Descrizione
Inventory Is Not A Spreadsheet. It Is A Promise. Every count that is wrong becomes a cancelled order, a refund, or a customer who stops believing the number on the page. The failure almost never happens in the software. It happens at the shelf, at the loading bay, at the market stall, in the ten seconds when someone has to put down a phone, find a cable, wake a laptop and type a twelve-digit SKU by hand. The Ledger exists to collapse that ten seconds into one squeeze of a trigger.
The clip is the whole idea. It clamps to the back of an iPhone, an iPad, a Surface Go or an Android tablet, so the screen stays in front of you and the scanner rides behind it. No second device, no lanyard, no scanner sitting in a pocket while you juggle a carton. The CMOS sensor reads both 1D and 2D symbologies at up to one hundred scans per second, which covers UPC and EAN retail codes, ISBN for books, PDF417 on driver licences and shipping labels, Data Matrix on small industrial parts, and QR codes on anything modern. Three physical scan buttons are placed so that left-handed and right-handed operators both reach one without relearning their grip.
Underneath it is built like equipment rather than an accessory. A 3000 mAh cell runs a full shift of intermittent scanning with a battery-level indicator that tells you before the last hour rather than after it, and a separate physical power switch cuts the drain when the device is idle in a bag. Pairing is Bluetooth to the host device, but the USB-C port is bidirectional: it carries data in HID mode when you want a wired connection, and it charges when the battery is low. Two upload modes matter more than they look. Instant mode types each scan straight into the active field. Storage mode keeps thousands of codes inside the scanner and flushes them when you reconnect, which is the difference between counting an entire stockroom and counting it twice.
Accuracy is not a feature you notice. It is the absence of everything you would otherwise have to fix.
Key Features
- ✦ Back-clip mounting: attaches to the rear of phones and tablets so the screen stays visible and both hands stay free.
- ✦ 1D and 2D capture: reads UPC, EAN, ISBN, Code 128, PDF417, Data Matrix and QR at up to 100 scans per second.
- ✦ 3000 mAh battery: full-shift capacity with an on-body level indicator and a separate power switch to stop idle drain.
- ✦ USB-C, both directions: wired HID data transfer and fast charging from the same port.
- ✦ Instant or storage mode: stream scans live, or buffer thousands of codes offline and upload on reconnect.
- ✦ Three scan buttons: positioned for left and right hand so no operator has to adapt their grip.
- ✦ Configurable feedback: sound and vibration alerts can each be switched on or off independently.
Technical Specifications
- Models: EY-017 (2D, phone), EY-036 (2D, tablet), EY-017L (1D, phone)
- Scan engine: CMOS, 600 dpi optical resolution
- Scan rate: up to 100 scans per second
- Colour depth: 32 bit
- Symbologies: 1D and 2D including UPC, EAN, ISBN, Code 128, PDF417, Data Matrix, QR
- Wireless: Bluetooth to iOS, iPadOS and Android hosts
- Wired interface: USB-C, USB-HID data plus charging
- Battery: 3000 mAh rechargeable, with level indicator
- Phone fit: 5.7 to 7 inch screens, clipped horizontally
- Tablet fit: shortest side 5.7 to 7.1 inch
- Light source: natural light plus LED fill
- Certification: CE
Where It Earns Its Place
The pattern that repeats across every adoption of this device is a paper process that has run out of room. A retail back room counting a delivery against a packing slip. A small warehouse doing cycle counts on a tablet because there is no WMS and no budget for one. A market stall or pop-up where the till is an iPad and the stock list is a shared spreadsheet. A pharmacy or clinic reconciling boxes at intake. A field service van where parts are logged as they come off the shelf and the alternative to scanning is remembering. Library and bookshop intake is another common fit, since the sensor reads ISBNs and price-add-on codes in the same pass. Because the mount is a clip rather than a cradle, the same unit moves between a phone on Monday and a tablet at the counter on Tuesday without buying anything new, which is usually the point at which a scanner stops being a nice idea and starts being infrastructure.
Frequently Asked Questions
Q: Will it work with an iPhone or iPad?
A: Yes. It pairs over Bluetooth and behaves as a keyboard input, so scans land in whatever field is active, including Notes, Excel, Google Sheets and most inventory apps. Phones with screens from 5.7 to 7 inches can be clipped; tablets need a shortest side between 5.7 and 7.1 inches. Clip horizontally only, as vertical mounting can damage the clamp.
Q: Can it scan without a live connection?
A: Yes. In storage mode the scanner holds codes internally and uploads them when the host reconnects, which is what makes it usable in a stockroom with no signal, a basement, or a cold-store aisle where the tablet drops out. Instant mode, by contrast, needs the link live because each scan is typed immediately.
Q: What is the difference between the EY-017 and EY-036 variants?
A: Both are 2D-capable. EY-017 is shaped for phones in the 5.7 to 7 inch range. EY-036 is the tablet build, sized for iPads and Surface-class devices. The EY-017L is a 1D-only unit for phone mounting, priced lower for users who only ever scan linear retail barcodes.
Q: Does it read PDF417 and Data Matrix, not just QR?
A: Yes. 2D models decode PDF417 as used on ID cards and freight labels, Data Matrix as used on electronics and pharmaceutical packaging, and standard QR. This matters if your intake process touches shipping documents or regulated goods, where 1D-only scanners simply cannot participate.
Q: How long does the battery actually last?
A: A 3000 mAh cell carries a typical shift of intermittent scanning. Continuous scanning at full rate will drain it faster, as will leaving Bluetooth paired with the screen awake. The level indicator and the physical power switch both exist so you can see the remaining charge and stop the sink when the device is not in use.
Q: Can I use it as a wired scanner?
A: Yes. Connect over USB-C and it operates in USB-HID mode, sending scan data over the cable while it charges. Many users run it wirelessly through the day and wire it to a fixed workstation for evening reconciliation.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.