Descrizione
The finished print was never the hard part. The hard part is the ritual that follows it: gloves, a sealed bath of solvent, a ventilated room, and a growing drum of alcohol that has to be labelled, stored and eventually disposed of. Post-processing has been the tax that resin printing charges for its detail.
Water-Wash Resin 2.0 is built to remove that tax. Hydrophilic materials make the uncured surface rinsable with water alone, so the wash station becomes a sink rather than a chemical store. The formula keeps its elongation rate at 16.62 percent, which is the property that decides whether a thin bracket, a miniature or a functional prototype survives its own brittleness, and it is engineered to resist yellowing so a pale print still looks like the object it was meant to be after weeks under light.
Precision is where it separates from the older generation. The resin resolves features at 0.15 mm compared with the 0.2 to 0.25 mm typical of conventional water-washable formulas, which is the margin on which miniature faces, interlocking parts and fine surface texture are decided. Odour is reduced in storage and during printing, viscosity is kept low enough to drain from hollows, and the 10 kg pack is sized for people who print in campaigns rather than in experiments.
Solvent was never the point. Detail was.
Why It Belongs On Your Bench
- Washes with water instead of alcohol-based solvent
- Elongation rate of 16.62 percent for toughness after curing
- Feature resolution down to 0.15 mm versus 0.2 to 0.25 mm for conventional water-washable resins
- Anti-yellowing formulation that holds colour over time
- Reduced odour during storage and printing
- Low viscosity for clean drainage from hollow sections
- Designed for LCD resin printers
- 10 kg pack size for high-volume printing
- Available in Gray, White, Black, HD Gray and Clear
- Water-Wash Resin 2.0 formulation by ANYCUBIC
Technical Specifications
- Brand: ANYCUBIC
- Product: Water-Washable Resin 2.0
- Form: Liquid
- Material: Photosensitive resin
- Printer compatibility: LCD resin printers
- Pack weight: 10 kg
- Colours: Gray, White, Black, HD Gray, Clear
- Elongation rate: 16.62 percent
- Feature precision: 0.15 mm
- Wash method: Water
- Yellowing resistance: Anti-yellowing formulation
- Odour: Reduced odour formula
- Viscosity: Low viscosity
- Origin: Mainland China
Where It Belongs
This resin is for the printer that runs nearly every day. In a workshop producing miniatures at volume, the cost of post-processing is measured in solvent, ventilation equipment, disposal and hours; a water-washable formula removes three of those four line items and returns the printer to production sooner. In a studio making jewellery masters, props or display models, the 0.15 mm resolution and anti-yellowing behaviour are what determine whether a clear or pale print can be handed to a client. In a school, makerspace or shared lab where a solvent bath is a safety question rather than a convenience, the rinse step moves to a sink, which is the difference between a policy that can be approved and one that cannot. Buyers who print in campaigns rather than continuously will find the 10 kg format cheaper per kilogram and worth storing.
Support That Answers
Every unit is checked before dispatch and shipped from the regional warehouse you select at checkout. Before purchase and after it, questions are answered by the same team that listed the product, not by a script.
Frequently Asked Questions
Q: Does water really replace the alcohol wash?
A: Yes for uncured resin removal. Hydrophilic materials in the formulation allow the residual resin on a print to be rinsed away with water, which removes the solvent bath from the process. Curing under UV light after washing is still required, exactly as with any resin.
Q: How much detail can it hold?
A: Feature precision is rated at 0.15 mm, against the 0.2 to 0.25 mm typical of conventional water-washable resins. That difference is most visible on miniature faces, engraved texture and parts that must fit together.
Q: Will thin parts survive handling?
A: Elongation is rated at 16.62 percent, which gives the cured part more tolerance before it cracks. Thin brackets, small gears and articulated pieces are the shapes that benefit most, though over-exposed parts remain brittle in any resin.
Q: Do the colours behave differently?
A: Clear and HD Gray are chosen for detail visibility and light transmission, while Black and Gray hide layer lines on display pieces and White suits painting. All colours share the same wash and precision characteristics.
Q: Is the smell still a problem?
A: The formula reduces odour both during storage and during printing compared with earlier water-washable resins. Ventilation and gloves remain good practice with any resin, and the rinse step no longer requires an open alcohol container.
Q: What comes in the 10 kg option?
A: The 10 kg pack is supplied in the colour selected at checkout. For anyone printing in batches rather than occasionally, buying at this weight is the lower cost per kilogram.
Q: Which printers does it suit?
A: It is designed for LCD resin printers, including the ANYCUBIC Photon family, and works with the standard workflow of print, water rinse and UV cure.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.