Descrizione
A Print Fails Long Before It Peels. It Fails in the Vat. Resin is the least discussed and most decisive variable in resin printing. Two machines with identical light engines will produce different parts because the photopolymer differs in viscosity, cure speed, and how much it shrinks as it locks into shape. The Resin Vault is built around ABS-Like Resin V2, a 405nm formulation engineered for the two problems that actually stop production: brittleness that turns functional parts into glass, and cleanup that turns a ten minute print into an hour of solvent work.
The chemistry is straightforward and it is the reason this format works. Exposure at 405nm cures the layer predictably, so fine features hold their edge instead of blooming under overexposure. The cured material behaves like ABS under load, which means clips flex, threaded bosses hold torque, and thin walls survive a drop onto concrete. Water washability removes the isopropyl supply chain from your workflow entirely: the part goes into water, the uncured film releases, and the model is ready for post-cure without a solvent bath, a ventilation hood, or a bin of contaminated alcohol accumulating in the corner of the shop.
At three kilograms per container, this is a production quantity rather than a sample. A single bottle carries a full plate run of miniatures, a batch of functional brackets, or a week of iteration on an enclosure that refuses to fit. Viscosity stays workable across the session, which matters because the last third of a large bottle should print exactly like the first. The formulation is also low odor relative to standard resins, a detail that changes whether the printer lives in the workshop or gets exiled to the garage.
Material is not a consumable line item. It is the specification your part actually inherits.
Why It Earns Its Place
- ✦ Water-washable formulation, no isopropyl alcohol required
- ✦ ABS-like mechanical behavior: flex, impact resistance, and torque holding
- ✦ 405nm UV cure optimized for LCD and DLP light engines
- ✦ High dimensional accuracy for fine features and small text
- ✦ Low odor relative to conventional photopolymer resins
- ✦ 3kg production container for sustained plate runs
- ✦ Stable viscosity across the full bottle for consistent results
Technical Specifications
- Material: ABS-Like photopolymer resin, V2 formulation
- Wavelength: 405nm UV
- Net Weight: 3kg per container
- Wash Method: Water-washable, no IPA required
- Mechanical Character: ABS-like flex and impact resistance
- Compatibility: LCD and DLP resin printers, including 8K panels
- Viscosity: Low to moderate, stable across the bottle
- Odor: Reduced versus standard photopolymer resin
- Post-Processing: Water rinse followed by UV post-cure
- Storage: Sealed, opaque container, ambient temperature
Where It Belongs
This is the resin for shops that print parts which have to survive being used. Functional brackets, jigs, and fixtures where a brittle part means a reprint and a missed deadline. Miniature painters who want detail without fragility at the ankles and weapon shafts. Product designers running enclosure iterations where five versions a week is normal and solvent costs are a line item. Dental and jewelry-adjacent studios doing model work that needs clean surfaces straight out of the wash. The three kilogram format is aimed specifically at anyone who has finished a one kilogram bottle mid-project and lost an afternoon to reordering.
Questions, Answered
Q: Do I really not need isopropyl alcohol?
Correct. The formulation releases uncured resin into water, so a rinse in a wash station or a container of tap water replaces the alcohol bath. Use the water responsibly: cure the residue under UV before disposal.
Q: Will ABS-Like resin fit my printer?
It cures at 405nm, which covers the overwhelming majority of LCD and DLP resin printers on the market today, including high resolution 8K panels. Exposure settings should be calibrated per machine.
Q: How strong is ABS-like compared to actual ABS?
It mimics ABS behavior in flex and impact rather than matching it exactly. Parts flex before they fracture, which is the property that matters for clips, brackets, and snap fits.
Q: What is the shelf life of a 3kg container?
Stored sealed and away from light at room temperature, the resin stays usable for many months. Keep the cap closed between sessions and filter the vat back into the bottle after long pauses.
Q: Is the odor manageable indoors?
It is noticeably milder than standard resins, but resin printing still warrants ventilation. Treat airflow as standard practice rather than something this formulation lets you skip.
Q: Can I mix it with other resins?
Mixing is possible but changes the mechanical result unpredictably. Use it as supplied when you need the ABS-like behavior to be repeatable.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.