Descrizione
Filament is the one consumable that decides whether a printer looks well tuned or badly built, and the variable is almost never the machine. It is diameter consistency. A spool that drifts half a tenth of a millimeter either way changes the extrusion bead on every layer, and the part that looked perfect in the slicer preview comes out with banding you cannot sand away. Geeetech's standard PLA holds the wire to 1.75 mm plus or minus 0.03 mm, spooled at 1 kg net, and that tolerance is the entire reason to buy a named material instead of the cheapest listing on the page.
The polymer side is straightforward and honest. PLA, no additives of concern, biodegradable in an industrial stream, low shrinkage so tall parts do not peel off the bed, and enough rigidity that brackets and jigs behave like the engineering plastic they are meant to be. Print temperature sits between 185 and 210 degrees Celsius with the bed at 20 to 60, and speed between 50 and 100 mm per second. On an unheated bed you will need glue stick or a PEI sheet, which the specification says plainly rather than pretending otherwise. Vacuum-sealed spool, desiccant inside, and a 1.4 kg shipping weight that tells you the reel itself is substantial rather than a cardboard core with a promise.
The catalog depth is what makes this a supply decision rather than a one-off purchase. Twenty-six option combinations cover color and warehouse, from black, white and gray through red, orange and purple, so a shop can standardize on one material SKU across a product line and reorder the same shade six months later. Filament that changes shade between batches forces you to re-print a whole run, and that cost dwarfs the few dollars saved on a no-name spool.
Consistent diameter is invisible in the finished part until the day it is missing.
What the Tolerance Buys You
- ✦ 1.75 mm diameter held to plus or minus 0.03 mm, so extrusion width stays predictable across a spool.
- ✦ 1 kg net weight on a rigid reel, roughly 330 meters of usable filament.
- ✦ Low shrinkage PLA that holds tall thin geometry without corner lift on a textured bed.
- ✦ Bright, evenly pigmented color that reads the same from batch to batch.
- ✦ Vacuum-sealed with desiccant, so the first print behaves like the last one.
- ✦ Print window of 185 to 210 C with bed at 20 to 60 C and speed 50 to 100 mm/s.
- ✦ Twenty-six color and warehouse combinations, so one material standard covers a product line.
Technical Specifications
- Material PLA
- Diameter 1.75 mm, tolerance plus or minus 0.03 mm
- Net Weight 1 kg with spool
- Shipping Weight About 1.4 kg
- Print Temperature 185 to 210 C
- Bed Temperature 20 to 60 C, glue needed on unheated beds
- Print Speed 50 to 100 mm/s
- Shrinkage Low
- Spool Rigid reel, vacuum sealed with desiccant
- Options 26 color and warehouse combinations
Where a Standard PLA Earns Its Keep
Functional prints are the clearest case: brackets, jigs, cable guides, enclosure lids and replacement knobs where dimensional accuracy matters more than surface gloss. Classrooms and makerspaces benefit from the tolerance because a spool that behaves predictably removes one variable from a lesson where twenty students are learning on the same machine. Small production shops use PLA for fixtures and packaging inserts that never see heat, and prototypes for client review print in a neutral gray or black so the geometry is what the client judges. Hobbyists printing terrain, props and models get the color range without paying for specialty materials, and anyone running a farm of printers will appreciate that one SKU covers every machine on the shelf.
Practical Questions
Q. Will 1.75 mm work in my printer?
The overwhelming majority of FDM machines sold in the last decade are 1.75 mm. Check the hotend and extruder specification; a 3 mm machine is a different, much less common standard.
Q. Do I need a heated bed?
Not strictly, but you need adhesion. The specification calls for glue on an unheated bed. A heated bed at 50 to 60 C with a PEI sheet is the more reliable setup for larger footprints.
Q. Why does diameter tolerance matter so much?
Flow is calculated from diameter. A wire that swells and thins forces the extruder to over- and under-deliver material, and the visible result is banding, inconsistent walls and fragile layer bonding.
Q. Is this the same as the silk PLA in the description of some listings?
No. Silk PLA is a separate formulation with a different print window, typically 200 to 230 C and 30 to 60 mm/s. This listing is standard PLA and should be sliced as standard PLA.
Q. How should I store a partly used spool?
Sealed with desiccant. PLA absorbs moisture slowly, and wet filament shows up as steam pops, rough surfaces and weak parts long before the spool looks wrong.
Q. Can I print at high speed on a modern printer?
The rated window is 50 to 100 mm/s. Faster profiles exist for tuned machines, but the honest starting point is that the material is specified for a hundred millimeters per second, and pushing past it changes the finish before it changes anything else.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.
