Description
Wet filament is a silent failure. It does not announce itself. It shows up as stringing across a print that was flawless yesterday, as layer adhesion that snaps along the grain, as a matte surface where you ordered gloss. A single afternoon of humid air is enough to move a spool out of tolerance, and the failure is always blamed on settings. The Dry Vault exists to remove the variable entirely: active heated drying that runs while the printer runs, so the filament is conditioned at the moment it is extruded rather than the day it was opened.
Color is a language, and four is a conversation. A single spool makes an object. Four loaded spools make a decision. This module holds four filament positions and feeds them on demand, so a single print can carry four distinct colors with no manual swap, no pause, no seam where you stopped to intervene. Link two units and the same logic scales to eight. Each bay identifies what is loaded into it automatically, and the architecture was co-developed with the Multi-Color Institute, which matters more than it sounds - multi-material feeding fails not at the extruder but in the buffer, the tension and the timing between bays.
A run that never stops is worth more than a run that is fast. Commercial parts are rarely lost to speed. They are lost at the twelve hour mark when a spool runs dry and the machine keeps moving through empty air. The Dry Vault watches spool weight and switches to a backup position the moment a spool is exhausted, continuing the print without an operator standing by. It mounts beside the printer as a modular unit, communicates with the printer firmware, and works with the Anycubic Kobra S1, Kobra 3 and Kobra 3 MAX.
Drying, feeding and color are not three features. They are one system, and the system is the point.
Key Features
- ✦ Four filament positions per unit, expandable to eight with two linked units
- ✦ Active heated drying that runs during the print, not before it
- ✦ Automatic filament identification in each bay
- ✦ Automatic backup feeding - switches to a spare spool when one runs out
- ✦ Multi-color printing with no manual spool swaps and no stops
- ✦ Co-developed with the Multi-Color Institute for buffer and tension control
- ✦ Modular mounting beside the printer, built for the Kobra S1, Kobra 3 and Kobra 3 MAX
Technical Specifications
- Item Type: Multi-color filament management and drying module
- Printer Compatibility: Anycubic Kobra S1, Kobra 3, Kobra 3 MAX
- Filament Positions: 4 per unit; 8 with two units linked
- Drying System: Active heated drying during printing
- Filament Identification: Automatic detection per bay
- Backup Feeding: Automatic switch to a backup spool on run-out
- Print Modes: Single color, four-color, multi-color, backup
- Filament: Standard 1.75 mm spools
- Mounting: Modular, sits beside the printer
- Control: Integrated with printer firmware and slicing workflow
Where It Belongs
The Dry Vault is for anyone whose prints are sold, delivered or depended upon. Print farms use it to run unattended overnight - the backup feeder is what allows a machine to finish a job after a spool empties, which is the difference between a paid part and a wasted night. Product studios use the four-color capacity to print branded enclosures, signage and prototypes with real color separation instead of post-paint. Cosplay and prop makers use it because color changes stop being an event. Educators and workshop leads use it because a single module removes the two failure modes students hit first: wet filament and running out mid-print. If your climate is humid for any part of the year, this is not an accessory. It is the part of the machine that protects every other part.
Frequently Asked Questions
Q: Which printers does this work with?
The Anycubic Kobra S1, Kobra 3 and Kobra 3 MAX. It mounts as a modular unit beside the printer and communicates with the printer firmware.
Q: How many colors can I print in one job?
Four with a single unit. Link two units together and the same print can draw from eight filament positions.
Q: Does it dry filament, or just store it?
It dries actively, and it does so during the print. Heat is applied while filament is fed, so material is conditioned at the point of extrusion rather than dried once and then re-exposed to ambient air.
Q: What happens when a spool runs out mid-print?
That is the backup function. The module detects the exhausted spool and switches to a backup position, and the print continues without an operator present.
Q: Do I have to swap spools manually for color changes?
No. Loaded bays are selected in the slicing workflow. The module feeds the requested position on command, so color changes happen inside the print with no pause and no seam.
Q: Does it identify filament automatically?
Yes. Each bay detects what is loaded, so the module knows filament type and color per position without manual entry in every job.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.