Description
SPECIFICATIONS
App name: Tuya Smart, Smart Life
Measure range: 0.2-80A
Voltage: 100-240V
Ambient Temperature Range: -10 - 50 degree
Wireless Frequency: WiFi 2.4Ghz, not support 5Ghz
Channel Option: 1 or 2 Channels
Direction: Bidirectional 2 Way
Brand Name: MatSee Plus
Compatibility: All Compatible
Camera Equipped: No
State of Assembly: Ready-to-Go
Communication method: WI-FI
Origin: Mainland China
Certification: CE
Certification: RoHS
Choice: yes
semi_Choice: yes
NEW ARRIVAL Tuya WIFI Smart Dual Channel Energy Meter with 2 Clamp 80A - Available to Do Calibrate
1 Channel and 2 Channel is Available
Please note If you buy 1 Channel meter, please just only connect one channel wire of A or B, and leave the other one unconnected anyting.
2 Channels For Reverse and Forward direction
1 Channle or 2 Channels are available to Choose
And you can read from App for each Channel
- Real-time total power of 2 channels of reverse and forward direction
- Power for Channel A and B Separately(W)
- Current(mA)
- Voltage(V),
- Power factor, and Frequency(Hz)
Electricity Statistic for each channel in Forward and Reverse direction.
Hourly Elec. (KWh)
Daily Elec. (KWh),
Monthly Elec. (KWh)
-Yearly Elec. (KWh)
Technical data:
Rated Voltage:100-240V AC 50/60Hz
Measurable Current Range: 0.2A-80A
WiFi Frequency: 2.4GHZ (Not Support 5Ghz)
Ambient Temperature Range:-10°C ~ 55°C
App can display Channel A and B Real-time power, current, voltage, power factor and frequency for Forward and Reverse direction clrealy
The meter allows to do calibration
Allow to Do Calibration
The device is able to do calibration by adjusting the percentage
Electricity Statistic Channel A , B Separately and Total daily monthly, yearly Reverse and Forward Direction
Automation , It allows to make a Scene for this device working with other tuya devices
Set Automation for the Measured Device ,
For example, If Power or Current Is over the Value, then other tuya device starts to work .
Wiring Diagram
1. To measure the power 'from Grid' and 'To Grid'
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.
2. Measure the power consumption.
Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module.
Non-connect to Be Safe, Easy and Safe to Install
No need to change the wires, Just put the wire into the clamp, then it can measure, very easy.
Small Size Module , Easy to Install
We guarantee good quality, every product will be tested before delivery. Not before Order
Q&A
Q : After I configure it with App , why App shows 'shutdown' ?
A : Only if you put a device's wire (either live wire or neutral wire, not both) in the clamp, and turn on the device, then the clamp can sense the current, and App will show it is working
Q : I suppose P= U*I, why the value shows on App is not correct ?
A : Please consider the cos(Φ).
Because As resistances do not produce any phasor difference (phase shift) between voltage and current waveforms, all the useful power is delivered directly to the resistance and converted to heat, light and work. Then the power consumed by a resistance is real power which is fundamentally the circuits average power.
To find the corresponding value of the real power the rms voltage and current values are multiplied by the cosine of the phase angle, Φ as shown.
Real Power P = I2R = V*I*cos(Φ) Watts, (W)
Customer Service
We always response fast, if you have any question, please leave message online, or send email to sophie@matseeplus.com
Thanks.
Best Regards
Paiement et sécurité
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.