Descrizione
Lift a vehicle and you quietly break the geometry that keeps it pointing forward.
The front track bar is the link that locates the axle laterally. In a stock Jeep it sits almost level, and the axle stays centred under the frame through the whole suspension arc. Add three inches of lift and the bar swings down at one end: the axle shifts sideways, the steering wheel drifts off centre, and the two front wheels stop sharing the same track. Owners feel it as a truck that wanders on the highway and hunts for its line in a crosswind.
This bar is adjustable for exactly that reason. The working range is 31.73 inches at full extension down to 30.28 inches collapsed, which lets the installer re-centre the axle at ride height instead of accepting whatever the lift produced. It is carbon steel, spray-finished in blue, with a tubular design and CNC-machined ends for fitment, and it fits Jeep Wrangler TJ from 1997 to 2006 and Cherokee XJ from 1984 to 2001 across the common 1.5 to 4.5 inch lift range.
It is also the first component to inspect when a Jeep develops death wobble, because a worn or misadjusted track bar turns every bump into a lateral input that the steering cannot damp.
A lifted truck should not feel like a suggestion. Geometry first, then everything else.
What the Adjustment Buys You
- ✦Collapsed to extended range of 30.28 to 31.73 inches, enough to re-centre the axle across a 1.5 to 4.5 inch lift.
- ✦Carbon steel tubular construction with CNC-machined ends for accurate, repeatable fitment.
- ✦Restores axle centring, which is what stops the off-centre steering wheel and the wander that follows a lift.
- ✦Removes the lateral play that feeds death wobble, the oscillation that starts with one bump and ends with a stopped vehicle.
- ✦Allows fitment of plus-sized tyres without the axle sitting visibly offset in the wheel arches.
- ✦Blue powder-coat style spray finish over treated steel for rust resistance on salted winter roads.
- ✦Direct replacement for the front track bar on TJ and XJ, using factory mounting points.
Technical Specifications
- Fitment: Jeep Wrangler TJ 1997-2006; Jeep Cherokee XJ 1984-2001
- Position: Front
- Adjustable range: 30.28 in (min) to 31.73 in (max)
- Lift range: 1.5 to 4.5 inches
- Material: Carbon steel, tubular
- Finish: Blue spray finish over treated steel
- Weight: 4.56 kg
- Package dimensions: 105 x 13 x 9 cm
- Construction: CNC-machined ends, welded tube
- Included: 1 x adjustable front track bar
- Note: Not for right-hand-drive vehicles
The Symptoms It Fixes, and the Builds It Suits
The clearest sign you need one is visible from the front: after a lift, one front tyre sits closer to the flare than the other, and the steering wheel sits off centre while driving straight. Owners also report vague on-centre feel, wandering at highway speed, and a front end that reacts to every seam in the road.
It suits the weekend build on 2 to 3 inches of lift where the owner wants the geometry correct without a long-arm conversion, and the trail rig on 4 to 4.5 inches that still drives to the trailhead. Workshops fitting lifts use it as the standard correction rather than selling a fixed-length bar and hoping.
Fitment Questions Owners Actually Ask
Will this fix death wobble on its own?
Sometimes, if a worn or incorrectly adjusted track bar is the only fault. Death wobble usually has several contributors: worn track bar bushings, a tired steering damper, loose tie rod ends, incorrect caster, unbalanced tyres. The track bar is the first item to check because it is the lateral locator, but replacing it will not mask a second worn component.
Do I need an alignment after fitting?
Yes. Centring the axle changes the relationship between the steering box and the wheels, so the steering wheel should be re-centred and the toe checked afterwards. Budget for an alignment as part of the job.
What lift does this cover exactly?
1.5 to 4.5 inches is the practical envelope. Above that, the angles at the frame mount become the limiting factor and a different bracket or a long-arm setup is the correct answer.
Is it compatible with right-hand-drive vehicles?
No. The manufacturer states it is not for right-hand-drive applications. Fit it to left-hand-drive TJ and XJ only.
How do I set the length correctly?
Fit it at ride height with the vehicle on the ground and the steering centred, then adjust until the axle is centred under the frame, measured from a fixed point on each side to the frame rail. Torque the jam nut and re-check after a hundred miles, because new components settle.
Can I install it with hand tools?
Yes. It is a bolt-on replacement at factory mounting points. Penetrating oil on the old hardware the night before is the difference between a forty-minute job and a fight with a seized bolt.





The EastSupplier Promise
Every unit is inspected before it leaves the warehouse, packed against transit damage, and backed by a 30-day return window. If a specification on this page does not match what arrives, we replace it. Questions before you order go to a human, not a bot.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.
