The Case Study | Sapphire Crystal Watch Case for NH35 and ETA 2824

Economisez 20%
EastSupplier PlatformSKU: 1005008928329770-Glass Back A-36MM Case NH35 NH36-China Mainland

Color: Glass Back A
Prix:
$113.96 $142.45

Frais de port calculés au paiement

Stock:
En stock

Description

Every movement deserves a room worthy of it. A watch case is not a shell; it is architecture, and architecture is judged by what it refuses to compromise. This one is machined from solid 316L stainless steel, the alloy chosen by dive-watch makers for its resistance to salt and sweat, and it is closed with a screw-in crown rather than a push-pull stem, which is the difference between a watch that survives a shower and one that survives a decade.

The crystal is sapphire, offered with or without a cyclops loupe depending on whether you want the date magnified. Water resistance is rated to 100 metres. Dial seating is sized for 28.5 mm to 29 mm faces, the standard for the builds most people actually assemble: Seiko NH34, NH35, NH36 and NH38, ETA 2824, and the PT5000 clone that has become the default for budget builds. Lug to lug runs 45 mm on the 36 mm case and 48 mm on the 40 mm case, both with a 20 mm strap width, so the case wears as a dress watch on a leather strap and as a field watch on nylon.

The choice that matters most is the case back. A solid back keeps the build lean and hides the movement; a glass back turns the watch over and makes the rotor the point. Neither is more correct, but the decision changes what the watch is for. Both are 12 mm thick on the 36 mm case and 13 mm on the 40 mm, which keeps the profile under a shirt cuff without looking thin.

A movement tells time. A case decides whether anyone believes it.


Key Features

  • ✦Solid 316L stainless steel case, machined rather than cast
  • ✦Sapphire crystal, available with or without a cyclops date loupe
  • ✦Screw-in crown for genuine 100 metre water resistance
  • ✦Fits Seiko NH34, NH35, NH36, NH38, ETA 2824 and PT5000 movements
  • ✦Two case diameters: 36 mm at 12 mm thick and 40 mm at 13 mm thick
  • ✦Optional glass or solid case back, so the display is your decision
  • ✦20 mm strap width with 45 mm or 48 mm lug to lug for balanced wear

Technical Specifications

  • Case Material: Solid 316L stainless steel
  • Crystal: Sapphire, with or without cyclops
  • Case Diameter: 36 mm or 40 mm, crown excluded
  • Case Thickness: 12 mm (36 mm case), 13 mm (40 mm case)
  • Lug to Lug: 45 mm (36 mm case), 48 mm (40 mm case)
  • Strap Width: 20 mm
  • Dial Fit: 28.5 mm to 29 mm
  • Movement Fit: NH34, NH35, NH36, NH38, ETA 2824, PT5000
  • Water Resistance: 100 m with screw-in crown
  • Case Back: Glass display or solid steel, selectable

Where It Fits

This case is for the person who has already bought the movement and is now deciding what the watch will be. It suits a first build where the goal is a clean 36 mm dress watch on a stitched leather strap, and it suits a fourth build where the point is a glass back and a rotor worth looking at. Watchmakers use it for customer repairs where the original case is scored or corroded, because a 316L replacement restores water resistance without replacing the whole watch. Because both diameters share the 20 mm strap width, a single strap collection covers every configuration.

Frequently Asked Questions

Q: Will this case fit my NH35 movement?

A: Yes. The dial seat is cut for 28.5 mm to 29 mm dials, which is the standard fit for NH34, NH35, NH36 and NH38, as well as ETA 2824 and PT5000. If your dial falls outside that range, the case is not the right one.

Q: What is the difference between the glass back and the solid back?

A: A glass back shows the movement and the rotor, which matters on a build where the movement is the point. A solid back is thinner in appearance, quieter, and slightly more robust. Both are rated to the same water resistance.

Q: Do I need the cyclops version?

A: Only if your dial has a date window you want magnified. Without a cyclops the crystal is completely flat, which most minimal builds prefer because it keeps reflections even across the face.

Q: Is it really 100 metre water resistant?

A: The rating assumes the screw-in crown is fully seated and the case back is correctly torqued. That is why the crown is threaded rather than push-pull, and why the case back is a screw type.

Q: What strap size do I need?

A: 20 mm. Both the 36 mm and the 40 mm case use a 20 mm lug width, so any 20 mm strap will fit either build.

Q: Is this a complete watch?

A: No. This is the case, crystal, crown and case back. The movement, dial, hands and strap are supplied separately, which is what allows the case to be used across several builds.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Devin P.
Good case, plan your dial first

Quality is well above what I expected at this price, the 316L has a clean brushed finish. Marked down one star only because the crystal options are easy to get wrong if you order before checking whether your dial has a date window.

A
Alaric J.
Glass back, sapphire crystal, no cyclops

Went with the glass back so the rotor is visible and the flat crystal without the loupe. The dial seat took a 28.6 mm face without shimming. Water resistance held after a proper torque on the back.

T
Tomasz W.
The 36 mm is the one

Built an NH35 into the 36 mm with the solid back and a stitched leather strap. Thickness is honest at 12 mm, it slips under a cuff, and the screw-down crown feels machined rather than cast. Lug holes lined up first try.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen