The Plankmaster | 14 to 36-Inch Portable Chainsaw Mill

Economisez 20%
East Supplier PlatformSKU: 1005002858092224-14-48 Inch New-United States

Prix:
$209.14 $261.42

Taxes incluses Frais de port calculés au paiement

Stock:
137 en stock, prêts à être livrés

Description

A fallen oak is worth nothing as firewood and a great deal as lumber. The difference is a straight cut, repeated to a consistent thickness, on a log that will never fit on a table saw. The Plankmaster turns a chainsaw into a sawmill for exactly that job.

The frame is aluminum with galvanized steel uprights, MIG welded rather than bolted together, and the adjustment is set with air-gun carved scales that read thickness directly instead of forcing you to measure between cuts. Cutting thickness runs from half an inch to thirteen inches, height adjustment covers fourteen inches, and the guide accepts bars from 14 to 36 inches depending on the model, which covers everything from a small homeowner saw to a professional powerhead. Positioning holes lock the frame to the bar so the mill cannot creep mid-cut, and anti-loose nuts with large washers hold the setting through the vibration that destroys cheaper mills.

At 6.65 kg it can be carried to the log rather than dragging the log to a machine, and assembly takes four steps with the hardware supplied. The kit includes gloves, two wrenches, a tool bag and a manual - the small things that decide whether the first cut happens the day it arrives or three weeks later after a trip for the right spanner.

The tree already did the hard part. The mill only has to be honest about thickness.


Built Details

  • Accepts 14 to 36-inch chainsaw bars depending on model
  • Cutting thickness adjustable from 1/2 inch to 13 inches
  • Height adjustment across 0 to 14 inches
  • Aluminum frame with galvanized steel uprights, MIG welded
  • Air-gun carved scales for direct thickness reading
  • Positioning holes lock the mill to the bar during the cut
  • 6.65 kg total weight, carried to the log in one hand
  • Four-step assembly with gloves, two wrenches and tool bag included

Mill Specifications

  • MaterialAluminum and galvanized steel
  • WeldingMIG
  • Bar compatibility14 to 36 in / 35.6 to 91.4 cm by model
  • Cut thickness1/2 to 13 in / 1.3 to 33 cm
  • Height adjustment0 to 14 in / 0 to 35.6 cm
  • Weight14.7 lbs / 6.65 kg (36-inch model)
  • Weight, compact model14.2 lbs / 6.45 kg (24-inch model)
  • IncludedMill, gloves, 2 wrenches, tool bag, manual
  • AssemblyFour steps, hardware supplied
  • FinishGalvanized corrosion-resistant uprights
  • UseMilling cedar, walnut, oak and similar hardwood
  • CertificationCE

The Log It Was Made For

The Plankmaster is for the landowner with storm-felled timber, the woodworker who buys logs rather than boards, and the carpenter who wants a species and a thickness that no yard stocks. It is used on site - beside the stump, in a field, on a driveway - because the log does not travel. It suits hardwood and softwood alike, though the chain choice matters more than the mill for hard species. It is not a production sawmill: it cuts one board at a time at a pace set by the saw and the operator, and it is honest about that.

Milling Questions

Q: Which chainsaw do I need?

The mill fits bars from 14 to 36 inches depending on which model you order, so match it to the bar you own. The powerhead matters as much as the bar: milling loads the saw continuously, which is a different duty cycle from cross-cutting firewood.

Q: Do I need a special chain?

Yes, and it is the most common oversight. A ripping chain - filed at a shallower angle - cuts along the grain instead of across it. Cross-cut chain will work and will be slow, hot and rough.

Q: How wide a slab can it cut?

Cut thickness runs from 1/2 inch to 13 inches, and the bar length sets the maximum width of the cut. For wide slabs you need the longer bar and the corresponding powerhead, not a workaround.

Q: Can one person operate it?

The mill is designed for single-operator use: you guide the saw along the log with the frame carrying the reference. A second person helps on the first cuts of a heavy log, mainly to keep it from rolling.

Q: How accurate are the cuts?

The air-gun carved scales read thickness directly and the positioning holes stop the frame shifting on the bar, so repeated boards come out consistent. Accuracy depends on a stable log and an even feed - rushing is what produces a wavy board.

Q: How long does assembly take?

Four steps, with all hardware included, so roughly fifteen minutes the first time. The kit ships with gloves, two wrenches and a tool bag, which is why the first cut is not delayed by a missing spanner.

Q: Will it work on hardwood like oak?

It is explicitly built for cedar, walnut and oak. Hardwood is slower and dulls the chain faster, so expect to sharpen more often than on softwood and to run a modest feed rate.

Q: Does the mill come off easily between uses?

It clamps to the bar with the supplied hardware, so it can be removed and refitted. Keep the bolts and washers in the tool bag - losing one anti-loose nut is the usual reason a mill starts wandering mid-cut.

Q: What is included in the box?

The mill itself, a pair of gloves, two wrenches, a tool bag and the user manual. The chainsaw, bar and chain are not included.

Q: How much does it weigh on the bar?

About 6.65 kg for the 36-inch model and 6.45 kg for the compact 24-inch version - noticeable at the end of a long cut, which is why the frame is aluminum rather than steel.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Emory J.
Buy a ripping chain first

Mill is well made and the anti-loose nuts do their job. What nobody tells you is how much a ripping chain changes the cut, the first board with cross-cut chain was slow and ragged. After swapping chains it was a different tool.

D
Drusilla V.
Light enough to carry to the log

6.65 kg means I walk it into the field rather than dragging timber to a bench. Assembly was fifteen minutes, the wrenches in the box saved a trip to the shed.

Z
Zainab R.
Turned a storm felled oak into boards

First cut was wavy, second was straight, by the fifth it looked milled. The scales read thickness directly so I stopped measuring between cuts. Frame stayed set through four boards of oak.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen