Description
Sunlight Is the Most Democratic Energy Source on Earth. The Helios Array Makes It Portable.
Every hour, the sun delivers more energy to the Earth's surface than humanity consumes in an entire year. The challenge has never been abundance — it has been capture. Rigid glass panels dominated solar for decades because they were efficient, but they were also heavy, fragile, and permanently fixed to rooftops. The Helios Array rewrites that compromise with ETFE (ethylene tetrafluoroethylene) — a fluoropolymer film originally developed for aerospace applications that is lighter than glass, more transparent than acrylic, and flexible enough to conform to curved surfaces.
At 2000 watts of peak output, this monocrystalline panel system generates enough power to run a campsite refrigerator, charge an EV's auxiliary systems, keep communication gear online during extended off-grid stays, or serve as the primary energy source for a tiny home or cabin. The monocrystalline cells — fabricated from a single continuous silicon crystal — deliver conversion efficiency that polycrystalline panels cannot match, especially in partial shade or low-angle sunlight. The ETFE lamination protects these cells from moisture ingress, UV degradation, and physical impact without the weight penalty of tempered glass.
Flexibility changes the deployment equation entirely. Mount The Helios Array on a curved RV roof. Drape it over a boat's deck canopy. Roll it out on uneven ground at a campsite. Stow it in a fraction of the space a rigid panel demands. The integrated charge controller and MC4 connectors make integration with 12V battery systems straightforward — connect to your existing solar charge controller, and the panel begins delivering power within seconds of unfurling. This is solar generation designed for people who move: overlanders, sailors, field researchers, disaster response teams, and anyone who refuses to choose between mobility and energy independence.
Rigid panels tethered you to a fixed roof. The Helios Array rides with you — because energy independence should not require a permanent address.
Key Features
- ✦ 2000W Peak Output — High-density monocrystalline cell array delivers class-leading wattage for off-grid power, campsite energy, RV battery charging, and emergency backup.
- ✦ ETFE Flexible Lamination — Aerospace-grade fluoropolymer film replaces heavy glass. Lighter, more transparent, UV-resistant, and flexible to 30 degrees of curvature.
- ✦ Monocrystalline Silicon Cells — Single-crystal cell structure achieves higher conversion efficiency than polycrystalline, particularly in low-light and partial-shade conditions.
- ✦ Rapid Deployment Design — Roll out, connect MC4 plugs to your charge controller, and generate power in under a minute. No mounting hardware required for temporary setups.
- ✦ 12V Battery System Compatible — Standard output voltage pairs with common lead-acid, AGM, gel, and lithium (LiFePO4) battery banks via any PWM or MPPT charge controller.
- ✦ Weather-Resistant Construction — IP65-rated junction box, sealed MC4 connectors, and hydrophobic ETFE surface that sheds rain and resists dust accumulation.
- ✦ Lightweight & Stowable — At a fraction of the weight of an equivalent rigid glass panel, the Helios Array can be rolled and stored in tight compartments — RV bays, boat lockers, truck bed toolboxes.
Technical Specifications
- Peak Power: 2000W (STC: 1000W/m², AM1.5, 25°C)
- Cell Type: Monocrystalline Silicon, high-efficiency
- Lamination: ETFE (Ethylene Tetrafluoroethylene) flexible film
- Rated Voltage: 12V DC nominal
- Connector Type: MC4 compatible
- Flexibility: Bendable up to 30° curvature
- Junction Box Rating: IP65 weather-resistant
- Operating Temperature: -40°C to +85°C
- Compatible Charge Controllers: PWM and MPPT (12V systems)
- Applications: RV, Marine, Camping, Off-Grid Cabin, Emergency Backup, Field Research
Application Scenarios
The Helios Array is engineered for mobility-first energy users. Overlanders and RV enthusiasts mount it on curved roof surfaces where rigid panels cannot fit, gaining solar capacity without sacrificing aerodynamics. Sailors and powerboaters deploy it on deck canopies and bimini tops, using the flexible form factor to follow the curvature of fiberglass surfaces. Campers and outdoor adventurers roll it out at their campsite for silent, fuel-free power — running 12V refrigerators, LED lighting, and device charging without generator noise. Field researchers and disaster response teams value the rapid deployment: unfurl, connect, and generate power within minutes at remote locations. For off-grid cabin and tiny home owners, it provides primary or supplementary solar generation that can be stowed during harsh winter months and redeployed in spring.
Frequently Asked Questions
Q: How does ETFE compare to traditional glass solar panels?
A: ETFE is lighter (roughly 70% less weight per watt), flexible (bendable to 30°), and more impact-resistant than tempered glass. It transmits more light (95%+ transparency) and is inherently UV-stable — it will not yellow or degrade over decades of sun exposure, which is why NASA uses it in space applications. The trade-off: glass panels have slightly better scratch resistance over decades.
Q: Can I walk on or permanently mount this panel flat on an RV roof?
A: The panel can be semi-permanently mounted using the grommets and adhesive options provided. It tolerates light foot traffic but is not designed as a walkable surface — use designated walkways. For permanent RV mounting, the flexibility allows it to follow roof curvature, which is a significant advantage over rigid panels that require flat mounting surfaces or tilt brackets.
Q: How many panels do I need to run my off-grid setup?
A: Calculate your daily watt-hour consumption, then divide by the average peak sun hours in your location. A single 2000W panel in a location with 5 peak sun hours produces roughly 10,000Wh per day under ideal conditions. Factor in a 20-30% system loss margin for charge controller inefficiency, wiring losses, and suboptimal angle. Most small off-grid cabins run comfortably on 2000-4000W of panel capacity paired with a lithium battery bank.
Q: Does this work with my existing solar charge controller?
A: The MC4 connectors and 12V nominal output are compatible with any standard PWM or MPPT charge controller rated for the panel's voltage and current output. An MPPT controller is recommended to maximize harvest, especially in variable light conditions where the panel voltage may fluctuate.
Q: How durable is the flexible ETFE surface in extreme weather?
A: ETFE was developed for aerospace and architectural applications — it withstands -40°C to +85°C operating range, resists hail impact better than glass, and its hydrophobic surface naturally sheds rain, snow, and dust. The IP65 junction box and sealed MC4 connectors complete the weatherproofing. Sailors have used ETFE flexible panels in saltwater marine environments for years with excellent longevity.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.