Descrizione
A key is no longer a piece of cut brass. It is a credential. Inside every modern fob sits a rolling code, a transponder handshake and an immobiliser challenge that has to be answered correctly in under a second, or the vehicle stays exactly where it is. The XTOOL X100 PADS was built for the person who has to answer that challenge on the customer's driveway, not in a laboratory.
The instrument itself is deliberately unglamorous: a sealed tablet, a wired OBD path, a physical key slot on the bench, and a database that knows the pin-code logic of thousands of vehicles across Europe, Asia and North America. It reads the vehicle, extracts what the immobiliser will allow, calculates what it will not, and writes a new key that the car accepts as its own. All-system diagnostics travel with it, so the same device that programs the fob can also tell you why the dashboard lit up.
What separates a professional key tool from a consumer gadget is not the menu. It is the tolerance for the moment when the vehicle refuses. The X100 PADS carries an offline pin-code calculator, guided all-key-lost procedures and a recovery path for interrupted writes, so a job that stalls halfway does not become an expensive tow. The 25 hardware configurations stocked here cover the regional bundles -- with or without the bench adapter, with different vehicle-brand licence coverage -- so a workshop buys the scope it actually needs instead of paying for territory it will never touch.
Credentials are not copied. They are earned, one handshake at a time.
What The Instrument Actually Does
- ✦All-systems diagnostic read and clear across engine, transmission, ABS, SRS, body and comfort modules
- ✦Immobiliser key programming for added keys, all-keys-lost states and smart-key replacement
- ✦Pin-code reading and offline pin calculation for vehicles whose servers no longer answer
- ✦Bench mode with dedicated key slot for modules that cannot be programmed in the car
- ✦Guided procedures with rollback prompts so an interrupted write can be recovered rather than abandoned
- ✦Regional licence bundles so coverage matches the vehicles actually rolling into the bay
- ✦Firmware and vehicle-database updates delivered over Wi-Fi without a PC bridge
Technical Specifications
- Function classAll-system diagnostics, immobiliser and key programming
- ConnectionWired OBD-II plus bench key-slot adapter
- CoverageEuropean, Asian and North American passenger vehicles and light commercial
- Key operationsAdd key, all keys lost, smart key, remote learning, pin read
- DisplayColour touchscreen tablet, standalone operation
- PowerInternal rechargeable battery with vehicle-supplied OBD power
- UpdatesOver-the-air firmware and vehicle database refresh
- Bench adapterIncluded on adapter-equipped configurations
- LanguageMulti-language interface, English default
- Configuration25 regional and licence variants stocked
Independent auto locksmiths use the X100 PADS as the second call after the mechanical key is cut: the customer has a blade, the vehicle still will not start, and the transponder has to be introduced. Mobile diagnostic technicians carry it instead of a laptop stack because the same unit that reads a fault code can produce the replacement credential on site. Used-car dealers run it at intake, verifying that every fob presented with a vehicle actually belongs to it before the car is listed. Fleet workshops keep one at the depot so a lost key does not take a van off the road for a week waiting on a dealer appointment.
Questions From The Bench
Q: Does it program keys on vehicles already listed as all-keys-lost?
Yes, that is the core use case. The all-keys-lost path works from the immobiliser state rather than from an existing working key, and the guided flow tells you which module has to be accessed and whether the job can be completed through the OBD port or requires the bench slot.
Q: Will it work without an internet connection?
Diagnostics and most immobiliser operations run offline. Pin calculation for vehicles whose manufacturer server access has lapsed is handled by the on-board calculator. Only database and firmware refresh needs a connection.
Q: What are the 25 configurations?
They are regional and licence bundles. Some include the bench key adapter, others assume you already own one; some carry wider brand coverage for a specific market. Choose the variant matching the vehicles you actually service rather than the largest bundle available.
Q: Can it do everything a dealer tool does?
It covers the same operations a dealer performs for key introduction, module reading and service resets. It will not perform online programming tasks that require a manufacturer account authorisation, and it does not pretend to.
Q: Is the tablet usable in a mobile van?
Yes. It runs standalone on internal battery with OBD-supplied power during the write, and the screen is bright enough for daylight work. No laptop tether is required for key operations.
Q: What happens if the vehicle loses power mid-write?
The guided procedure pauses and offers a recovery path rather than closing the session. Reconnect, allow the module to settle, and resume. Recovery support is the difference between a tool someone trusts and a tool someone is afraid of.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.