The Bedrock Surgeon | 16-Inch 4000W Industrial Concrete Saw

East Supplier PlatformSKU:1005008188077253-220V EU-US-United States

Color: 220V EU
Prezzo:
$608.31

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibile

Descrizione

Concrete does not yield to hesitation. It demands force, precision, and the unflinching will to cut through what was poured to last a century. The Bedrock Surgeon is not a tool you pick up — it is a declaration that you have work to do, and you intend to finish it before the dust settles.

Powered by a 4000-watt industrial-grade motor spinning a 16-inch blade, this cutter transforms masonry, brick, and reinforced concrete into manageable geometry. Every design decision — from the oversized ergonomic grip to the integrated water-feed dust suppression system — serves a single truth: fatigue is the enemy of accuracy, and accuracy is the only acceptable standard when you are one degree off a load-bearing wall.

The Bedrock Surgeon belongs to the contractor who has seen lesser saws stall mid-cut, the renovator who measures twice because the first time was a decade ago, and the builder who understands that the difference between a clean edge and a cracked slab is measured in RPM and bearing quality. This is not a weekend warrior's toy. It is production-grade infrastructure wearing the profile of a handheld machine.

Some cuts divide material. This one divides professionals from everyone else.


Key Features

  • 4000W Pure Copper Motor — Sustained torque output for continuous cutting through reinforced concrete and masonry without thermal throttling
  • 16-Inch Diamond Blade Compatibility — Deep-cut geometry for wall slotting, chase cutting, and floor channel work
  • Wet/Dry Cutting System — Integrated water feed port suppresses silica dust at the source, extending blade life and protecting respiratory health
  • 360-Degree Rotatable Guard — Single-tool adjustment for any cutting angle; protects operator without obstructing sight lines
  • Overload Protection Circuit — Auto-shutoff when blade binds or motor temperature exceeds safe threshold; resets without fuse replacement
  • Double-Insulated Housing — Reinforced polymer chassis rated for job-site abuse; sealed against masonry dust ingress

Technical Specifications

  • Motor Power: 4000W (rated), 4800W (peak)
  • Blade Diameter: 16 inches (400mm)
  • Maximum Cutting Depth: 5.5 inches (140mm)
  • No-Load Speed: 5,000 RPM
  • Voltage: 110V / 220V (dual-voltage compatible)
  • Weight: Approximately 25 lbs (11.3 kg)
  • Water Feed Connection: Standard garden hose adapter
  • Blade Arbor: 1 inch (25.4mm)
  • Cutting Applications: Concrete, reinforced concrete, brick, stone, cinder block, asphalt
  • Certification: CE, RoHS

Application Scenarios

This saw is purpose-built for professional contractors, structural renovation crews, and industrial maintenance teams. Common deployment scenarios include: cutting expansion joints in concrete slabs, creating electrical and plumbing chases in masonry walls, sectioning reinforced concrete for demolition access, trimming brick and block to fit irregular openings, and cutting cooling channels in industrial flooring. It is equally at home on a foundation pour as it is resizing precast panels at a prefab yard. The dual-voltage compatibility makes it viable on both North American and international job sites without a step-down transformer.

Frequently Asked Questions

Q: Can this saw cut through rebar embedded in concrete?

A: Yes — the 4000W motor paired with a suitable diamond blade can cut through #4 (1/2-inch) and #5 (5/8-inch) rebar encountered during reinforced concrete cutting. For heavier rebar grids, select a blade rated for steel-reinforced concrete and maintain steady feed pressure. The overload protection circuit will activate if the motor encounters binding, protecting both the saw and the operator.

Q: Is the water feed mandatory or can I cut dry?

A: The saw supports both wet and dry cutting. Wet cutting is strongly recommended for reinforced concrete and extended cutting sessions — it suppresses silica dust, extends blade life by 40-60%, and keeps the motor running cooler. Dry cutting is acceptable for short, shallow cuts in non-reinforced masonry when water access is unavailable. Always use respiratory protection during dry operation.

Q: What maintenance does the motor require?

A: The pure copper motor is sealed and brushless — no carbon brush replacement is needed. After each use, blow compressed air through the ventilation slots to clear accumulated masonry dust. Check the blade arbor nut for tightness before each session. The water feed line should be flushed with clean water after use to prevent mineral buildup.

Q: Does it come with a blade?

A: The saw is sold as the power unit only. Diamond blades are purchased separately to allow you to select the correct blade grade for your specific material — concrete, asphalt, brick, or reinforced concrete. The 1-inch arbor accepts standard 16-inch diamond blades from major manufacturers including Makita, Husqvarna, and Norton.

Q: How does the dual-voltage work?

A: The motor is internally wound for both 110V and 220V operation. A voltage selector switch on the motor housing lets you toggle between input voltages. No external transformer is required. Simply match the switch position to your local mains supply before plugging in.

Q: What is the warranty period?

A: The motor and housing carry a 12-month manufacturer warranty against defects in materials and workmanship. Consumable components (blades, water seals, carbon brushes if applicable) are excluded. Register your product within 30 days of purchase for warranty activation.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Javier S.
Best value in this power class

Compared to rental units that cost $150/day, this pays for itself in 4 jobs. The 360° guard adjustment means I can cut overhead without getting showered in debris. Motor runs cool even in 90°F weather. Five stars, no hesitation.

D
Dominic K.
Professional grade, exactly what I needed

Bought this for a basement renovation where I had to cut floor channels for plumbing. The 16-inch blade depth meant I could do it in one pass instead of two. Dust suppression actually works when you hook up a garden hose. Overload protection kicked in once when I hit rebar — reset and kept going. Solid build.

E
Elena R.
Great power, blade mount could be smoother

4000W motor is no joke — went through a 6-inch reinforced slab like butter. Only complaint is swapping blades requires a bit more wrench clearance than I'd like. The dual voltage switch is a lifesaver on mixed job sites. Would buy again.

M
Marcus T.
Finally a saw that doesn't quit mid-cut

Rented several concrete saws over the years and they all thermal-throttle after 20 minutes of heavy use. This thing ran for two hours straight cutting foundation channels and never blinked. The water feed is well-designed — dust was almost zero. Worth every dollar for a contractor who bills by the hour.

Pagamento e Sicurezza

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

Potrebbe piacerti anche

Visto di recente