Descrizione
A Tire Pressure Light Is A Bill Waiting To Happen. The customer sees a warning, the shop sees a diagnosis, and the difference between a five minute reset and an hour of guesswork is the tool on the bench. This scanner was built for exactly that gap, and its coverage numbers are the reason it closes it.
The TP150 handles both 315 MHz and 433 MHz sensors, which between them account for the frequency range used across American, Asian and European vehicles. It activates known sensors, reads real-time data on pressure, temperature, battery condition and sensor ID, checks ECU-ID matching status, reads and clears TPMS fault codes, and resets the warning light once the fault is genuinely resolved. When a sensor has failed, the tool programs XTOOL TS100 replacements through four routes: automatic ID generation, manual ID entry, copying the ID by activating the original sensor, or copying the ID by OBD from the vehicle itself. Programming several sensors at once is supported, which shortens a four wheel job considerably.
The hardware is a 320 by 480 TFT display drawing on a 3,000 mAh 3.7 volt lithium battery, with USB Type-C and DB15 interfaces and WiFi for updates. Software updates are lifetime and free, delivered in one click over WiFi rather than through a cable and a licence fee. Fifteen languages are supported, including English, German, Spanish, French, Portuguese, Italian, Polish, Russian, Turkish, Japanese, Korean, Vietnamese, Arabic, Finnish and Traditional Chinese. The unit ships as the 2025 hardware and software version, and it is the same class of tool the market compares against the AUTEL TS601, the TS408 and the LAUNCH X431 TSGUN.
The warning light goes out because the fault is gone, not because the code was cleared.
Key Features
- ✦ Works with both 315 MHz and 433 MHz TPMS sensors, the two frequency bands in common use
- ✦ Activates all known TPMS sensors and displays real-time pressure, temperature, battery and ID data
- ✦ Relearn routines covering automatic, OBD, separate and copy-sensor-ID procedures
- ✦ Programs XTOOL TS100 sensors through four methods: automatic ID, manual entry, activation copy and OBD copy
- ✦ Programs multiple sensors simultaneously to shorten a four wheel job
- ✦ Reads and clears TPMS fault codes, checks ECU-ID matching status and resets the warning light
- ✦ Lifetime free one-click WiFi software updates on 2025 hardware
- ✦ Fifteen supported languages with three year warranty and lifetime technical support
Technical Specifications
- Brand: XTOOL
- Model: TP150
- Hardware version: 2025
- Software version: 2025
- Sensor frequencies: 315 MHz and 433 MHz
- Sensor activation coverage: Approximately 98 percent of OE, XTOOL and programmed aftermarket sensors
- Programming methods: Automatic ID generation, manual ID input, copy ID by activation, copy ID by OBD
- Relearn procedures: Automatic, OBD, separate, copy sensor ID
- Diagnostic functions: Read and clear TPMS codes, reset warning light, check ECU-ID matching, check OE sensor information, test records
- Display: 320 x 480 DPI TFT
- Battery: 3,000 mAh, 3.7 V lithium, rechargeable
- Interfaces: USB Type-C, DB15
- Updates: WiFi and USB connection, lifetime free software updates
- Languages: 15, including English, German, Spanish, French, Portuguese, Italian, Polish, Russian, Turkish, Japanese, Korean, Vietnamese, Arabic, Finnish, Traditional Chinese
- Certification: CE
- Warranty: 3 years, with lifetime technical support
Where It Belongs
Tire shops and general service garages are the primary home for a dedicated TPMS tool, because the alternative is a full diagnostic platform doing a job that only needs a handheld. A technician working through a four wheel sensor replacement uses the copy-by-OBD route to lift the original IDs from the vehicle and write them into replacement TS100 sensors, which avoids a relearn that would otherwise need a drive cycle. Independent garages take this on rather than sending customers to a dealer for a warning light, and the lifetime updates mean coverage grows with the vehicle park instead of expiring. Fleet and rental operators use the real-time sensor data and test records to spot a failing sensor before it strands a vehicle, and the fifteen language list matters to workshops in multilingual markets where a technician may not read the default English menus. Anyone comparing this against the AUTEL TS601, the TS408 or the LAUNCH X431 TSGUN is comparing against the same class of tool, and the deciding factors are the dual frequency coverage, the four programming routes and the absence of a subscription fee.
The EastSupplier Promise
Every unit is inspected before it leaves the warehouse. If a specification on this page does not match what arrives, we cover the return shipping and replace it. English-language support answers within one business day, and replacement parts for this category are stocked so a working unit stays working.
Frequently Asked Questions
Q: Does this require a subscription for updates?
No. Software updates are listed as lifetime and free, delivered in one click over WiFi or through the USB connection. There is no recurring licence fee to keep the tool current.
Q: Which sensors will it program?
It programs XTOOL TS100 sensors through four methods. For existing sensors, it activates roughly 98 percent of OE, XTOOL and programmed aftermarket sensors in the 315 MHz and 433 MHz bands.
Q: How do I copy the original sensor ID to a new sensor?
Two routes are available. Copy ID by activation triggers the original sensor and reads the ID, which works when the original still functions. Copy ID by OBD reads the ID from the vehicle's TPMS module, which is the route to use when the original sensor is missing.
Q: Can it reset the warning light?
Yes, it reads and clears TPMS fault codes and resets the warning light. The light stays off once the underlying fault has been located and resolved rather than merely cleared.
Q: What languages does it support?
Fifteen, covering English, German, Spanish, French, Portuguese, Italian, Polish, Russian, Turkish, Japanese, Korean, Vietnamese, Arabic, Finnish and Traditional Chinese. The default is English and the setting is changed in the menu before a software update.
Q: Will it work on my car?
The tool covers American, Asian and European vehicles and includes OE sensor information lookup by brand and part number. If you send your vehicle brand, model, year and VIN before purchase, the sensor coverage can be confirmed against your specific platform.
Q: What is in the box and what is the warranty?
The TP150 unit with its built in rechargeable battery, USB Type-C and DB15 interfaces, and a three year warranty with lifetime technical support. A database update is applied over WiFi before first use.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.