Descrizione
Heat is easy to make and hard to control. Anyone can lower a coil into a tank; the real question is whether the wattage arrives where you aimed it, at the density your process expects, without corroding the vessel you are heating. The Immersion Coil is a 2-inch tri-clamp element built in SUS304 stainless with an 8 mm tube, made for kettles, mash tuns, stills and water tanks that need to be heated the same way every single run.
Match the element to the vessel, not the other way round. Output is offered at 3 kW, 3,750 W, 4.5 kW, 6 kW and 9 kW, each paired with its own heated length: 190 mm, 210 mm, 230 mm, 250 mm and 290 mm respectively. Kit configuration is your choice as well, with heater-only, heater with clamp, and heater with a full clamp set, so a home brewery and a small distillery can each order the version that fits the plumbing already installed.
Built for the brewery and distillery bench, where sanitation is the argument. SUS304 wetted surfaces resist the corrosion that shortens the life of generic elements. A 2-inch tri-clamp flange (64 mm) with a 51 mm thread diameter reduces installation to a gasket and a clamp, which means the element can be pulled for cleaning between runs instead of being soaked in place. The package includes the element, a bakelite cap and a waterproof ring, with a silicone gasket included, and the declared watt tolerance of -10% to +5% follows international standards.
*Choose the wattage properly, and the tank is simply arithmetic.*
Key Features
- ✦ SUS304 stainless steel construction for wetted heating surfaces
- ✦ 2-inch tri-clamp flange (64 mm) with a 51 mm thread diameter
- ✦ Five power options: 3 kW, 3,750 W, 4.5 kW, 6 kW and 9 kW
- ✦ Matched heated lengths from 190 mm to 290 mm
- ✦ Runs on 220 V or 380 V supply
- ✦ Three kit configurations: heater only, with clamp, or with full clamp set
- ✦ Watt tolerance of -10% to +5% in line with international standards
- ✦ Simple structure and good mechanical strength for repeated removal and cleaning
- ✦ Package includes bakelite cap and waterproof ring, with a silicone gasket as a gift
Technical Specifications
- Brand: AIICIOO
- Type: Electric immersion tubular heating element
- Model: 2-inch tri-clamp
- Material: SUS304 stainless steel
- Tube Diameter: 8 mm
- Flange: 2-inch tri-clamp, 64 mm
- Thread Diameter: 51 mm
- Voltage: 220 V / 380 V
- Wattage Options: 3 kW, 3,750 W, 4.5 kW, 6 kW, 9 kW
- Matched Coil Lengths: 3 kW - 190 mm, 3,750 W - 210 mm, 4.5 kW - 230 mm, 6 kW - 250 mm, 9 kW - 290 mm
- Kit Options: Heater only, heater with clamp, heater with clamp set
- Watt Tolerance: -10% to +5% per international standards
- Package Contents: 1 x heater element, 1 x bakelite cap, 1 x waterproof ring, silicone gasket included
- Typical Applications: Moonshine and distillation stills, brewing kettles, water tanks
Where It Belongs
This element belongs where liquid has to reach temperature on a schedule. Small distilleries and home stills use it as the primary heat source in the boiler, where the tri-clamp flange makes cleaning between runs a matter of minutes rather than hours. Breweries use it in hot liquor tanks and mash vessels, and the 220 V / 380 V options let the same element family serve a single-phase workshop and a three-phase production floor. Water tanks, parts washers and food processing vessels use the SUS304 wetted construction where corrosion resistance is non-negotiable. Choose the wattage and coil length pair that matches your vessel volume and your available circuit, and choose the kit configuration that matches the clamp hardware you already own.
Frequently Asked Questions
Q: What is the element made of?
A: The wetted heating surfaces are SUS304 stainless steel with an 8 mm tube, a 2-inch tri-clamp flange measuring 64 mm and a 51 mm thread diameter.
Q: Which voltage do I need?
A: The element is available for 220 V or 380 V supplies. Use 220 V where only a single-phase supply is available, and 380 V where three-phase power is installed.
Q: How do wattage and length relate?
A: Each power rating is paired with a coil length: 3 kW with 190 mm, 3,750 W with 210 mm, 4.5 kW with 230 mm, 6 kW with 250 mm and 9 kW with 290 mm. Longer coils spread the same watt density over more surface, which is gentler on the liquid.
Q: Can I use it for brewing and distillation?
A: Yes. The listing is built for that use, and the stainless construction is chosen for vessels where the heated liquid is destined for consumption.
Q: What is included with the element?
A: One heater element, one bakelite cap and one waterproof ring. A silicone gasket is included as a gift, and you can order the element alone, with a clamp, or with a full clamp set.
Q: Does the element have to stay submerged?
A: Yes. An immersion element should remain covered by liquid whenever it is energised, so the coil does not overheat the surrounding air.
Q: Who should install it?
A: The mechanical fit is simple: flange, gasket and clamp. The mains connection should be made by a qualified electrician and matched to your supply, with the circuit rated for the wattage you select.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.