Description
Every Print Begins As A Decision About Material. Geometry is the part of 3D printing everyone talks about, and material is the part that decides whether the geometry survives. Marble PLA exists for the finish: a stone-like surface that hides layer lines the way real stone hides tooling marks, so a vase or an architectural model reads as cast rather than extruded. The Marble Quarry is that finish delivered in a high-speed formulation, because a marble texture is worth very little if producing it takes three times as long as printing in plain grey.
High-speed PLA is not ordinary PLA printed faster. The melt flow has to be modified so the polymer can be laid down at rates up to 600mm/s without under-extrusion at the nozzle or poor layer adhesion behind it. Tolerance is held to plus or minus 0.02mm across a 1.75mm diameter, which is the number that matters on a Bowden-fed printer where a single oval cross-section shows up as inconsistent extrusion three layers later. Each 1kg spool carries roughly 330 metres of filament, wound neatly so it feeds without the tangles that turn a long print into a failed one at hour nine.
The 5.5kg bundle format is the practical detail. Filament is consumed in tens of kilos by anyone printing seriously, and ordering single spools means paying shipping repeatedly and risking a colour mismatch between batches mid-project. Five and a half kilos in a single order, with the marble tone consistent across the set, is the difference between a material you test with and a material you standardise on.
Stone does not need to be quarried. It needs to be specified.
Key Features
- ✦ Marble-effect PLA with a stone surface that softens visible layer lines
- ✦ High-speed formulation stable up to 600mm/s with no under-extrusion
- ✦ 1.75mm diameter held to +/-0.02mm for consistent extrusion on Bowden setups
- ✦ Low shrinkage, so large flat parts stay flat without a heated enclosure
- ✦ Vacuum-sealed, neatly wound spools — 100% bubble-free extrusion
- ✦ Roughly 330 metres per 1kg spool, 1.1kg net and 1.35kg gross
- ✦ RoHS and REACH compliant, eco-friendly formulation
Technical Specifications
- Material: PLA, marble effect (HS-PLA MB)
- Diameter: 1.75mm, tolerance +/-0.02mm
- Print Speed: Up to 600mm/s on high-flow setups
- Net Weight Per Spool: 1.1kg
- Gross Weight Per Spool: 1.35kg
- Length Per Spool: Approximately 330 metres
- Bundle Weight: 5.5kg total across the colour set
- Shrinkage: Low — suitable for large flat geometry
- Winding: Neatly wound, vacuum sealed, bubble-free
- Shelf Life: 1 year in sealed packaging
- Certification: RoHS, REACH
- Compatibility: FDM printers accepting 1.75mm filament
Where It Belongs
Marble PLA earns its place in three workflows. Architectural and interior modelling is the obvious one: scale models, planters, lamp shades and decorative panels where a stone finish is the point rather than a side effect. Product prototyping is the second — a marble surface reads as a finished material sample during a client review, which a glossy single-colour print does not. The third is production of small decorative goods, where a consistent colour across a 5.5kg bundle matters because a batch of twelve identical objects cannot look like it came from two different suppliers. High-flow printers with direct-drive extruders and hardened nozzles will get the most from the 600mm/s ceiling; standard printers simply run it at their own speed.
Frequently Asked Questions
Q: What print temperature should I use?
A: Start at 205 to 220C at the nozzle and 55 to 60C on the bed. Marble PLA behaves like standard PLA thermally, so existing profiles work as a baseline.
Q: Will 600mm/s damage my printer?
A: No. The filament tolerates that rate; your printer determines what it can actually reach. The formulation simply removes filament flow as the limiting factor on high-speed machines.
Q: Do I need a hardened nozzle?
A: For marble-effect PLA, a standard brass nozzle is fine. The effect comes from the pigment, not from abrasive filler such as carbon fibre or metal powder.
Q: Is 5.5kg one spool or several?
A: It is a multi-spool bundle totalling 5.5kg across the colour set, with each spool at 1.1kg net. Colours are consistent across the bundle.
Q: Does it need an enclosure?
A: No. Low shrinkage means large flat parts print without warping on an open-frame printer, though a draft shield helps on very large models.
Q: How should I store it?
A: Reseal with the supplied desiccant or keep it in a dry box. Shelf life is about one year in sealed packaging; ambient humidity is what shortens it.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.