tantrums.
The 12V/24V tolerant driver runs the 3030 SMD array at a stable 30W, and the W16W/T15 interface (also 921/912 compatible) matches the sockets used across BMW, Mercedes-Benz, Audi, VW, Hyundai, Kia, Renault, Skoda, Seat, Ford, Chevrolet, Jeep and Peugeot models. Choose white, red or amber lens output to match position, brake, reverse and signal functions.
The car electronics can be fussy. These bulbs speak their language fluently.
Key Features
- 2400 lumens of 3030-chip LED output, several times brighter than factory filaments
- Canbus OBC error-free design, no dashboard warnings and no hyperflash
- W16W / T15 interface, also compatible with 921 and 912 sockets
- Wide 12V-24V operating range for cars, vans and light commercial vehicles
- Stable 30W power stage with aluminum heat management
- White, red or amber lens options for reverse, brake, position and signal duties
- Universal fit across major European, US and Asian car brands
Technical Specifications
- Interface: W16W / T15, compatible with 921 / 912
- Light Source: 3030 SMD LED array
- Brightness: 2400 LM per pair output rating
- Power: 30W
- Voltage: 12V / 24V
- Error-Free: Canbus OBC compatible, designed to avoid fault codes
- Lens Options: White, red, amber
- Function: Backup / reverse, position, brake and signal use
- Package: 2 bulbs per set
Who It Is For
For drivers who reverse into tight urban parking, for van and fleet operators who back into loading bays at night, for anyone whose modern car rejects generic LED bulbs with dashboard drama, and for the enthusiast who wants the rear of the car visible from the far end of the lot. Confirm the bulb code on the existing lamp before ordering: W16W, T15, 921 and 912 all share this socket pattern, and the lens color determines where each bulb may be installed. For vehicles that run bulb checks on engine start, the canbus design prevents the usual warning lamp, and the pair covers the two rear reverse positions on most vehicles.
Frequently Asked Questions
Q: Will these fit my car?
The W16W/T15 socket also covers 921 and 912 positions, and the design fits the sockets used by BMW, Mercedes-Benz, Audi, VW, Hyundai, Kia, Renault, Skoda, Seat, Ford, Chevrolet, Jeep and Peugeot. Confirm your bulb code before ordering.
Q: Why does my car show an error with other LED bulbs?
European and modern cars monitor bulb resistance and react to the lower draw of standard LED bulbs with fault warnings or fast-flash. These bulbs are designed to be canbus error-free to prevent that behavior.
Q: What voltage do they run on?
The bulbs operate across 12V to 24V, covering passenger cars, vans and light commercial vehicles.
Q: Are they really 2400 lumens?
The pair is rated at 2400 lumens combined output using 3030 SMD chips, a substantial step up from stock filament output in the same socket.
Q: Which lens color should I pick?
White for reverse lights, amber for turn signals, and red for brake or position lights, depending on your vehicles setup and local regulations.
Q: Will they cause hyperflash on cars without canbus?
The built-in load management is designed to match factory filament draw expectations on canbus-equipped cars, so turn signal use does not trigger the fast-flash warning.
Q: How long do they typically last?
LED bulbs routinely outlast filament units by years in normal service, since there is no filament to burn out and the aluminum body manages heat effectively.
Q: How is this packaged for shipping?
The item is packed in protective packaging suitable for its size and weight, with the original retail presentation preserved where applicable. Tracking information is provided once the order ships.
Q: What should I do if the item is not what I expected?
Contact our support team with your order number and a short description of the issue. We handle quality concerns on a case-by-case basis and work toward a resolution that keeps you whole.
Q: How do I care for it long term?
Follow the care notes in the specification section, store it in a dry, shaded place when not in use, and give it a quick wipe or rinse after heavy use. Routine care keeps the product performing like new.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.