Descrizione
A cordless tool is only as capable as the battery that feeds it. The motor, the chuck, the gear train — all of it idles in silence when the voltage dips. The Volt Reserve is not a commodity replacement cell. It is an energy architecture designed to keep professionals working through the afternoon without reaching for the charger.
At 15000mAh with a 388VF peak rating, this lithium-ion pack delivers sustained torque through heavy repetitive tasks — deck screws, lag bolts, hole saws through studs — where standard 2000mAh packs fade after the first hour. The multi-cell protection circuit monitors individual cell voltage, temperature, and charge balance, preventing the cascading failures that turn a dead battery into a dead project. This is the difference between a battery you swap out and a battery you forget about until the job is done.
Whether you are framing a basement, assembling flat-pack furniture for a client, or running a cordless impact wrench in a tire shop, the Volt Reserve ensures your tool's rated specifications are actually available when you need them. Because a drill that bogs down on the last screw of the day is not a drill problem. It is an energy problem.
Power is not about peak numbers. It is about area under the curve.
Key Features
- ✦ 15000mAh High Capacity — 3–5× the runtime of standard 2000–4000mAh packs for all-day operation
- ✦ 388VF Peak Output — Sustained voltage delivery under load for consistent motor performance
- ✦ Lithium-Ion Cell Architecture — No memory effect, low self-discharge, and stable voltage curve
- ✦ Multi-Cell Protection Circuit — Overcharge, over-discharge, over-current, and thermal protection per cell
- ✦ Broad Tool Compatibility — Fits 18V cordless drills, brushless wrenches, and power tool platforms
- ✦ LED Charge Indicator — On-board status display for quick power checks between tasks
- ✦ Durable ABS Housing — Impact-resistant shell with rubber over-mold for jobsite survivability
Technical Specifications
- Voltage: 18V nominal
- Peak Voltage Rating: 388VF
- Capacity: 15000mAh
- Cell Type: Lithium-ion (Li-ion)
- Protection Circuit: Overcharge, over-discharge, over-current, thermal cutoff
- Housing Material: ABS with rubber over-mold
- LED Indicator: Multi-segment charge status display
- Charging Time: Approximately 3–5 hours with compatible 18V charger
- Operating Temperature: -20°C to 60°C (discharge), 0°C to 45°C (charge)
- Compatible Tools: 18V cordless drills, impact drivers, brushless wrenches, circular saws
Application Scenarios
The Volt Reserve is the battery that professional contractors, renovation crews, and serious DIY builders reach for when a charger is not nearby. Framing carpenters running cordless circular saws and impact drivers through an eight-hour shift keep two Volt Reserves in rotation — one on the tool, one charging — and rarely touch a third. Automotive technicians using cordless impact wrenches for tire rotations appreciate the sustained torque that smaller packs cannot deliver past the first bay. Homeowners assembling decking or fencing over a weekend find that a single charge covers the entire project without the mid-afternoon interruption that kills momentum. Wherever cordless tools meet extended runtime demands, the Volt Reserve eliminates the battery anxiety that forces professionals to carry spare packs they should not need.
Frequently Asked Questions
Q: Will this battery fit my existing 18V drill?
A: This battery uses the standard slide-on interface common to many 18V tool platforms. However, brand-specific locking mechanisms vary — please verify the battery-to-tool interface dimensions against your drill or wrench before ordering. The slide rail and contact pin layout should physically match your tool's battery receiver.
Q: What does 388VF mean?
A: VF (Voltage Full) refers to the peak open-circuit voltage of the fully charged battery pack. The nominal operating voltage is 18V. The 388VF rating indicates the maximum voltage the pack can deliver at full charge before settling into its nominal 18V operating range under load. This is common labeling practice for high-capacity lithium-ion tool batteries.
Q: How many charge cycles can I expect?
A: The lithium-ion cells are rated for approximately 500–800 full charge-discharge cycles before capacity degrades to 80% of the original rating. In practice, partial discharge cycles (topping up between tasks) extend the effective lifespan significantly. Avoid deep-discharging the pack to zero — lithium-ion cells last longest when kept between 20% and 80% state of charge.
Q: Does this battery have a memory effect like old NiCad cells?
A: No. Lithium-ion chemistry has no memory effect. You can charge the pack at any state of discharge without conditioning or fully draining it first. The protection circuit handles cell balancing automatically during charging.
Q: Is the 15000mAh capacity real?
A: The 15000mAh rating represents the total energy capacity of the parallel cell configuration at the nominal voltage. In real-world use, runtime varies with the tool's current draw — a drill under heavy load draws more current and depletes faster than an LED work light. Expect approximately 3× the runtime of a standard 5000mAh pack under comparable load conditions.
Customer Reviews
Pagamento e Sicurezza
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.