Description
High frequencies carry the detail that makes music feel alive: the brush of a cymbal, the breath before a note, the air around a vocal. The Treble Forge is a 2-inch tweeter driver built to reproduce that upper register with the clarity your speaker build deserves. Designed as a drop-in upgrade for two-way and three-way systems, it pairs a dual-magnet motor with a robust metal frame for controlled, musical treble.
Rated at 8 ohms with 30W power handling and an input range of 25 to 49W, this driver integrates cleanly with common crossover topologies. The dual-magnet construction increases magnetic flux in the gap, which translates to higher sensitivity and firmer transient response, the qualities that separate a tweeter that renders detail from one that merely makes noise. The metal housing also acts as a heat sink, keeping the voice coil cool during sustained listening sessions.
Whether you are restoring a vintage cabinet, upgrading a bookshelf pair, or building a custom three-way design, the Treble Forge gives you a coherent, articulate top end without the boutique price tag. CE certification and consistent production tolerances mean every unit performs like the one next to it.
Treble is not an afterthought. It is the first thing your ear believes.
Key Features
- ✦ 2-inch tweeter driver with dual-magnet motor structure
- ✦ 8 Ohm impedance, 30W power handling for flexible system design
- ✦ Metal frame and housing for rigidity and heat dissipation
- ✦ Clean upper-register reproduction for two-way and three-way systems
- ✦ CE-certified production with consistent build tolerances
- ✦ Suitable for home audio, car audio upgrades, and DIY speaker builds
- ✦ Pair pack for matched left/right channel performance
Technical Specifications
- Type: 2-inch Tweeter (Treble Driver)
- Impedance: 8 Ohm
- Power Handling: 30W (system input range 25-49W)
- Magnet Structure: Dual Magnetic
- Frame Material: Metal
- Crossover Design: Suitable for three-way and two-way systems
- Certification: CE
- Use: Home audio, car audio, DIY speaker cabinets
- Quantity: 2 pieces per order
- Connection: Standard solder terminals for crossover wiring
Application Scenarios
The Treble Forge earns its place in any system where the top end matters. Restore a pair of vintage loudspeakers whose original tweeters have aged out of spec, upgrade a factory two-way car speaker set for cleaner highs, or include it in a custom DIY build where you control the crossover yourself. Because it ships as a matched pair, stereo imaging stays consistent, and the 8 Ohm rating keeps amplifier loading predictable.
For DIY enthusiasts, the solder terminals make the Treble Forge easy to integrate into a new crossover build, while its modest mounting depth fits shallow baffles found in many bookshelf cabinets. In car audio, a pair of these drivers can replace tired factory tweeters behind the factory grilles, lifting the perceived soundstage without visible modification. With a pair in hand, you can also A/B test capacitor and resistor values in the crossover to tune the treble response to your room or cabin.
Frequently Asked Questions
Q: Will this tweeter work with my existing crossover?
A: If your crossover is designed for an 8 Ohm tweeter in the 25-49W range, yes. Verify the crossover frequency and impedance match before wiring.
Q: Are both tweeters included?
A: Yes, the order includes 2 pieces so you can match the left and right channels.
Q: Can I use these in a car audio build?
A: Absolutely. The metal frame and 8 Ohm impedance suit component sets and aftermarket door builds where space is tight.
Q: What is the advantage of the dual-magnet design?
A: The dual-magnet motor increases magnetic flux, improving sensitivity and transient response for cleaner, more articulate high frequencies.
Q: How do I wire the terminals?
A: The tweeter uses standard solder terminals. Connect the positive lead through the crossover high-pass leg and the negative lead to the common ground.
Q: What crossover frequency should I use?
A: For a 2-inch tweeter in this power class, a crossover point around 3,000 to 4,000 Hz with a 12dB/octave slope is a safe starting point for most two-way designs.
Q: Do the tweeters need a resistor or padding network?
A: Only if your build requires level matching with the woofer. Many builders add an L-pad to tune the treble level to taste, but the driver itself needs no compensation network.
Q: Are these compatible with 4 Ohm systems?
A: These drivers are 8 Ohm. If your system is designed around a 4 Ohm tweeter, you would need to adjust the crossover or add an impedance-matching network.
Q: How do I protect the tweeter from over-powering?
A: Keep the amplifier output within the rated 25-49W system range and let the crossover filter low frequencies. Running a tweeter without a high-pass crossover is the fastest way to damage any driver.
The EastSupplier Promise
- Sourced for reliability: every unit is inspected before dispatch, so what arrives matches what we promised.
- Real inventory, real stock: our catalog reflects live warehouse counts, with same-week dispatch on in-stock lines.
- Responsive support: a dedicated team answers fitment, specification, and order questions within one business day.
- Protected purchase: 30-day returns on unused items and a clear resolution path on every order.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.