Description
Every entrance tells a story. For the Audi owner, the story begins before the hand touches the handle, in the strip of light that pools on the pavement when the door swings open. The Threshold Beam turns that first second into a signature, projecting a crisp, high-definition emblem onto the ground in pure white light that holds its edge even on rough asphalt.
These projector lamps drop into the factory door-light housing with a direct fit for Audi S-Line models, including the S3, S4, and S7. The HD lens produces a sharp, distortion-free image rather than the soft glow of cheap LED chips, and the sealed body shrugs off rain, puddles, and car-wash spray. At night the effect is genuinely premium, the kind of detail that makes a car feel finished.
Installation is a plug-and-play swap. Pop out the existing lamp, connect the new unit, and press it home. The polarity-safe connector removes the guesswork, and the LED draw is low enough to leave the battery untouched. Park in the garage, step out, and watch the ground light up with the badge of a car that was never meant to arrive unnoticed.
Beyond the visual signature, the lamps earn their place in the practical details of ownership. The sealed housing keeps moisture out of the door card, where a fogged factory lamp can leave rust trails and corroded connectors. The LED source lasts for years without the dimming that signals the end of an incandescent bulb, so the welcome light stays as crisp on the thousandth night as it was on the first. It is the rare upgrade that improves both the impression and the longevity of the car.
The driveway, narrated in light.
Key Features
- ✦ HD projection with sharp, distortion-free image
- ✦ Direct fit for Audi S-Line S3, S4, S7 door housings
- ✦ Sealed, IP-rated body for rain and car-wash duty
- ✦ Plug-and-play, polarity-safe installation
- ✦ Low LED power draw, battery-friendly
- ✦ Crisp white light that holds its edge on asphalt
- ✦ Premium finishing detail for the entrance moment
Technical Specifications
- Compatibility: Audi S-Line S3, S4, S7 door light housings
- Light Source: High-brightness LED with HD lens
- Projection: Emblem image projected on ground
- Water Resistance: Sealed for rain and car-wash spray
- Installation: Plug-and-play, direct replacement
- Polarity: Safe connector, no wiring changes
- Power Draw: Low consumption LED
- Set Contents: 2 projector lamps
- Operating Voltage: 12V vehicle system
- Warranty: 30-day quality guarantee
Application Scenarios
The Threshold Beam is made for the moments a car is most noticed: arriving at a restaurant valet, pulling into a parking garage, walking away at dusk and glancing back. It suits the enthusiast who details on weekends, the executive who parks in the same spot every evening and likes the ground to say goodnight, and the owner preparing a show-worthy example for a meet. The sealed housing also earns its keep in wet climates, where cheap lamps fog within a season and these keep projecting.
Practical owners will find the lamps useful beyond the aesthetic. The projected image makes the door zone visible at night, which helps passengers step out safely in unlit driveways and parking lots, and gives a clear visual cue of the door's swing path. Families with children appreciate the bright marker on the ground when loading car seats after dark. With both front doors equipped, every exit becomes a small ceremony, and every arrival announces itself the way the marque intends.
Frequently Asked Questions
Q: Will these fit my Audi model?
A: They are designed for the door light housings of the Audi S-Line S3, S4, and S7. Check that your factory lamp has the same housing shape before ordering.
Q: Do I need to rewire anything?
A: No. The units plug into the existing connector with a polarity-safe design, so there is no cutting or splicing.
Q: Are they waterproof?
A: The housing is sealed against rain and car-wash spray. Like any door lamp, avoid submerging them.
Q: How bright is the projection?
A: The HD lens produces a crisp, bright image that remains visible on light concrete and asphalt at night.
Q: Do they drain the battery?
A: No. The LED draw is minimal and the lamps operate only while the door is open, exactly like the factory units.
Q: Do the rear doors need a different part?
A: This listing covers the front door housings. Rear doors on some models use a different lamp shape, so confirm your housings before ordering.
Q: How long do the LEDs last?
A: The LED source is rated for years of normal use and does not dim the way incandescent bulbs do, so the projection stays crisp.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.