The Relay Loom | H4 Bi-Xenon Headlight Wiring Harness Pair

East Supplier PlatformSKU:1005003119963816-Default Title

Prezzo:
$16.01

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibili (473 pezzi), pronti per essere spediti

Descrizione

A headlight upgrade that flickers is worse than no upgrade at all. The bulb is rarely the culprit. In most H4 conversions the problem is the factory loom, which was sized for a halogen bulb and now has to carry the inrush current of a bi-xenon ballast through thin wire and a tired switch.

This harness pair moves that load where it belongs. The relay takes the switching current directly from the battery, so the original wiring only carries the signal rather than the full draw. Bulbs reach full brightness in a single step, the high and low beam change is crisp, and the load on the factory headlight switch drops far enough to end the dimming that shows up when the lights are switched on at idle.

Every connection is plug and play for H4 and 9003 sockets, which means no cutting into the factory loom and no soldering. The pair covers both sides of the vehicle, so the installation is symmetrical rather than a single-side experiment.

For workshops, the value is in diagnosis. When a customer complains of flickering bi-xenon lights, a relay harness is the cheapest first test, and having a pair on the shelf avoids waiting on a delivery before the car leaves the bay.

Give the current a shorter path. The light follows.

Key Features

  • ✦ Relay harness pair that takes switching current directly from the battery
  • ✦ Reduces load on the factory headlight switch, ending dimming and flicker at idle
  • ✦ Plug and play for H4 and 9003 sockets with no cutting or soldering
  • ✦ 12V rated for 35W and 55W bi-xenon and HID bulb conversions
  • ✦ Two harnesses per pack, covering both sides of the vehicle
  • ✦ Direct replacement design that leaves the factory loom intact
  • ✦ Rated for bi-xenon, HID and high-output halogen upgrades

Technical Specifications

  • Voltage: 12V DC
  • Application: H4 and 9003 bi-xenon, HID and halogen upgrades
  • Bulb Rating: 35W and 55W compatible
  • Contents: 2 x H4 controller harness, one per side
  • Installation: Plug and play, direct replacement
  • Colour: Black cable with standard connectors
  • Switching: Relay-driven, draws power from the battery
  • Compatibility: Fits vehicles using H4 or 9003 headlight sockets
  • Soldering Required: None
  • Best For: Headlight upgrades, flicker diagnosis, workshop stock

Where It Fits

This suits anyone converting a halogen headlight to bi-xenon or HID and finding the result inconsistent. It also fits the simpler case of an older vehicle whose headlights dim noticeably when the switch is pressed, a symptom that usually points at the factory loom rather than the alternator. Auto electricians keep a pair as a diagnostic part, and detailers and restorers use the harness to keep a classic vehicle's original wiring untouched during a lighting upgrade.

How It Compares

Consideration This Item Ordinary Alternatives
Current path Battery feed through a relay Full load through factory switch and thin wire
Brightness stability Full output immediately on switch Dim start and flicker at idle
Installation Plug and play, no cutting Splicing into the factory loom
Contents Two harnesses, both sides covered Single harness, second side purchased separately

Why It Matters

The reason a relay harness solves so many lighting complaints is electrical, not cosmetic. Thin factory wire adds resistance, and resistance turns current into heat and voltage drop. Feeding the bulb from a short battery path removes most of that drop, so the bulb sees the voltage it was designed for and the switch stops carrying current it was never rated for.

Frequently Asked Questions

Q: Will this work with LED bulbs as well as HID?

A: Yes. The harness carries the load for any H4 or 9003 bulb drawing up to the rated wattage, including high-output LED conversions.

Q: Does the relay make an audible click?

A: A standard relay click is normal and confirms the switching circuit is engaging correctly.

Q: Is there a fuse in the harness?

A: The harness takes its feed directly from the battery and is designed to work with your existing fuse protection. Check your vehicle wiring before installation.

Q: Do I need to disconnect the battery?

A: Yes, disconnect the negative terminal before fitting any electrical part. Installation itself is plug and play at the headlight connector.

Q: Does this suit a 24V truck?

A: It is rated for 12V systems. Confirm your vehicle voltage before ordering.

More Questions From Buyers

Q: Do I need to remove the bumper to fit these?

A: No. The harness connects between the factory plug and the bulb, so installation happens at the headlight housing rather than behind the bumper.

Q: Will this fix a flickering bi-xenon light?

A: It resolves the most common cause, which is voltage drop through the factory loom. If flicker continues afterwards, the ballast is the next item to test.

The EastSupplier Promise

Every unit is inspected before it leaves the warehouse, packed for international transit, and backed by a responsive support team. If a shipment arrives damaged or does not match the specification below, we replace it. Sourcing at scale should not require guesswork.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Ahmed S.
Works on my older truck

Lights are noticeably brighter and the dimming at idle is gone. Check your voltage before ordering, mine is 12V and it suited perfectly.

J
Jonas L.
First thing to test with flickering lights

Bought this after reading that voltage drop causes most flicker complaints. It was the fix. Cheap first test before replacing the ballast.

P
Paul N.
Plug and play as promised

No cutting into the factory loom at all. Both sides fitted in about twenty minutes and the switching is crisp on high and low beam.

V
Victor R.
Ended the flicker on my HID conversion

The bulbs used to dim for a second when I switched them on at idle. After fitting the harness pair they come up to full brightness in one step and the flicker is gone.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen