The Lumen Cube | 30W LED Off-Road Combo Beam Work Light Bar

Risparmia 20%
EastSupplier PlatformSKU:1005012131786636-6Pcs with wire Kit-United States-3000LM

Color: 6Pcs with wire Kit
Prezzo:
$454.54 $568.18

spese di spedizione calcolata al pagamento

Disponibilità:
Solo 10 pezzi rimasti

Descrizione

Darkness Is Not the Absence of Light. It Is the Absence of the Right Light. The Lumen Cube was engineered for the moment when a standard headlight beam ends and the unknown begins. At 30 watts of solid-state LED output, delivered through a hybrid spot-and-flood optical array, this work light creates two illumination zones from a single housing: a tight 15-degree center beam that punches 200 meters down the trail, and a 60-degree flood fill that sweeps the ditches, shoulders, and worksite periphery simultaneously. The beam pattern is not a compromise between reach and spread — it is both, layered, active at the same time. For the off-road driver navigating an unfamiliar trail at midnight, or the equipment operator positioning a backhoe under portable lighting, the difference between seeing the obstacle and guessing at it is the Lumen Cube.

The housing tells the story of where this light is meant to live. Die-cast aluminum — not stamped steel, not injection-molded plastic — forms a single-piece chassis with integrated passive convection fins running the full length of the body. The 30W thermal load dissipates without a fan, without moving parts, without anything that can seize or clog. The IP68 rating is not a marketing claim; it is a test certification for continuous submersion beyond 1 meter. When your vehicle punches through a river crossing and the light bar goes underwater at 15 miles per hour, the Lumen Cube does not flicker, does not fog, does not short. The double-gasketed lens seal and potted internal driver board are built for the worst conditions off-road driving and marine operation can deliver — then tested one level beyond that.

Mounting flexibility completes the engineering brief. The adjustable stainless steel side brackets allow 360-degree rotation and lock securely at any angle — roof rack, bull bar, brush guard, roll cage, or temporary scaffolding clamp. The wide voltage input (9V–32V DC) means a single Lumen Cube architecture works across your 12V Tacoma, your 24V Unimog, and your 24V site generator lighting array without voltage converters or rewiring. Available in four lengths from a compact 33-inch bar to a full-width 52-inch array, the sizing matrix lets you match the light to the vehicle proportionally — not the awkward one-size-fits-none approach of universal mounting kits. This is lighting engineered for the boundary between asphalt and the unlit world.

Headlights show you the road. The Lumen Cube shows you everything the road hides.


Key Features

✦ Dual-beam optical design combines a focused 15-degree spot core for long-distance throw with a 60-degree flood perimeter for wide-area peripheral illumination — no need to choose between reach and spread

✦ IP68 marine-grade waterproof rating means full dust protection and continuous submersion capability — built for river crossings, coastal salt spray, and pressure-washer cleaning without compromise

✦ Die-cast aluminum housing with powder-coated finish dissipates 30W of thermal load through passive convection fins — no fans to fail, no moving parts to jam, just physics doing the cooling

✦ Wide voltage compatibility (DC 9V–32V) covers 12V passenger vehicles, 24V commercial trucks, and heavy equipment — a single mounting architecture across your entire fleet

✦ Tempered glass lens resists gravel strikes at highway speed and thermal shock from rapid cooling after submersion — laboratory-tested to survive what trail debris throws at it

✦ Adjustable stainless steel side brackets enable 360-degree rotation and lock at any angle — mount on roof racks, bull bars, brush guards, or work-site scaffolding with the same bracket set


Technical Specifications

  • Light Type30W Cube LED — Spot + Flood Combo Beam
  • Color Temperature5500K Cool White (Daylight Equivalent)
  • Luminous FluxApprox. 3,000–3,600 Lumens
  • Beam PatternCombo — Spot (Center) + Flood (Wide Spread)
  • Housing MaterialDie-Cast Aluminum with Powder Coat
  • LensTempered Glass — Impact & Scratch Resistant
  • Waterproof RatingIP68 — Submersible, Marine-Grade
  • Operating VoltageDC 9V–32V (Wide Voltage Compatible)
  • MountingAdjustable Stainless Steel Side Bracket
  • Sizes Available33'', 39.5'', 46'', 52'' — Single Row Cube

Deployment Scenarios

The Lumen Cube is equally at home on a weekend overlanding rig, a commercial fishing vessel, a construction site light tower, or a farm tractor. Off-road enthusiasts mount it on roof racks and bull bars for trail visibility that factory high beams cannot approach. Marine operators use the IP68 rating to deck-mount lighting that survives salt spray and green-water boarding. Construction crews clamp temporary magnetic mounts to scaffolding for portable area lighting that runs off vehicle 12V power. Fleet managers standardize on a single light bar model across mixed-voltage vehicles (12V pickups, 24V dump trucks) and reduce spare parts inventory. The four-size range (33'' to 52'') covers everything from ATV/UTV compact applications to full-width truck and heavy equipment installations.


Frequently Asked Questions

Q: What is the difference between spot, flood, and combo beam patterns?

A: Spot beam concentrates light into a narrow 15-degree cone for maximum distance — ideal for highway driving and long-range trail visibility. Flood beam spreads light across a wide 60-degree field for close-range area illumination — perfect for campsite setup, worksite lighting, and slow-speed crawling. The combo pattern combines both: a central spot core reaching 200+ meters flanked by flood fill that lights up the ditches, trail shoulders, and peripheral zone simultaneously.

Q: Can I run this light bar on a 24V truck or heavy equipment?

A: Yes. The DC 9V–32V input range covers both 12V passenger vehicle systems and 24V commercial truck, agricultural, and construction equipment electrical systems. No voltage converter or ballast resistor is required — the internal driver handles the full range natively.

Q: How does the IP68 rating compare to IP67 or IP65?

A: IP68 is the highest practical waterproof rating for vehicle lighting. IP65 protects against low-pressure water jets. IP67 protects against temporary immersion (30 minutes at 1 meter). IP68 protects against continuous submersion beyond 1 meter depth — the exact depth and duration are manufacturer-specified. The Lumen Cube is tested at 2 meters for 60 minutes, which exceeds the requirements for any off-road or marine application short of deep submersion.

Q: Do I need a separate wiring harness?

A: The light bar includes a basic pigtail connector. For a complete plug-and-play installation, we recommend pairing it with a 12V/24V relay wiring harness (sold separately) that includes an in-line fuse, relay, and illuminated switch. This protects both the light bar and your vehicle's electrical system.

Q: What is the expected lifespan of the LEDs?

A: The CREE LED array is rated for 50,000+ operating hours to 70% luminous output (LM-80 standard). At 4 hours of nightly use, that translates to approximately 34 years of service life. The driver electronics and housing will outlast the vehicle they are mounted on. The most common failure point in LED light bars — moisture ingress through gasket degradation — is addressed by the IP68 double-sealed housing design.


Customer Reviews

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mike D.
Best worksite light I've used — running 24V on our truck fleet

We mounted these on three of our service trucks (24V systems) for nighttime jobsite illumination. The wide voltage compatibility meant no converters needed — direct wired into the existing auxiliary circuit. At 30W, they draw almost nothing from the alternator but throw enough light to work by at 30-40 feet. The powder coat is holding up after 2 months of gravel road dust and pressure washing. Ordered three more for the rest of the fleet.

T
Travis B.
River crossing tested — bone dry inside after full submersion

Mounted the 46-inch Lumen Cube on my Jeep's roof rack three weeks ago. First real test was a river crossing that put the light bar fully underwater for about 10 seconds — zero moisture inside the housing afterward, zero flickering during. The combo beam pattern is exactly what I wanted: tight center spot reaches way down the trail while the flood fills in the sides so I can see the ditch line. Build quality feels premium — the aluminum housing has real weight to it, not the tinny feel of cheaper bars.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen