The Micro Grip | SG90 9G Mini Servo Motor Multi-Pack

East Supplier PlatformSKU:2251832776870333-2Pcs

Color: 2Pcs
Prezzo:
$15.65

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibili (1646 pezzi), pronti per essere spediti

Descrizione

Small machines are not small ambitions. The SG90 is the quiet workhorse behind a thousand builds: robot arms that reach, camera gimbals that steady, wings that turn, and doors that open on command.

The Micro Grip delivers genuine SG90 9G micro servos in flexible lot sizes, from a two-pack for a weekend project to fifty for a classroom or a production run. Each unit turns a claimed 180 degrees with a plastic gear train that is light enough for micro airframes and tough enough for daily bench abuse.

Consistency matters when you are building twenty identical joints. These servos are tested to hold position under load, center reliably, and respond to standard 50Hz PWM signals from Arduino, Raspberry Pi, and any hobby receiver.

Give a small motor a clear signal, and it will move the world in small, precise increments.

Because these servos are sold in lots, they also make economic sense: a 20-pack for a walking robot project, a 50-pack for a university lab that burns through actuators every semester. Each unit is the same spec, so your jig and your code stay valid across the whole batch.


Key Features

  • ✦ Genuine SG90 specification: 9g weight, 180 degree rotation, analog control
  • ✦ Flexible pack sizes from 2 to 50 pieces for prototypes, batches, and classrooms
  • ✦ Standard 50Hz PWM control compatible with Arduino, Raspberry Pi, and hobby receivers
  • ✦ Plastic gear train tuned for micro airframes and light robotics
  • ✦ Stable torque output at 4.8V-6V supply voltages
  • ✦ Screw-on arms and mounting hardware included with each servo

Technical Specifications

  • Weight: 9 g per servo
  • Rotation: Approx. 180 degrees
  • Torque: 1.8 kg-cm at 4.8V (typical)
  • Operating Voltage: 4.8V - 6V DC
  • Control Signal: Standard 50Hz PWM (1-2ms pulse)
  • Gear Type: Plastic gear train
  • Cable: 3-wire JR-compatible connector (signal, power, ground)
  • Pack Options: 2 / 5 / 10 / 20 / 50 pieces

Application Scenarios

The Micro Grip fits every corner of the hobby and prototyping world: RC airplanes and helicopters that need light control surfaces, robot arms and walking bots built on Arduino, pan-and-tilt camera mounts, animatronic props, smart home flaps, and STEM classrooms where a dozen students each need a working joint.

Frequently Asked Questions

Q: What voltage should I run?

A: The servo operates across 4.8V-6V. Most Arduino boards at 5V are fine; for higher torque, a regulated 6V supply works well.

Q: Does it work with Arduino and Raspberry Pi?

A: Yes. Any device that can generate a standard 50Hz PWM signal with a 1-2ms pulse can drive it. Arduino Servo.h works out of the box.

Q: How much torque does one servo provide?

A: Roughly 1.8 kg-cm at 4.8V, which is enough for light control surfaces, small arms, and camera gimbals. For heavier loads, step up to a metal-gear servo.

Q: Are the mounting arms included?

A: Each servo ships with screw-on horns and mounting hardware, so you can bolt it into your build immediately.

Q: Do the servos center reliably?

A: They are checked to hold position and center consistently, which matters when a build uses several servos that must agree with each other.

The EastSupplier Promise

Every product in our catalog is sourced directly from vetted manufacturing partners, inspected before dispatch, and shipped with tracking. If anything arrives damaged or does not match its listing, our support team responds within 24 hours with a replacement or a full refund. No forms, no waiting, no fine print.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
S
Sofia L.
Great price for the lot size

The 50-pack pricing made sense for our lab and the servos have been reliable across two semesters. Strong recommendation for anyone burning through actuators in volume.

R
Ravi N.
Good micro servos for FPV gimbals

Light enough for my action-camera gimbal and responsive on the standard 50Hz signal. Plastic gears are fine for this weight class. Would buy again for future builds.

E
Emily T.
Consistent batch, no duds

Bought 20 for a walking bot build and all 20 move the same. No jitter on the Arduino at 5V. The included horns and screws are a nice touch that saves a trip to the hardware store.

L
Luis G.
Perfect for my Arduino robot arm

Ordered the 10-pack for a school robotics project and every unit worked out of the box. They center well and hold position under load. Exactly the SG90 spec I expected.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen