Descrizione
A Seal Is a Promise the Package Has to Keep. Between the filling line and the courier there is a moment where a bag either holds or fails, and almost every failure traces back to heat applied unevenly or not at all. A hand-held impulse sealer can close a bag; it cannot close two hundred of them in an hour with the same result on the last one as the first. That difference, consistency at volume, is the entire reason a continuous band sealer exists.
This is a horizontal band machine built around a 600W heating block and a Teflon conveyor. The block reaches temperatures from ambient up to 300 degrees Celsius, the belt carries the bag past it at a steady rate, and the seal is set by speed rather than by how long someone holds a lever. Sealing width is adjustable from 6 to 12 mm and the machine accepts single film from 0.02 to 0.8 mm, which covers PE, kraft paper, aluminium foil laminate and the plastic films most small producers actually buy. A 15 mm Teflon belt with 23 threads carries the bag without sticking to the seam, and the cooling fan behind the block keeps the cycle stable instead of letting heat creep upward through a long run.
Throughput is adjustable from zero to roughly 16 metres per minute, which is slow enough for a hand-fed bench and fast enough for a small production line. An embossing wheel prints a date or batch number directly into the seam, so traceability does not require a separate label step. Carbon steel frame, CE marked, three variants by plug region. It is a machine for a workshop that has outgrown sealing bags on a table, not a factory line with pneumatic automation.
Consistency is not a virtue in packaging. It is the specification.
Why This Configuration Works
- 600W heating block — reaches 300 degrees and holds it through a long run
- Speed set seal quality — seal is determined by belt speed, not operator timing
- 6 to 12 mm seal width — adjustable to the bag and the product inside it
- 0.02 to 0.8 mm film range — PE, kraft, foil laminate and standard plastic films
- 23-thread Teflon belt — 15 mm carrier that releases cleanly from a hot seam
- Date and batch embossing — printed into the seam, no separate label needed
- Continuous cooling fan — keeps the block stable during continuous operation
Technical Specifications
- Type — Horizontal continuous band sealer
- Power — 600W
- Temperature range — 0 to 300 degrees Celsius, 32 to 572 Fahrenheit
- Sealing width — 6 to 12 mm, 0.24 to 0.47 inch
- Single film thickness — 0.02 to 0.8 mm, 0.0008 to 0.03 inch
- Sealing length — Up to 20 cm bag width
- Conveyor speed — 0 to 16 m per minute, 0 to 52.5 ft per minute
- Teflon belt — 15 mm wide, 23 thread
- Frame material — Carbon steel
- Certification — CE
Where it belongs
This machine is for the producer who has moved past sealing bags with a hand tool: a coffee roaster packing 250 g and 1 kg bags, a spice or tea blender running short batches with printed dates, a soap or candle workshop using kraft and foil laminate, a small co-packer handling several film types in a week. It sits on a bench at working height with the bag hand-fed from the left, which keeps the operator's hands away from the heating block. It is not a vacuum sealer and not an automatic filling line; the value here is a repeatable seam at a pace one person can sustain, with date coding built into the same pass.
Questions Buyers Ask Before Ordering
Q: Does it vacuum seal?
A: No. This is a band sealer, not a vacuum machine. It produces a continuous heat seal and an embossed date mark; if you need air removal, a chamber vacuum sealer is a separate piece of equipment.
Q: What bags can it seal?
A: PE bags, kraft paper bags, aluminium foil laminate and standard plastic films between 0.02 and 0.8 mm single thickness. Coated or very thick multi-layer laminates should be tested on a sample before a production run.
Q: How is the seal temperature controlled?
A: Through the heating block setting, with the final result set by belt speed. Faster belt, less heat transferred; slower belt, more. Dial the pair in on scrap film before running product.
Q: Can it print a date?
A: Yes. An embossing wheel marks a date or batch number into the seam as it passes, so the package is traceable without a separate label or ink cartridge.
Q: Is it suitable for continuous production?
A: For hand-fed batch production, yes. The cooling fan keeps the block stable through long runs. It is not designed for pneumatic inline integration with an automatic filler.
Q: What is the maximum bag width?
A: Sealing length is rated up to 20 cm. Wider bags can be sealed in more than one pass, but the seam will show a join.
Q: Which plug version do I need?
A: Three variants are stocked for Czech Republic, Poland and United States power. Choose the one matching the socket at the machine's location, not where the order is placed.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.