The Meridian Guard | Tempered Glass Lens Protector for Insta360 X4

EastSupplier PlatformSKU:1005007817145137-2pcs Protective Lens-China Mainland

Colour: 2pcs Protective Lens
Prezzo:
$36.18

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibile

Descrizione

A panoramic camera is two lenses maintaining a fiction. Each one captures a little more than half the sphere, and the stitching engine hides the seam where they meet. That fiction depends on both lenses being optically identical, which is why a scratch on one of them is not a blemish. It is a stitching failure. The damaged side produces different refraction, the seam stops resolving cleanly, and every frame from that point carries the defect into post.

The Meridian Guard is a tempered glass protector moulded 1:1 from the X4 lens geometry, with an unobstructed lens edge so the protector does not intrude on the field of view where the two halves are stitched. That edge design is the difference between a protector that disappears into the footage and one that leaves a black crescent in every panorama. The glass is high-strength tempered, sized to absorb the contact that would otherwise reach the lens element underneath.

Fitting uses the camera's own lens lock structure, so installation is a push and a twist with no adhesive and no alignment guesswork. The pair weighs 9.5 grams each at 35 mm across, light enough that the camera's balance is unchanged. Removal is equally quick, which matters when you need to swap to a clean set mid-shoot rather than stop and clean a lens in the field.

The economics are simple once you consider what is being protected. An X4 lens is a sealed optical assembly at the centre of a camera whose entire value proposition is that both elements match. A guard is a consumable; the lens is not. Fitting protection before the first scratch costs a fraction of what the repair would, and replacement afterwards is a swap rather than a service centre visit. That asymmetry, not the glass itself, is the actual product: it converts a permanent risk into a recurring small cost, which is the only kind of risk a working camera can afford to carry.

A scratched panoramic lens does not ruin a photograph. It ruins every photograph after it.


Key Features

  • ✦Tempered glass protection moulded 1:1 from the Insta360 X4 lens geometry
  • ✦Unobstructed lens edge that prevents black edges in stitched panoramas
  • ✦Push-and-twist fitment using the camera's own lens lock structure
  • ✦Anti-scratch surface that absorbs contact before the lens element does
  • ✦Sold as a matched pair covering both front and rear lenses
  • ✦9.5 g per guard, 35 mm diameter, with no effect on camera balance
  • ✦Supplied with dry and wet cleaning wipes and fitting instructions

Technical Specifications

  • MaterialABS frame with tempered glass
  • CompatibilityInsta360 X4
  • Package quantity2 protective lenses
  • Weight per guard9.5 g
  • Single guard dimensions35.0 x 35.0 x 12.0 mm
  • Packaging weight42 g
  • Fitting methodPush and twist on the X4 lens lock
  • Included accessories2 dry and wet alcohol wipes, 2 instruction sheets
  • Edge designUnobstructed lens edge for seamless stitching
  • TypeLens protector kit

Where It Belongs

Action shooters who mount an X4 to a helmet, bar or chest rig know the camera will meet something hard eventually, and a guard turns that contact into a replaceable cost. Travel creators use the pair to keep a spare set ready so a dirty lens never ends a shooting day. Motorcycle and cycling riders fit them because road grit at speed reaches the lens before any filter would. Anyone shooting 360 footage for stitching-heavy delivery benefits most, since the unobstructed edge keeps the seam clean rather than trading protection for a permanent artefact in frame.


Questions, Answered

Q: Will the protector show in my 360 footage?

The lens edge is deliberately unobstructed so the protector does not intrude on the field of view where the two halves are stitched. That design is what keeps black edges out of the panorama.

Q: How does it attach?

It uses the X4's own lens lock structure. Press the guard into place and twist to lock, with no adhesive involved.

Q: Does it cover both lenses?

The kit contains two guards, one for the front element and one for the rear, so both halves of the panoramic pair are protected.

Q: Does the added weight affect the camera?

Each guard weighs 9.5 grams. At that mass the balance of the camera on a mount is unchanged.

Q: What happens if the guard gets scratched?

The tempered glass takes the damage instead of the lens element, and a guard is replaceable where a lens is not. Swap in a clean set and keep shooting.

Q: What is in the box?

Two tempered glass protective lenses, two dry and wet alcohol cleaning bags, and two instruction sheets.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
X
Xanthe S.
Push and twist, done in seconds

No adhesive and no alignment guesswork. Uses the camera lens lock so it seats the same way every time. 9.5 grams each, balance is unchanged on a chest rig.

U
Ulric N.
Saved a lens on a bar mount

Took a knock against a rock garden and the glass cracked instead of the lens. Replaced the guard and kept shooting. Cheap insurance for an expensive camera.

T
Tamsin D.
No black edges in the stitch

The unobstructed lens edge is the reason this works. I had tried a generic protector and it left a visible seam in every panorama. This one disappears from the footage entirely.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen